1 / 7ANYCUBIC Photon P1 14K Resin 3D Printer
The ANYCUBIC Photon P1 is a resin 3D printer whose listing highlights a ball-screw Z axis, heated vat, automatic levelling checks and print monitoring. The title claims 14K resolution, but the supplied details do not specify the build volume or display resolution, so confirm those before choosing it for size- or detail-critical work.
At a glance
- The listing describes a heated vat intended to support resin flow, including with engineering resins up to 8000cps.
- A C7-grade ball screw and dual linear rails are claimed for Z-axis stability.
- Dynamic Release 3.0 is described as adjusting lift height and speed based on layer-separation forces.
- A pre-print bed-level self-check and four-corner force feedback are listed.
- Listed detections cover resin level, bottom-layer separation, residue and build-plate installation, alongside power-loss recovery.
Pros and cons
Pros
- The specified levelling checks and force feedback may help users fine-tune the platform before printing.
- The stated resin compatibility extends from standard resin to engineering resin up to 8000cps.
- Dynamic release adjustment and release film are intended to reduce layer-peeling force, particularly for larger cross-sections.
Technical specifications
2 specifications| Brand | ANYCUBIC |
|---|
| Material listed | Resin |
|---|
What to know before buying
- The listing says AI detection is disabled by default and enabling it triggers a video-recording warning. Its claims about smoother surfaces, reduced release force and higher success are manufacturer claims, not independently established results.
Listing details to confirm
Listing dimensions are inconsistent: one field gives 62D x 43W x 42H centimetres, while two others give 62 x 43 x 42 cm, 17.11 kg. The title claims 14K, but no display resolution or build volume is confirmed in the supplied details, so verify these specifications for your intended prints.
Who is it for?
A good fit for
- Resin-printing users who want listed automatic levelling checks and real-time force feedback.
- Makers considering standard or engineering resins, who should confirm that their specific resin is suitable.
Less suited to
- Buyers who need a confirmed build volume or verified display resolution to plan print dimensions or detail.
- Users seeking a filament-based printer rather than a resin machine.

Customer reviews on Amazon
- 5 stars
85% 85% - 4 stars
15% 15% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings are strongly positive, with most ratings in the five-star category, but the supplied evidence includes no written customer feedback. A small rating sample cannot explain print quality, reliability or ease of use, so weigh it alongside the listing's unverified performance claims and the missing confirmed build volume and display resolution.
Frequently asked questions
Is the Photon P1 a 14K printer?
The title claims 14K, but the supplied product details do not provide a display resolution. Confirm the resolution for the selected listing before buying if it is important to your work.
What resin does the listing say it supports?
It claims compatibility from standard resins up to engineering resins rated at 8000cps. Check the requirements for your specific resin.
What should I know about the printer's dimensions?
The listing provides conflicting dimension formats and also includes a weight with one version. Confirm the physical dimensions and weight with the selected listing before planning a workspace.
Does AI inspection record video?
The product information says AI detection is disabled by default and that enabling it triggers a video-recording warning.

Alternative options

Creality 3D Scanner CR-Scan Raptor Pro for 3D Printing,0.02mm High Accuracy | Blue Laser & NIR,60fps Scanning Speed,Scan Size from 5-4000mm,Versatile Scanning,Scan Black Objects without Spraying
$2,159.00

ELEGOO Saturn 4 Ultra 16K Resin 3D Printer | 10" 16K Mono LCD and Flip-up Lid, Smart Tank Heating at 30 °C, Large Printing Size of 8.33 × 4.66 × 8.66 Inches
$624.79

ANYCUBIC Wash and Cure Station, Larger Volume 2 in 1 Wash and Cure 3.0 Plus | for Photon Mono, M7 Series LCD SLA DLP 3D Printer Models with Gooseneck Light, Washing Size: 228 x 128 x 260mm
$199.99

ELEGOO Mars 5 Ultra 9K Resin 3D Printer, 150mm/h High Speed Printing, Smart Automatic Leveling, Intelligent Detection, WiFi-Transfer, Printing Size of 153.36 x 77.76 x 165 mm³
$408.49

ANYCUBIC Photon Mono M7 Pro Resin 3D Printer 14K, 170mm/h Fast Printing | 10.1" Mono LCD with COB LighTurbo 3.0, Dynamic Temperature Controlled Resin Vat, Large Print Size: 8.77"x4.96"x9.05"
$649.99

Anycubic Photon P1 Max 12K Resin 3D Printer, 18.3L Ultra-Large Build | Auto-Leveling 3.0, Heated Vat, Smart AI Detection, for Mass Production & Prototyping, 285.5×214×300mm
$1,125.52

ANYCUBIC Photon P1(with Dual-Color/-Material Printing Platform) 14K | Resin 3D Printer with Industrial Ball Screw, Smart Auto Leveling, Engineering Resin Compatible, Build Size 8.78x4.96x9.05in
$699.99

ANYCUBIC ABS-Like Resin Pro 2 3D Printer Resin (4kg-Black) | Toughness Upgrade, Low Odor 405nm UV-Curing Resin, High Precision and High-Success Rate Photopolymer Resin for LCD 3D Printer
$67.99

Anycubic 10.1inch Integrated Release Film 2pcs for Photon P1 Resin 3D Printer, 275 × 206.6 × 2.3 mm
$21.65

ANYCUBIC Water Washable 3D Printer Resin 2.0 (1000g, Gray) | 405nm High Precision 3D Resin, Low Shrinkage Photopolymer Resin for 4K/8K/12K Capable LCD DLP Resin 3D Printer
$23.75

Anycubic Air Purifier 2.0 with Vant, Supports Connecting Two Devices, for 3D Printer Photon Mono 4/4 Ultra/M7/M7 Pro/M7 Max, Saturn/Mars Series and Anycubic Kobra S1, Ventilation Exhaust Low Odors
$31.99

OVERTURE PLA Filament 1.75mm PLA 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Blue 1-Pack)
$19.19























