1 / 7Polymaker Fiberon PA612-CF15 Carbon-Fibre Nylon Filament, Black, 1.75 mm, 0.5 kg
Polymaker Fiberon PA612-CF15 is a black, carbon-fibre-reinforced nylon filament for 3D printing. Its 1.75 mm diameter and stated 0.5 kg weight suit buyers seeking a reinforced nylon material for functional parts, with customer feedback generally positive on printability but mixed on adhesion, durability and compatibility.
At a glance
- Carbon-fibre-reinforced PA612 nylon, identified as 15% carbon fibre reinforced.
- Manufacturer describes lower moisture sensitivity than PA6/66 and PA6 materials.
- Listed for tooling, automotive applications and end-use parts.
- Manufacturer claims broad printer compatibility, but customer feedback on compatibility varies.
- Resealable vacuum bag with desiccant and a recycled cardboard spool and box are described.
Pros and cons
Pros
- Reinforced nylon composition is intended for functional components where stiffness and mechanical properties matter.
- Dry and wet bending-modulus figures and a heat-deflection figure are provided for material comparison.
- Customer feedback reports positive impressions of quality and ease of printing.
Cons
- Customer feedback reports varying experiences with bed adhesion, durability and printer compatibility.
- The 0.5 kg spool provides a smaller quantity than many larger-spool options.
Technical specifications
9 specifications| Brand | Polymaker |
|---|
| Weight listed | 0.5 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Material listed | Nylon |
|---|---|
| Reinforcement | 15% Carbon Fiber Reinforced PA612 Nylon |
| Colour | 111 - Fiberon Pa612-cf15 1.75mm Black 0.5kg (Hex Code: #302e2f) |
| Heat deflection temperature | HDT(°C) @0.45 MPa: 175 |
|---|---|
| Bending modulus, dry | Bending modulus (dry-MPa): 4583 |
| Bending modulus, wet | Bending modulus (wet-MPa): 3888 |
What to know before buying
Listing details to confirm
The listing describes wide compatibility and good first-layer adhesion, while customer feedback is mixed on printer compatibility and bed adhesion. Treat printability and fit as setup-dependent, and confirm the filament suits your printer and intended process before purchase.
Who is it for?
A good fit for
- 3D-printing users seeking carbon-fibre-reinforced PA612 nylon for tooling, automotive applications or functional end-use parts.
- Buyers who want a small 0.5 kg quantity and can assess printer compatibility and material handling for their setup.
Less suited to
- Buyers who need consistently trouble-free adhesion or compatibility across an unspecified printer setup.
- Projects requiring a larger quantity than the listed 0.5 kg spool.

Customer reviews on Amazon
- 5 stars
84% 84% - 4 stars
8% 8% - 3 stars
2% 2% - 2 stars
2% 2% - 1 star
4% 4%
Customer feedback highlights positive impressions of quality and printability, while experiences with durability, bed adhesion and printer compatibility vary. That matters for a reinforced nylon filament intended for functional parts: the listed material properties may be relevant to the application, but they do not guarantee a particular print outcome on every setup.
Positive themes
- Customers report good quality and easy printing.
Mixed feedback
- Customers report mixed experiences with durability.
- Experiences with bed adhesion and compatibility vary.
Frequently asked questions
What material is this filament?
The listing identifies it as nylon, specifically PA612 with 15% carbon-fibre reinforcement.
What diameter and quantity are listed?
The listed filament diameter is 1.75 millimeters and the listed weight is 0.5 kg.
Is it suitable for any 3D printer?
The manufacturer claims compatibility with most consumer printers, but compatibility depends on the printer and setup. Customer feedback also reports mixed compatibility experiences.
What does the listing say about moisture sensitivity?
The manufacturer describes it as less moisture-sensitive than PA6/66 and PA6 materials, and says it comes vacuum-sealed with desiccant in a resealable bag.

Alternative options

ELEGOO PAHT-CF 1.75 mm Black 1KG High Temp Carbon Fiber Nylon | 3D Filament, 1 KG Spool, High Strength & Rigidity, Corrosion Resistance, Fits for Most Enclosed FDM 3D Printers
$67.14

Creality Carbon Fiber Filament 1.75mm for K1C, 3D Printer Filament Designed for High Speed 50-300mm/s, 1kg(2.2lbs)/Spool Hyper PLA-CF Filament, Dimensional Accuracy ± 0.03 mm (Black)
$23.75

Polymaker ASA Filament 1.75mm Black 1KG, UV & Weather Resistant | Outdoor Functional Parts, Durable, High Heat Resistant, Impact-Resistant, Reliable Layer Adhesion, 3D Printer Filament
$24.99

SainSmart 1.75mm Black ePA-CF Carbon Fiber Filled Nylon Filament 1KG (2.2lbs) Spool for 3D Printer
$84.99

Creality Hyper PETG-CF Filament 1.75mm, PETG Carbon Fiber Filament for High Speed 30-600mm/s, 3D Printing Materials for Most 3D Printers K1C K2 Plus, 1kg Dusk Blue
$27.99

ELEGOO Carbon Fiber PLA Filament 1.75mm Black 1KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 1kg Spool 3D Printing Filament, Fits for Most FDM 3D Printers
$23.39

Creality Hyper PETG Filament 1.75mm for K1 Max, 3D Printer Filament Designed for High Speed 30-600mm/s, 1kg(2.2lbs)/Spool, Dimensional Accuracy ± 0.03 mm Black
$25.49

ELEGOO Glass Fiber PETG-GF 3D Printer Filament 1.75mm Black 1KG | PETG-GF 1KG Spool, High Stiffness, Electrical Insulation, Weather Resistant, Fits for Most FDM 3D Printers
$26.34

Vimin 16-Port 2.5G Multi-Gigabit Unmanaged Ethernet Switch Plug&Play | 2.5G Ethernet Switch 120Gbps Capacity, Metal Housing, Fanless, Desktop or 19-inch Rack Mount
$249.99

10-Port Gigabit PoE Switch with 8 Port PoE, VIMIN 8-Port Unmanaged 10/100/1000Mbps Network PoE Switch with 2 Uplink Ports, AI Watchdog, VLAN, Extend 250m, Support IEEE802.3af/at
$59.98

TRENDnet Ethernet Over Coax MoCa 2.5 Adapter (2-Pack), TMO-312C2K | Backward Compatible with MoCA 2.0/1.1/1.0, RJ-45 Gigabit LAN Port,Supports Net Throughput up to 1Gbps, Support up to 16 Nodes
$124.07

Jeirdus MPO-MPO Patch Cord, OM4 Multimode Fiber, 12-core Fiber for QSFP+ Transceivers, 20-meter(65ft) 12 Strands
$129.31























