Loonie PerksDeals for Canada
BlogSearch
Product guide

Reboot RBC6000DLF 60A Dual-Voltage Plasma Cutter

The Reboot RBC6000DLF plasma cutter is a 60A, dual-voltage machine promoted for mesh cutting and non-touch pilot-arc starting. Its largest stated cutting figures apply at 240V, so buyers planning to use 120V should not assume the same capacity.

At a glance

  • Listing describes non-high-frequency, non-touch pilot-arc starting, with no workpiece contact needed to start.
  • The stated 1-inch maximum and 5/8-inch clean-cut claims apply at 240V, while the listing says 120V suits lighter tasks.
  • LED readout and 2T/4T modes are intended to make current adjustment and short- or longer-cut operation more straightforward.
Price
$245.47Save 22%

Reference price: $313.49

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • Dual-voltage operation offers a 120V option for lighter work and 240V for the listing's higher cutting claims.
  • Non-touch pilot-arc starting and mesh-cutting capability are useful features for varied metal-cutting jobs.
  • 2T/4T modes and a large LED display provide practical controls for different cut durations.

Technical specifications

15 specifications
Identity
BrandReboot
ModelRBC6000DLF
Rated size60A
Power
Power configurationac
Listed voltage120240 volts
Cutting and operation
Maximum cut claim at 240V1" (25mm) max cut
Clean cut claim at 240V5/8" (15.8mm) clean cut
Starting methodNon-High Frequency and Non-Touch Pilot Arc
Operating modes2T (short cuts) & 4T (long cuts)
DisplayLarge LED display
Dimensions and installation
Weight listed7.14 kg
Parcel dimensions44 x 27 x 25 cm; 7.14 kg
Other details
Recommended breaker at 120V50A+
Recommended breaker at 240V30A+
Warranty descriptionBacked by 1-year limited warranty against manufacturing defects for reliable after-sales support.

What to know before buying

  • Cut capacity is voltage-dependent, with the largest stated figures specified at 240V, not as an unconditional result at 120V. The listing recommends a 50A+ breaker at 120V and a 30A+ breaker at 240V, so confirm your circuit and intended operating setup before buying.

What’s in the box

Included
  • Plasma cutter

Who is it for?

A good fit for

  • DIY users and small workshops that want a dual-voltage plasma cutter for metal and mesh work.
  • Buyers planning heavier cuts on a suitable 240V circuit who want the listed 1-inch maximum and 5/8-inch clean-cut claims.
  • Users who prefer a non-touch pilot arc and selectable 2T/4T operation.

Less suited to

  • Buyers who need the listed maximum cutting claims on 120V, since those figures are stated for 240V use.
  • Anyone who cannot provide a circuit matching the listing's recommended breaker requirements.
Reboot RBC6000DLF 60A Dual-Voltage Plasma Cutter · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 66 ratings
  • 5 stars68%68%
  • 4 stars22%22%
  • 3 stars5%5%
  • 2 stars2%2%
  • 1 star3%3%

Customer feedback highlights perceived cutting performance, including reports of handling thicker pieces and strong results on 110V, alongside positive comments about quality and value. This is customer-reported experience, not confirmation of cut capacity. Compare those impressions with the listing's clearer condition that its largest stated cuts apply at 240V. Aggregate ratings are generally favourable, though a smaller share are lower ratings, and they do not establish specific reasons for dissatisfaction.

Positive themes

  • Customers report positive impressions of quality, value and cutting performance.
  • Customer summary mentions reports of cutting thicker pieces and being impressed with performance at 110V.

Frequently asked questions

Does the Reboot RBC6000DLF cut at its maximum on 120V?

The listing specifies its 1-inch maximum and 5/8-inch clean-cut claims at 240V. It describes 120V as suitable for lighter tasks, without giving equivalent 120V cut figures.

What circuit does the listing recommend?

It recommends a 50A+ breaker for 120V and a 30A+ breaker for 240V. Check that your installation meets the applicable requirement.

What starting and cut controls are listed?

The product is described as using non-high-frequency, non-touch pilot-arc starting, and it supports 2T for short cuts and 4T for long cuts.

What does the listing say comes in the box?

The included-components field names the plasma cutter only. It does not specify torch accessories or other items in that list.

Reboot RBC6000DLF 60A Dual-Voltage Plasma Cutter · photo 3
Additional product photo 3

Alternative options

Product details in Markdown