1 / 6FLASHFORGE ABS Pro ABS-1 1.75 mm Black Filament, 1 kg
FLASHFORGE ABS Pro ABS-1 is a black ABS filament spool for FFF 3D printers. The listing describes reduced shrinkage and a recommended 220~240℃ printing range, while also noting that a heated setup and suitable printer are required.
At a glance
- ABS filament in black, with a stated diameter of 1.75 millimeters and listed weight of 998 g.
- The listing recommends 220~240℃ nozzle temperature, 60~90mm/s printing speed and a 50~100℃ build plate.
- The manufacturer describes reduced shrinkage, less warping, shock resistance and easy-to-remove supports.
- The listing says this material needs a heated setup and a printer capable of handling higher demands.
Pros and cons
Pros
- The stated 1.75 mm diameter and recommended print settings give buyers concrete compatibility and setup details to compare with their printer.
- Reduced shrinkage and lower warping are claimed benefits for functional ABS prints, where dimensional stability may matter.
- The listing claims low odour and describes the material as suitable for heat-resistant functional parts.
Cons
- ABS printing has setup demands: the listing specifies a required printing substrate and a heated, higher-demand printer.
Technical specifications
13 specifications| Brand | FLASHFORGE |
|---|---|
| Model | ABS-1 |
| Material listed | Acrylonitrile Butadiene Styrene |
|---|---|
| Colour | Black |
| Filament diameter | 1.75 millimeters |
| Weight listed | 998 g |
| Recommended printing temperature | Printing temp range recommended: 220~240℃ |
| Recommended printing speed | 60~90mm/s |
| Build plate temperature | 50~100℃ |
| Printing substrate | required |
| Parcel dimensions and weight | 21.59 x 21.59 x 7.62 cm; 997.9 g |
|---|
| Additional features | Reduced Shrinkage, Low Odor, Low Warping, Comfortable Printing Environment |
|---|---|
| Dimensional accuracy in title | +/- 0.02mm |
What to know before buying
Listing details to confirm
The stated 998 g item weight and 997.9 g parcel weight are close but not identical, and the title's 1 kg spool description is not the same as either listed weight. The claimed +/- 0.02mm accuracy and low-odour or environmental statements are not independently confirmed. The product details also say the filament applies to most FFF printers while warning that it needs a heated, high-demand printer, so confirm your printer and build-plate setup before buying.
Who is it for?
A good fit for
- People printing ABS functional parts who need black, 1.75 mm filament and can meet the listed temperature and substrate requirements.
- Owners of a heated FFF printer who want to compare the maker's recommended settings with their own machine's capabilities.
Less suited to
- Users seeking a filament for an unheated or otherwise low-demand printer setup.
- Buyers who require independently confirmed dimensional accuracy, print performance or low-odour claims.

Customer reviews on Amazon
- 5 stars
79% 79% - 4 stars
6% 6% - 3 stars
5% 5% - 2 stars
2% 2% - 1 star
8% 8%
Customer feedback describes the ABS quality positively overall, while reports on reliability, print quality, value and adhesion are mixed. That variation matters for ABS, since the listing specifies a heated, higher-demand setup and a required substrate, so buyer results may depend on printer and bed conditions. The aggregate ratings lean favourable, but they do not establish consistent results for every setup.
Positive themes
- Some customer feedback describes the ABS quality as decent.
Mixed feedback
- Customer feedback reports varying experiences with reliability, print quality, value for money and adhesion.
Frequently asked questions
What printer setup does this filament call for?
The listing recommends 220~240℃ printing temperature, 60~90mm/s speed and a 50~100℃ build plate. It also says a printing substrate is required and describes ABS as needing a heated, higher-demand printer.
Is the filament suitable for any 1.75 mm printer?
Not necessarily. Although the listing says it applies to most FFF printers, it also warns that a heated setup and higher-demand printer are needed. Confirm your printer's ABS compatibility and build surface.
What are the stated weight and dimensional accuracy?
The details list a weight of 998 g, while parcel details state 997.9 g. The title claims +/- 0.02mm dimensional accuracy, which is a listing claim rather than an independently confirmed measurement.

Alternative options

Creality ABS Filament 1.75mm, 3D Printer Filament, Excellent Resistance, Odorless Non-Toxic, Stability, Tough, 1kg(2.2lbs) Printing Filament for 3D Printer (Black)
$21.99

JUSTMAKER ABS PRO (ABS+) 3D Printer Filament, Upgraded Strength Heat Resistant Filament, Cardboard Spool, Dimensional Accuracy +/-0.03mm, 1.75mm, 1kg (2.2 lbs), Black

ANYCUBIC Rapid PETG 3D Printer Filament 1.75mm, Max 600mm/s High Speed Printing, Dimensional Accuracy +/- 0.03mm, Reusable Spool, Fit Most FDM Printer, 1KG, Black
$23.99

ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG, Vibrant Color | Neatly Wound for Smoother Feeding, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), Fit Most FDM 3D Printers
$17.99

Creality Official 3D Printer Filament, Hyper PLA Filament 1.75mm for High-Speed Printing, Neatly Wound Filament, Durable and Strong Toughness Dimensional Accuracy +/-0.02mm, 2.2lbs(1kg)/Spool, Black
$23.99

Upgraded 0.4mm Quick-Swap Nozzle for Flashforge Integrated Adventurer 5X 3D Printer,Detachable Rapid Heating 3D Printer Nozzle Support High Flow Printing Compatible with Flashforge AD5X-2PCS
$21.59

ANYCUBIC PLA Plus 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, PLA+ Filament with Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 4KG Spool, Black
$55.99

FLASHFORGE AD5X 3D Printer Enclosure Kit,3D Printer Enclosure Safer and Quieter Cover Protection,DIY Design for AD5X 3D Printer Unlock High Temperature Filament Like ABS,ASA and PC (AD5X)
$55.20

ANYCUBIC Rapid PETG 3D Printer Filament 1.75mm, Max 600mm/s High Speed Printing, Dimensional Accuracy +/- 0.03mm, Reusable Spool, Fit Most FDM Printer, 1KG, Grey
$23.99

FLASHFORGE Adventurer 5M 3D Printer Enclosure Kit, Enclosure Safer and Quieter Cover Protection,DIY Design for AD5M 3D Printer Unlock High Temperature Filament Like ABS,ASA and PC
$47.99

3pcs Filament Cutter for Flashforge Creator 5 Pro | Manual Cutting Lever for Clean Filament Unloading, Replacement Toolhead Spare Parts for Creator 5 & 3d Printer

ELEGOO PLA PRO 3D Printer Filament 1.75mm Black 2KG | Improved Rigidity Easy to Print, Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Spools for Most FDM 3D Printers
$33.14























