Loonie PerksDeals for Canada
BlogSearch
Product guide

JUSTMAKER PLA Silk Copper 3D Printer Filament, 1.75 mm, 1 kg

JUSTMAKER PLA Silk is a copper-coloured PLA filament listed for 1.75 mm printers and decorative prints. Its claimed glossy, shimmering finish suits models where appearance matters, while the stated printing ranges and mixed customer feedback on adhesion and durability are worth considering.

At a glance

  • Silk finish is described as shimmering and high-gloss, intended to bring out colour in decorative models.
  • The stated diameter is 1.75 millimeters, with a 1 kg listed weight.
  • Suggested settings are 210℃-230℃ nozzle temperature, 30-60°C platform temperature, and 40-80 mm/s printing speed.
  • The manufacturer says the filament is compatible with most common printer models, including Bambu Lab.
Price
$18.99Save 21%

Reference price: $23.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • The glossy silk surface and copper colour are tailored to decorative prints where finish and colour are priorities.
  • The listing gives specific temperature and speed ranges to guide initial slicer settings.
  • The claimed cardboard spool design includes storage holes and is presented as easier to recycle.

Technical specifications

10 specifications
Identity
BrandJUSTMAKER
ModelPLA Silk-COP-1.75-1KG
Material and appearance
Material listedPolylactic Acid
ColourCopper 2442c
Dimensions and installation
Weight listed1 kg
Filament diameter1.75 millimeters
Suggested print settings
Printing temperature210℃-230℃
Printing speed40-80 mm/s
Manufacturer performance claims
Impact-strength comparisonMore than 30% higher impact strength than ordinary PLA
Diameter-control claimAdvanced diameter control and defect detection technology are used for no bump defects

What to know before buying

  • The claimed impact-strength improvement over ordinary PLA and compatibility with common printers are manufacturer statements, not independently verified performance. Confirm that 1.75 mm filament and the stated settings suit your printer. The listing's recommendation to keep filament dry also makes storage conditions relevant.

Who is it for?

A good fit for

  • 3D-printing users seeking a glossy copper finish for decorative models.
  • Owners of printers configured for 1.75 mm filament who can tune settings within the supplied ranges.

Less suited to

  • Buyers who need documented durability or adhesion performance, since customer feedback is mixed on both.
  • Anyone whose printer requires a filament diameter other than 1.75 mm.
JUSTMAKER PLA Silk Copper 3D Printer Filament, 1.75 mm, 1 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 269 ratings
  • 5 stars76%76%
  • 4 stars14%14%
  • 3 stars7%7%
  • 2 stars1%1%
  • 1 star2%2%

Customer feedback highlights positive impressions of print quality, colour, appearance, and finish, alongside mixed experiences with durability and adhesion. For decorative work, the favourable finish comments may matter most, while buyers making parts that depend on reliable adhesion or toughness should treat those outcomes as uncertain. The listing's impact-strength comparison is a manufacturer claim, not customer-verified proof.

Positive themes

  • Feedback is positive about print quality and the filament's colour, appearance, and finish.

Mixed feedback

  • Customer feedback is mixed on durability and bed adhesion.

Frequently asked questions

What diameter and weight are listed?

The listing specifies a diameter of 1.75 millimeters and a weight of 1 kg.

What print settings does the listing suggest?

It gives a printing temperature of 210℃-230℃, a platform temperature of 30-60°C, and a printing speed of 40-80 mm/s. Treat these as starting guidance and adjust for your printer.

What kind of finish is this filament intended to produce?

The manufacturer describes a shimmering, high-gloss silk surface intended to enhance colour expression, particularly on decorative models.

What do customers report about print results?

Customer feedback is generally positive about print quality, colour, appearance, and finish, but reports are mixed on durability and adhesion.

JUSTMAKER PLA Silk Copper 3D Printer Filament, 1.75 mm, 1 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge

C$31.63

C$25.54

-19%
-19%
Product details in Markdown