1 / 7Polymaker Matte PLA Lava Red 1.75 mm, 1 kg
Polymaker Matte PLA Lava Red is a 1.75 mm, 1 kg polylactic acid filament for 3D printing. Its matte finish is intended to soften the visibility of print layers, and the listing also describes support removal as easy. Customer feedback is generally favourable about print appearance, but reports on consistency and tangling are not uniformly positive.
At a glance
- Matte PLA finish is claimed to help conceal visible print layers.
- Designed for straightforward breakaway support removal, according to the listing.
- Manufacturer describes the PLA as less brittle than standard PLA.
- Listing says the spool is wound to reduce tangles and the filament is dried and vacuum sealed with desiccant.
Reference price: $32.99
Price checked: Nov 21, 2026
View offerBlack Friday weekExplore the selectionPros and cons
Pros
- Matte surface finish suits prints where a less glossy appearance is wanted.
- Easy support removal may simplify finishing on prints that require supports.
- The 1 kg quantity and 1.75 mm diameter are clearly specified.
Cons
- Some customer feedback reports inconsistent results, brittleness, prints falling apart and tangling.
Technical specifications
7 specifications| Brand | Polymaker |
|---|---|
| Model | 70826 |
| Dimensions listed | 10 x 30 x 20 cm; 1 kg |
|---|---|
| Weight listed | 1 kg |
| Material listed | Polylactic Acid |
|---|
| Diameter | 1.75 millimeters |
|---|---|
| Colour | Matte Pla - 1.75mm Matte Lava Red (Hex Code: #Ed2f2e) |
What to know before buying
Listing details to confirm
The manufacturer describes this as PolyTerra PLA and says the same formula is now offered as Panchroma Matte PLA. Confirm the current listing name and colour if matching an existing spool or project. Customer-reported issues vary, so results may differ by print and setup.
What’s in the box
Included- Polymaker PolyTerra PLA Lava Red, 1.75 mm, 1 kg
Who is it for?
A good fit for
- FDM 3D printer owners whose equipment accepts 1.75 mm PLA filament.
- Makers seeking a matte Lava Red finish and prints that may benefit from easy-to-remove supports.
Less suited to
- Buyers who need guaranteed consistent results or cannot tolerate potential tangling, based on reported customer concerns.
- Users whose printer requires a filament diameter other than 1.75 mm.

Customer reviews on Amazon
- 5 stars
77% 77% - 4 stars
11% 11% - 3 stars
4% 4% - 2 stars
2% 2% - 1 star
6% 6%
Customer feedback commonly praises print appearance and the matte finish, while other reports describe inconsistent results, brittleness, prints falling apart and tangling. Opinions also vary on bed adhesion and value. Those differences matter for a filament chosen for finish and support removal, particularly if dependable results are essential. The listing claims reduced tangling and a less brittle formulation, but those claims do not eliminate the reported variation.
Positive themes
- Customer feedback praises print quality and the matte finish.
Negative themes
- Some customer feedback reports inconsistency, brittleness, prints falling apart and tangling.
Mixed feedback
- Customer opinions vary on bed adhesion and value for money.
Frequently asked questions
What diameter is this filament?
The listing specifies a diameter of 1.75 millimeters. Check that your printer accepts this size before ordering.
What does the matte finish mean for prints?
The manufacturer says the matte surface helps conceal visible print layers, which may suit projects where a less glossy look is preferred.
Is this currently sold as PolyTerra or Panchroma?
The listing identifies the product as PolyTerra and says the same formula is now available as Panchroma Matte PLA. Check the selected listing if the name or colour must match another spool.

Alternative options

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Army Red | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$20.69

Polymaker PLA Filament 1.75mm Magenta 1KG Spool, Neatly Wound | Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers
$21.59

Polymaker HT-PLA Filament 1.75mm Red 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$21.99

Multi-Color PLA Filament for Bambu Lab & AMS – 1.75 mm (8-Pack, 1 kg Each) – Neatly Wound Refill – Tangle & Clog-Free ±0.05 mm – Fits Most Refill Spools
$119.99

Colourbing Pre-Dried Silk PLA+ 3D Printer Filament 1.75mm, Neatly Wound & Shiny Glossy Color, Smooth Printing PLA+ Filament Ideal for Christmas Decorations, Fit for Most FDM 3D Printer, 1KG Spool- Red
$23.99

Polymaker Panchroma Matte PLA Filament 1 .75 Refill 1kg, Savannah Yellow | Spoolless High Speed 3D Printing Filament 2.2lb, Compatible with Bambu Labs & FDM 3D Printers, Clog-Free for Reusable Spool
$12.99

Polymaker PETG Filament 1.75mm Red 1KG, High Speed, 2.2 Lbs | Up to 300mm/s, Easy to Print, High Strength, Excellent Layer Adhesion, Warp Free, 3D Printer Filament with Most 3D Printers
$21.11

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Charcoal Black | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

Polymaker PLA Pro 3D Printing Filament Black 1KG, High-Impact Tough PLA, Fast Printing up to 300mm/s, Easy to Print, No Enclosure Required, High Speed New Formula, Formerly Polysonic PLA Pro
$21.11

Polymaker HT-PLA Filament 1.75mm Blue 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$20.23

Kretrum 3D Pen Filament Refills 31 Colors 1.75mm PLA Compatible with SCRIB3D MYNT3D Keiare 3D Pen Most 1.75mm 3D Prining Pens NOT FIT 3Doodler Start+ Pen Each Color 5M, Toal 155M
$14.39

ELEGOO PLA+ Filament 1.75mm Black 4KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$51.84























