Loonie PerksDeals for Canada
BlogSearch
Product guide

Anycubic Air Purifier 2.0 for 3D Printers

Anycubic Air Purifier 2.0 is a ventilation unit for compatible 3D printers, with claimed support for connecting two devices and routing exhaust through a supplied 3-metre pipe. Its appeal is chamber exhaust rather than a general-purpose room purifier, so compatibility and an exhaust route matter before buying.

At a glance

  • The listing claims ventilation for Photon Mono M7, M7 Pro and M7 Max through their ventilation holes, and says adapters can enable use with other listed printer models.
  • One purifier is claimed to support two 3D printers through a print distribution port.
  • A 3-metre exhaust pipe is claimed for routing exhaust to an external opening or window.
  • The listing describes continuous operation while active and claims reduced odour and chamber VOC levels.
Price
$31.99Save 18%

Reference price: $38.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The claimed two-printer connection may suit a workspace with two compatible printers without adding another purifier.
  • The 3-metre pipe gives some flexibility for routing exhaust to an external opening.
  • The listing identifies odours and VOCs as filtration targets, relevant to resin and filament printing.

Cons

  • This is an exhaust-focused accessory for 3D printers, not a stated standalone room air purifier.

Technical specifications

7 specifications
Identity
BrandANYCUBIC
Dimensions and installation
Weight listed950 g
Exhaust pipe length3-meter-long
Operation and filtration
Noise level52 db
Contaminant filtration capabilityOdors, Volatile Organic Compounds (VOCs)
Appearance and pack
ColourWhite
Number of packs1

What to know before buying

Listing details to confirm

Compatibility is direct for the stated Photon Mono M7, M7 Pro and M7 Max ventilation holes, while Photon Mono 4, 4 Ultra, Kobra S1 and other printers are described as requiring printed adapters or a ventilation hole. The claimed reduction of VOC content to below 0 is unclear as written, and the two-device connection and supplied pipe should be confirmed for the selected listing.

Who is it for?

A good fit for

  • 3D printer owners who can route a 3-metre exhaust pipe to an external opening.
  • Workspaces seeking one listed ventilation unit for two supported printers.

Less suited to

  • Buyers seeking a general-purpose air purifier for a room.
  • Owners of printers without a suitable ventilation hole or a compatible adapter.
Anycubic Air Purifier 2.0 for 3D Printers · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 8 ratings
  • 5 stars84%84%
  • 4 stars16%16%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Only aggregate ratings are supplied, with a small sample and a mostly high rating distribution. That provides limited evidence of general satisfaction but does not identify what customers liked or disliked, or establish ventilation performance. For buyers, printer fit and a workable exhaust route are more directly relevant to the stated use.

Frequently asked questions

Can it connect to two 3D printers?

The listing claims that it supports simultaneous ventilation for two printers through a print distribution port. Confirm the required connection parts and compatibility for your printer setup.

Which printers are listed as compatible?

It claims direct connection to Photon Mono M7, M7 Pro and M7 Max ventilation holes. The Photon Mono 4, 4 Ultra and Kobra S1 are described as requiring printed adapters.

Is this a room air purifier?

The described use is to exhaust air from a 3D printer chamber to an external environment. The listing does not specify general room-air cleaning.

What is the listed noise level?

The specification lists 52 db. Treat this as a listing claim rather than an independently measured result.

Anycubic Air Purifier 2.0 for 3D Printers · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.3
xTool Air Purifier P5010215 for F1, F2, M1 Ultra and M2
xTool Air Purifier P5010215 for F1, F2, M1 Ultra and M2

C$419

C$259

-38%
-38%
Product details in Markdown