1 / 7DURAMIC 3D PLA+ Filament, Black, 4 × 1 kg, 1.75 mm
DURAMIC 3D PLA Plus is a four-spool black PLA+ filament bundle for compatible 3D printers. Its 1.75 mm diameter and claimed higher toughness suit users who want a larger supply of one colour, though customer feedback also mentions breakage, stringing and variable adhesion.
At a glance
- Four black spools provide a listed total of 4 kg of PLA+ filament.
- The listing describes PLA+ as tougher than ordinary PLA and suited to functional models requiring higher toughness.
- The manufacturer describes the spool as transitioning to cardboard, while the product title specifies a cardboard spool.
- Recommended print settings are supplied for nozzle temperature, bed temperature and speed.
Pros and cons
Pros
- Four 1 kg spools of the same colour can support longer print runs without changing filament colour.
- The stated diameter and printing settings provide useful starting points for setup.
- The manufacturer claims improved toughness over ordinary PLA, which may appeal for functional prints.
Cons
- Customer feedback includes reports of filament breaking and stringing, which may require troubleshooting during printing.
- Customer opinions on adhesion vary, so results may depend on printer setup and print conditions.
Technical specifications
11 specifications| Brand | DURAMIC 3D |
|---|---|
| Model | DSA070015 |
| Weight listed | 4 kg |
|---|
| Material listed | Polylactic Acid |
|---|
| Filament diameter | 1.75 millimeters |
|---|---|
| Diameter tolerance | 1.75 mm+/- 0.05 |
| Recommended nozzle temperature | 220±10°C (410℉ - 446℉) |
| Heated bed temperature | 25°C - 60°C (77℉ - 140℉) |
| Dimensional accuracy claim | 100% ±0.05mm, 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm |
| Colour | 4*1kg Black |
|---|---|
| Spool count | 4 |
What to know before buying
Listing details to confirm
The listing gives both a general diameter tolerance of 1.75 mm+/- 0.05 and a separate distribution of accuracy claims, including 99% ±0.03mm. It also describes a gradual change from plastic to cardboard spools, while the title identifies a cardboard spool. Confirm the tolerance details and spool version for the selected listing. Store unfinished filament sealed with desiccant, secure its tip in a storage hole to limit tangles, and level the build plate as advised.
Who is it for?
A good fit for
- Makers who want a bulk supply of black PLA+ in four 1 kg spools.
- Users printing functional models who want to try a PLA+ material marketed for higher toughness.
- Print setups configured for 1.75 mm filament that can use the listed temperature and speed ranges.
Less suited to
- Buyers who need a confirmed spool material or a single unambiguous dimensional-accuracy tolerance before ordering.
- Users seeking filament with consistently trouble-free adhesion, stringing or breakage based on customer feedback.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
15% 15% - 3 stars
5% 5% - 2 stars
3% 3% - 1 star
6% 6%
Customer feedback reports good print quality and overall function, while also noting filament breakage and stringing, with mixed experiences around adhesion. These accounts matter for users planning longer prints with this 1.75 mm PLA+ bundle, because interruptions or tuning may affect print outcomes. The listing’s toughness and jam-free language are manufacturer claims, not proof that every spool will avoid these reported issues.
Positive themes
- Customers report good print quality and satisfactory overall performance.
Negative themes
- Some customers report filament breaking during prints and stringing.
Mixed feedback
- Customer experiences with adhesion vary.
Frequently asked questions
How many spools are listed?
The listing identifies four spools, each described as 1 kg, for a total listed weight of 4 kg.
What diameter is the filament?
The listed item diameter is 1.75 millimeters. The description also gives a 1.75 mm+/- 0.05 diameter tolerance and a separate accuracy distribution, so check which specification applies to the selected spool.
What print settings does the listing recommend?
It gives a nozzle temperature of 220±10°C (410℉ - 446℉), a heated bed temperature of 25°C - 60°C (77℉ - 140℉), and a printing speed of 40-80mm/s.
Does the bundle include cardboard spools?
The title specifies a cardboard spool, but the description says the change from plastic to cardboard is gradual. Confirm the spool version for the selected listing.

Alternative options

Colourbing Pre-Dried 8KG PLA+ 3D Printer Filament, Tougher PLA+ Filament 1.75mm Neatly, Dimensional Accuracy±0.03 mm, High Speed 3D Printing Filament Bundle for Beginner Friendly, 8 Spools 1KG Each
$109.99

ELEGOO PLA+ Filament 1.75mm Black 4KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$51.84

Creality PLA Plus (PLA+) Filament 1.75mm 4KG, 3D Printer Filament Cardboard Spool, Strong Toughness, No-Tangling, Accuracy +/-0.02mm, Multi-Color 3D Printing Filament (Black White Grey Rainbow)
$70.39

ELEGOO PLA 3D Printer Filament 1.75mm 4KG 4-Color Bundle, Vibrant Colors | Neatly Wound for Smoother Feeding, Black/White/Dark Blue/Ture Red, +/- 0.02mm, 4pcs 1kg Spools, Fit Most FDM Printers
$53.99

AMOLEN Silk PLA 3D Printer Filament Bundle, Shiny Dual Color Filament 1.75mm Pack, Multi Color Change 3D Printing Filament for Most FDM 3D Printer, 4 Spools 200g Each
$34.19

OVERTURE 2KG Bundle High Speed PLA+ 3D Printer Filament 1.75mm | Upgraded Rapid PLA 2.0 with Enhanced Toughness & Stability, 2 Pack 1kg Spool (2.2lbs) Fit Most FDM 3D Printers (Black*2)
$31.99

GIANTARM PLA 3D Printer Filament, Blue PLA Filament with 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging, for Most 3D FDM Printer (PLA-New Blue)
$25.99

OVERTURE High Speed PLA+ 3D Printer Filament 1.75mm, 1kg Black | Upgraded Rapid PLA 2.0 with Enhanced Toughness & Stability, 1kg Spool (2.2lbs) Fit Most FDM 3D Printers (Black)
$17.59

ELEGOO PLA+ Filament 1.75mm White 2KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$34.19

NEWBANG 4 Pack Commercial Keyed Entry Door Lever Grade 2 Heavy Duty | Grade 2 ADA commercial lever, UL 3-hour fire rated. Rekeyable cylinder, 70mm backset, reversible LH/RH.
$259.88

Polymaker HT-PLA Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$24.63

ELEGOO PLA+ Filament 1.75mm White 1KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$20.39























