Loonie PerksDeals for Canada
BlogSearch
Product guide

TINMORRY PETG-GF Glass Fiber Filament, 1.75 mm, 1 kg, Frosted Black

Fiber: TINMORRY PETG-GF is a glass-fibre-reinforced 3D-printing filament listed in frosted black, with a 1.75 mm diameter and 1 kg weight. The listing describes it as a rigid, dimensionally stable PETG blend, but its recommended printing setup calls for a wear-resistant nozzle and calibration.

At a glance

  • Glass fibre reinforcement is claimed to reduce shrinkage and warping compared with regular PETG.
  • The listing describes increased rigidity and durability for structural or technical parts.
  • A frosted surface is claimed, and the selected colour is listed as frosted black.
  • The stated setup includes 260℃ nozzle temperature, 80℃ bed temperature, calibration and a wear-resistant nozzle.
Price
$26.73Save 12%

Reference price: $30.38

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • A 1 kg spool and 1.75 mm diameter suit buyers whose printer accepts that filament size.
  • The claimed rigidity and dimensional stability may suit functional prints where shape retention matters.
  • The frosted-black surface offers a matte-looking finish rather than a standard glossy appearance, according to the listing.

Cons

  • The reinforced filament requires a wear-resistant nozzle rather than an ordinary brass nozzle, adding a printer setup requirement.
  • The listing recommends a temperature tower test and flow calibration, so setup may take more work than a ready-calibrated material.

Technical specifications

11 specifications
Identity
BrandTINMORRY
Material and appearance
Material listedPolyethylene Terephthalate Glycol
ColourPetg-gf Frosted Black
Dimensions and installation
Diameter1.75 millimeters
Weight listed1 kg
Printing guidance
Recommended nozzle temperature260℃
Bed temperature80℃
Print speed<200 mm/s
Recommended nozzle0.6 mm is recommended
Nozzle alternative0.4mm Capable
Dimensional accuracy1.75 ±0.03mm

What to know before buying

  • The listing's temperature and speed guidance is 260℃ nozzle, 80℃ bed and <200 mm/s, with a temperature tower test and flow calibration advised. It recommends wear-resistant steel nozzles, with 0.6 mm preferred and 0.4mm stated as capable. Claims about improved stability, strength and heat or chemical resistance are manufacturer descriptions, not independently verified results.

Who is it for?

A good fit for

  • FDM printer owners with a wear-resistant nozzle who want to try reinforced PETG for rigid functional parts.
  • Buyers seeking a frosted-black finish and willing to tune temperature and flow for their printer.

Less suited to

  • Users limited to ordinary brass nozzles or looking for a filament that needs no calibration.
  • Anyone who needs verified performance figures for heat, chemical exposure or load-bearing use.
TINMORRY PETG-GF Glass Fiber Filament, 1.75 mm, 1 kg, Frosted Black · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 112 ratings
  • 5 stars88%88%
  • 4 stars9%9%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star3%3%

Customer feedback highlights positive impressions of print quality, finish, durability, adhesion and colour. Those reports are relevant if a frosted-looking surface and sturdy prints are priorities, while the listing's calibration and wear-resistant-nozzle guidance remains important for setup. The aggregate ratings are strongly positive overall, but include a small one-star share and do not establish why those ratings were given.

Positive themes

  • Customers describe the filament as printing well and producing attractive parts.
  • Feedback mentions the finish, perceived strength, adhesion and colour positively.

Frequently asked questions

What nozzle setup does the listing recommend?

It advises using a wear-resistant steel nozzle instead of ordinary brass, with 0.6 mm recommended and 0.4mm stated as capable.

What printing settings are provided?

The listing specifies 260℃ nozzle temperature, 80℃ bed temperature and <200 mm/s print speed. It also recommends temperature tower testing and flow calibration.

Is this filament listed as compatible with Bambu Lab printers?

The title and printing guidance claim compatibility with Bambu Lab FDM printers. Confirm that the selected printer accepts 1.75 mm filament and the required wear-resistant nozzle.

What is the listed colour and spool weight?

The colour is listed as Petg-gf Frosted Black and the weight as 1 kg.

TINMORRY PETG-GF Glass Fiber Filament, 1.75 mm, 1 kg, Frosted Black · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
AMOLEN Silk Dual-Color PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Dual-Color PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown