1 / 7Anycubic Photon P1 Max 12K Resin 3D Printer, 18.3 L
Anycubic Photon P1 Max is a large-format MSLA resin 3D printer listing an 18.3 L build volume and a 14-inch 12K mono screen. Its generous stated capacity suits larger models or batches, while its listed dimensions call for a substantial installation space.
At a glance
- Large listed build area is aimed at printing sizable resin models or multiple smaller pieces in one run.
- The listing specifies a 14-inch 12K mono screen and 24.8×24.8μm square pixels.
- Smart Leveling System 3.0 is described as factory-precalibrated, with an automatic check before printing.
- Smart Assistant 3.0 is claimed to monitor resin levels, detect residue and verify bed installation.
- Photon Workshop 4.0 is listed with resin profiles and AI-assisted supports.
Often bought together

ANYCUBIC ABS-Like Resin Pro 2 3D Printer Resin (2kg-Gray) | Toughness Upgrade, Low Odor 405nm UV-Curing Resin, High Precision and High-Success Rate Photopolymer Resin for LCD 3D Printer
$35.99

Anycubic Air Purifier 2.0 with Vant, Supports Connecting Two Devices, for 3D Printer Photon Mono 4/4 Ultra/M7/M7 Pro/M7 Max, Saturn/Mars Series and Anycubic Kobra S1, Ventilation Exhaust Low Odors
$31.99
Pros and cons
Pros
- The claimed 18.3 L capacity can accommodate larger models or grouped parts without splitting them as often.
- The listed 12K screen and square pixel size provide concrete detail-oriented specifications for fine resin prints.
- Automatic leveling checks and listed resin and bed monitoring could reduce routine setup steps.
Cons
- Its listed dimensions of 75D x 51W x 53H centimetres require considerable bench or floor space.
Technical specifications
11 specifications| Brand | ANYCUBIC |
|---|---|
| Model | PP1MBK0B-M |
| Technology | MSLA |
|---|---|
| Compatible material | Resin |
| Claimed build volume | 18.3L |
| Claimed build dimensions | 285.5×214×300mm |
| Screen | 14-inch 12K mono screen |
| Pixel size | 24.8×24.8μm square pixels |
| Dimensions listed | 75D x 51W x 53H centimetres |
|---|
| Repeat positioning accuracy | ±0.01mm |
|---|---|
| Build plate flatness tolerance | <80μm |
What to know before buying
- The title and feature text claim an 18.3 L build and give build dimensions of 285.5×214×300mm, but the supplied listing provides no independent confirmation of these performance specifications. Accuracy, surface-finish, reliability and failure-reduction statements are manufacturer claims, not verified results. Allow for the substantial listed outer dimensions when planning installation.
Who is it for?
A good fit for
- Makers planning large resin models or batches of smaller parts.
- Users seeking a resin printer with a high-resolution mono screen and listing-described automated checks.
- Workspaces with room for a large-format resin printer.
Less suited to
- Buyers who need a compact printer or have limited installation space.
- Those seeking an independently verified production-speed, reliability or print-quality assessment.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
The supplied ratings are uniformly five-star, but the sample is only two ratings and includes no written customer feedback. That is too little evidence to identify a recurring strength or concern, so weigh the printer's listed large build and substantial footprint against your needs rather than treating the ratings as proof of performance.
Frequently asked questions
What printing technology does the Photon P1 Max use?
The listing identifies it as an MSLA printer compatible with resin.
How large is its stated build volume?
The title and feature text claim 18.3 L, with build dimensions of 285.5×214×300mm. Treat these as listing claims rather than independently verified measurements.
How much space does it need?
The listed product dimensions are 75D x 51W x 53H centimetres, so plan for a substantial installation area.
Does the listing describe automatic checks?
Yes. It describes a pre-print leveling check and assistant functions for monitoring resin levels, detecting residue and checking bed installation. These are manufacturer claims.

Alternative options

ELEGOO Mars 5 Ultra 9K Resin 3D Printer, 150mm/h High Speed Printing, Smart Automatic Leveling, Intelligent Detection, WiFi-Transfer, Printing Size of 153.36 x 77.76 x 165 mm³
$408.49

ELEGOO Saturn 4 Ultra 16K Resin 3D Printer | 10" 16K Mono LCD and Flip-up Lid, Smart Tank Heating at 30 °C, Large Printing Size of 8.33 × 4.66 × 8.66 Inches
$624.79

ANYCUBIC Kobra S1 ACE 2 Pro Combo Multi-Color 3D Printer, Up to 16-Color Printing, Fully Enclosed CoreXY, 600 mm/s High Speed, 320°C Hotend & Auto Leveling, Filament Drying, 250×250×250 mm³
$699.99

ANYCUBIC Photon P1 14K Resin 3D Printer, Industrial Ball Screw | Auto Leveling, 8000cps Resin Compatible, Ideal for Prototypes, Customization and Jewelry Casting, Print Size 8.78x4.96x9.05in
$689.99

Anycubic Kobra X 3D Printer Only, 4 Built-in Colors for Beginners | LeviQ 3.0 Auto Leveling,600mm/s High Speed, No Filament Included, 300℃ Nozzle, Built-in Camera, Print Size 260 x 260 x 260 mm
$479.00

ANYCUBIC Kobra S1 ACE 2 Pro Combo 600 mm/s High Speed 3D Printer, LeviQ 3.0 Auto Leveling, Quick Detachable 320℃ Hotend, 65℃ Filament Drying, Ultra-Quiet 44dB, 250x250x250mm Print Size
$689.69

Revopoint MetroY Ultra 3D Scanner, Up to 90 FPS, for 3D Printing, Standard | 0.01mm, Blue Laser/Structured Light, 5 Modes, Anti-Shaking, Industrial 3D Modeling/Measurement, Wireless Outdoor Scan
$2,819.00

ANYCUBIC 3D Printer Resin, Standard Resin (Gray, 1kg) | 405nm SLA UV-Curing Resin, High Precision & Rapid Photopolymer for LCD/DLP/SLA 3D Printing
$18.99

ANYCUBIC 10K Resin 3D Printer, Photon Mono 4 | with 7-inch Mono Screen, Upgraded LighTurbo Matrix and Printing Platform, Printing Size of 6.04"x3.42"x6.49" / 153x87x165mm
$223.99

Anycubic Air Purifier for LCD 3D Printer Accessories, with Activated Carbon Filter, Powerful Fan, for LCD, SLA, MSLA, DLP Resin 3D Printers (Pack of 2)
$24.53

HIKUDIY 6PCS FEP Film Release Films for ELEGOO Mars 5/Mars 5 Ultra/Mars 4/Mars 4 Ultra Resin 3D Printer with 95% Light Transmittance, 210 x 150 x 0.15mm
$26.39

ANYCUBIC Replaceable High Density Activated Carbon Filter (Pack of 4) | for Anycubic Photon Mono M7 Series/Photon Mono 4 Ultra Mini 3D Printer Purifiers
$10.11























