Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker Light Weight PLA Filament, 1.75 mm, White, 0.8 kg

Polymaker Light Weight PLA is a low-density white filament for 3D printing, model PA08002. Its pre-foamed formulation is described as printing without active foaming, with settings similar to regular PLA, making it a candidate for lightweight parts such as RC aircraft components.

At a glance

  • Low-density PLA is presented for lighter printed parts, including RC plane components.
  • Listing describes the filament as pre-foamed, with no active foaming during printing.
  • The claimed matte surface is described as easier to paint and less revealing of layer lines.
  • Manufacturer guidance gives PLA-like printing settings and recommends turning off the fan for the first layer to improve bed adhesion.
Price
$26.39Save 12%

Reference price: $29.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • A stated 0.8 g/cm3 density is lower than the regular PLA comparison given in the listing, which may suit weight-sensitive prints.
  • Manufacturer describes high rigidity and good layer adhesion for stiff components.
  • The matte finish is described as paint-friendly.

Cons

  • Customer feedback reports first-layer adhesion concerns, which may require attention to bed preparation and the stated first-layer fan guidance.

Technical specifications

17 specifications
Identity
BrandPolymaker
ModelPA08002
Dimensions and installation
Dimensions listed20 x 20 x 6 cm; 800 g
Weight listed0.8 kg
Materials and protection
Material listedPolylactic Acid
Filament diameter1.75 millimeters
Colour listed115 - Polylite Lw-pla 1.75mm White (Hex Code: #Edd7bf)
Print settings
Nozzle temperature190–220°C
Bed temperature35–50°C
Cooling fan80%
Print speed50–100 mm/s
Max volumetric speed4mm/s
Retraction distance2.5 mm
Retraction speed40mm/s
Build surfacePC or textured PEI build surface (glue if needed)
Enclosureno enclosure required
Drying instructionsdry at 55°C for 6 hours before use

What to know before buying

Listing details to confirm

The filament is described as pre-foamed and non-foaming in use, while the title and other copy call it low-density or lightweight PLA. Follow the listed settings rather than assuming it behaves like traditional actively foaming lightweight filament. The listing recommends turning off the fan for the first layer, but gives 80% cooling fan in its general settings. The listed maximum volumetric speed is 4mm/s, so confirm that this value and your printer's settings are appropriate before printing.

Who is it for?

A good fit for

  • 3D printer owners seeking a low-density PLA for weight-conscious models such as RC aircraft.
  • Makers who want a matte white print that can be painted.

Less suited to

  • Buyers who need consistently trouble-free first-layer adhesion without tuning or surface preparation.
  • Those looking for an explicitly confirmed print speed or volumetric-flow profile beyond the supplied recommendations.
Polymaker Light Weight PLA Filament, 1.75 mm, White, 0.8 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 95 ratings
  • 5 stars65%65%
  • 4 stars15%15%
  • 3 stars7%7%
  • 2 stars5%5%
  • 1 star8%8%

Customer feedback includes positive impressions of overall quality, but reports adhesion concerns, including weaker first-layer adhesion and filament binding on the paper spool. Views on printability, performance and weight are mixed. For buyers making lightweight parts, those experiences make first-layer setup and the intended weight benefit worth assessing alongside the manufacturer's stated settings. The aggregate ratings are generally favourable but include a range of scores, so they do not establish uniformly consistent results.

Positive themes

  • Customer feedback describes the filament's overall quality positively.

Negative themes

  • Customers report first-layer adhesion concerns and filament binding on the paper spool.

Mixed feedback

  • Customer feedback is mixed on printability, performance and filament weight.

Frequently asked questions

Does this filament foam during printing?

The listing describes it as pre-foamed and says it will not foam during printing, unlike traditional active-foaming lightweight PLA.

What printer settings are listed?

The recommended values include a 190–220°C nozzle, a 35–50°C bed, 50–100 mm/s print speed and 80% cooling fan. The listing separately advises turning the fan off for the first layer to improve adhesion.

Is this suitable for RC plane parts?

The manufacturer promotes it for lightweight RC plane parts and describes it as low-density and rigid. Results depend on the design and print setup.

How much filament is supplied?

The listing identifies the spool weight as 0.8 kg and the unit count as 800 gram.

Polymaker Light Weight PLA Filament, 1.75 mm, White, 0.8 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge

C$31.63

C$25.54

-19%
-19%
Product details in Markdown