1 / 7ELEGOO ABS-Like Resin 3.0 Pro, Grey, 1000 g
ELEGOO ABS-Like Resin 3.0 Pro is a grey 405 nm photopolymer resin listing for MSLA, DLP and LCD printers. Its claimed tougher, heat-resistant printed parts may suit functional models and miniatures, though customer feedback is mixed on brittleness and printability.
At a glance
- Listing claims printed models have higher scratch resistance and heat resistance than the standard ABS-Like 3.0 resin.
- Manufacturer describes the cured material as bendable and tough, with high hardness.
- Claimed print characteristics include dimensional accuracy, smooth surfaces and minimal warping or shrinkage.
- Suggested applications include miniatures, figures, jewellery design, education and functional replacement parts.
Often bought together
Pros and cons
Pros
- The 405 nm listing covers MSLA, DLP and LCD resin-printer technologies.
- The stated 1000 g quantity and grey colour make the package choice straightforward.
- Durability and reduced heat deformation are relevant claims for functional models, not just display pieces.
Technical specifications
6 specifications| Brand | ELEGOO |
|---|---|
| Model | EL-3D-AR002 |
| Colour | Grey |
|---|---|
| Resin type | 405nm UV Resin |
| Printer technologies listed | MSLA/DLP/LCD |
| Dimensions listed | 9.7 x 9.7 x 22 cm; 1.17 kg |
|---|
What to know before buying
- The dimensional listing combines package dimensions and weight, so 1.17 kg should not be read as the stated resin quantity, which is listed separately as 1000 g. Performance statements are manufacturer claims, not independent measurements. Customer feedback also reports mixed experiences with brittleness and printability, so results may depend on the intended model and printing setup.
Who is it for?
A good fit for
- Resin-printer users seeking grey material for MSLA, DLP or LCD workflows.
- Makers printing miniatures, figures, prototypes or functional parts who value the claimed toughness and heat resistance.
Less suited to
- Buyers who need verified print settings, quantified heat-deformation limits or measured mechanical properties, none are supplied here.
- Anyone specifically seeking filament rather than liquid photopolymer resin.

Customer reviews on Amazon
- 5 stars
81% 81% - 4 stars
8% 8% - 3 stars
3% 3% - 2 stars
4% 4% - 1 star
4% 4%
Customer feedback is broadly positive about reliability and value, with many five-star ratings in the supplied distribution. However, reports are mixed on brittleness and printability. That distinction matters because the product is promoted for tough, bendable models, but those claims do not ensure consistent results for every printer, setup or part.
Positive themes
- Customer feedback highlights reliability and perceived value.
Mixed feedback
- Customer feedback reports varying experiences with brittleness and printability.
Frequently asked questions
Which printer types is this resin listed for?
The listing names MSLA, DLP and LCD printers and describes the resin as 405 nm UV resin. Confirm that your printer's light source and resin workflow are compatible.
What quantity and colour are listed?
The resin is listed as grey with a unit count of 1000 g.
Is this resin claimed to resist heat and scratches?
Yes. The manufacturer claims higher scratch resistance and says heat deformation temperature is about 10% higher than ABS-Like 3.0 resin. These are listing claims, not independently verified results.
What do customers report about brittleness and printability?
The supplied feedback describes mixed experiences in both areas. Treat the durability claims as a guide rather than a guarantee for every print.

Alternative options

ELEGOO 8K ABS-Like 3D Printer Resin Space Grey 2000g | 405 nm Photopolymer Resin for 12K/14K/16K Mars Saturn Jupiter MSLA DLP LCD 3D Printing with Strength and Toughness
$38.99

ELEGOO ABS-Like Resin 3.0+, Upgraded 3D Printer Photopolymer Resin, Higher Heat-Resistance Fast Curing High Precision Non-Brittle, Translucent 1000Gram
$21.99

ELEGOO 2.0 Water Washable 3D Printer Resin 2KG, Easy to Clean, UV Curing Photopolymer Resine for Mars Saturn Jupiter MSLA DLP LCD 3D Printing, 385-405nm UV Curing LCD 3D Printing Liquid (Ceramic Grey)
$37.83

ANYCUBIC ABS-Like Resin 3.0 3D Printer Resin (2kg, Gray) | High Strength & Toughness, Low Odor 405nm UV Curing Resin with High Precision, Widely Compatible with LCD DLP 3D Printing
$36.09

ELEGOO Water Washable 3D Printer Resin Ceramic Grey 1000g | 405 nm UV Curing Photopolymer résine for Mars Saturn Jupiter MSLA DLP LCD imprimant with Low Odor
$20.06

ELEGOO 8K Water Washable ABS-Like Resin Space Grey 2000g | High Toughness, Low Odor, Perfect for Miniatures, Prototypes & Functional Parts, Compatible with MSLA/DLP/LCD 3D Printers
$41.35

ELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000g | High Strength and Toughness, High Precision, Low Viscosity, UV-Curing Photopolymer résine for MSLA DLP LCD 3D Printers
$20.99

ELEGOO Water Washable 2.0 3D Printer Resin Ceramic Grey 1000g | Fast Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing, 385-405 nm UV Curing 3D Printing Liquid
$22.87

ELEGOO Water Washable ABS-Like 3D Printer Resin Ceramic Grey 1000g | High Durability and Toughness, Low Odor, Wide Compatibility for Mars Saturn Jupiter MSLA DLP LCD imprimant
$24.63

ELEGOO 8K ABS-Like 3D Printer Resin Space Grey 1000g | 405 nm Photopolymer Resin for 12K/14K/16K Mars Saturn Jupiter MSLA DLP LCD 3D Printing with Strength and Toughness
$22.99

ELEGOO ABS-Like Resin 3.0+, Upgraded 3D Printer Photopolymer Resin, Higher Heat-Resistance Fast Curing High Precision Non-Brittle, Grey 1000Gram
$20.99

ELEGOO Standard 3D Printer Resin Grey 1000g | 405 nm LCD UV-Curing Photopolymer résine for Mars Saturn Jupiter MSLA DLP LCD 3D Printing
$17.99

























