1 / 7Reboot RBC6000D 60A Dual-Voltage Plasma Cutter
Reboot RBC6000D is a 60A plasma cutter listed for dual-voltage use and metal cutting with a PT31 torch. Its claimed cutting capacity varies by input voltage, and it requires a suitable air compressor, so buyers should confirm their power and air supply before choosing it.
At a glance
- The listing describes automatic detection of 120V or 240V input, with different current ranges for each.
- Manufacturer cutting claims distinguish 1/2-inch clean cutting from a 5/8-inch maximum, with the larger thickness specified at 240V and 60A.
- A pre-installed pressure-reducing valve is claimed, while the stated compressor requirement is 90 PSI and 60 L/min or above.
- PT31 torch consumables are specified, and the included-components list names a torch and tips.
Often bought together
Pros and cons
Pros
- Dual-voltage operation is claimed, giving buyers a choice between compatible 120V and 240V supplies.
- The explicit contents list includes a PT31 torch, tips, earth ground clamp and English manual.
- The stated 6.46 kg weight and compact listed dimensions may suit moving the cutter between work areas.
Cons
- The air supply requirement means this is not a standalone tool, buyers need a compressor capable of the stated output.
- The claimed clean-cut thickness is lower than the claimed maximum cut thickness, and the listing ties the higher figure to 240V/60A.
Technical specifications
15 specifications| Brand | Reboot |
|---|---|
| Model | RBC6000D |
| Rated size | 60A |
| Power configuration | ac |
|---|---|
| Voltage listed in product details | 120240 volts |
| Voltage options claimed | 120V/240V |
| Current ranges claimed | 10-35A@120V / 30-60A@240V |
| Cutting capacity claimed | 1/2 inch clean cut, 5/8 inch max cut |
| Cut thickness by voltage claimed | 1/2" (12mm) steel at 120V/35A and 5/8" (16mm) at 240V/60A |
| Air compressor requirement | 90 PSI, 60 L/min or above |
|---|---|
| Pressure guidance | 70-75 PSI / 0.48-0.52MPa |
| Consumable model | PT31 |
| Dimensions listed | 29.79 x 11.1 x 22.5 cm; 6.46 kg |
|---|---|
| Weight listed | 6.46 kg |
| Breaker guidance | 50A for 120V, 30A for 240V |
|---|
What to know before buying
Listing details to confirm
Listing details are inconsistent: the dimensions entry includes a 6.46 kg weight while a separate entry repeats that weight, and voltage is also rendered as “120240 volts” in product details despite the 120V/240V claim. Cutting specifications also vary by voltage and operating point, and the page gives both 70-75 PSI guidance and a 90 PSI compressor requirement. Confirm the intended electrical setup, breaker, air-pressure instructions and capacity for the selected version before use.
What’s in the box
Included- RBC6000D plasma cutter
- PT31 torch
- Tips
- Earth ground clamp
- English manual
- 1-year limited warranty
Who is it for?
A good fit for
- DIY users or beginners looking for a plasma cutter for small cuts, metal art or home repairs, provided they have a suitable compressor and power supply.
- Automotive repair and light fabrication buyers who can work within the listed voltage-dependent cutting claims.
Less suited to
- Buyers without an air compressor meeting the stated flow and pressure requirements.
- Anyone who needs a verified cut thickness beyond the listing's mode-specific claims or a machine that operates without checking electrical and air-supply compatibility.

Customer reviews on Amazon
- 5 stars
64% 64% - 4 stars
11% 11% - 3 stars
8% 8% - 2 stars
6% 6% - 1 star
11% 11%
Customer feedback describes the cutter as practical for small cuts and approachable for beginners, with positive remarks about the accessories and air regulator. Experiences with cutting performance and ease of use are mixed. For buyers considering DIY work, that mixed feedback matters alongside the listing's voltage-dependent cut claims and compressor requirements, which set practical limits on setup and intended jobs.
Positive themes
- Customers report that the tool can be useful for small cuts and appreciate the included accessories and air regulator.
Mixed feedback
- Customer feedback is mixed on cutting performance and ease of use.
Frequently asked questions
What is the stated cutting capacity?
The listing claims a 1/2-inch clean cut and 5/8-inch maximum cut. It separately specifies 1/2-inch steel at 120V/35A and 5/8-inch at 240V/60A, so treat those figures as operating-point claims rather than one universal capacity.
What air compressor does the RBC6000D require?
The stated requirement is 90 PSI and 60 L/min or above. The page also gives 70-75 PSI pressure guidance, so confirm the correct operating-pressure instructions for the selected unit.
What comes in the listed package?
The contents list names the RBC6000D cutter, PT31 torch and tips, earth ground clamp, English manual and a 1-year warranty.
Which consumables are specified?
The listing specifies PT31 consumables. Confirm compatibility and replacement-part details before purchasing additional parts.

Alternative options

Reboot Plasma Cutter Non-High Frequency Non-Touch Pilot Arc, 120V/240V Dual Voltage, 1 Inch Max Cut 5/8 Inch Clean Cut, Mesh Cutting, 2T/4T, Large LED Display for Beginners DIY
$245.47

Reboot 130A Non-HF Plasma Cutter MIG Welder Combo 120V/240V | 7 in 1 Stick/Gas MIG/Flux Core/Lift TIG/Spot/Aluminum Welding 1/2 In Clean Cut 5/8 In Max Cut Multiprocess Welders
$239.99

Reboot 60A Plasma Cutter, Large LED Display, 120/240V Synergic IGBT Inverter Cutting Machine, 1/2 Inch Clean Cut, 5/8 Inch Max Cut, Post Flow and 2T/4T, Built-in Air Regulator, for Beginners DIY Use
$151.99

SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip Nozzles Consumables Kit 22pk
$22.83

Bestarc 50A Plasma Cutter Machine, Pilot Arc, IGBT 110V/220V Dual Voltage | 1/2" Clean, 2/3" Max Cut, Large Led Display, Mesh Cut, PA/PT, 2T/4T, Painted Metal, Air Sensor, For Home DIY
$177.64

150pcs PT-31 Air Plasma Cutting Nozzle Electrode Consumables Fit CUT-40 CUT-50D CT-312…
$37.99

KERUE SG-55 AG-60 WSD-60 .030" Plasma Cutter Cutting Torch Tip Nozzles Consumables Kit 50pk
$39.99

256028 Swirl Ring, Fit for Miller XT60 Plasma Cutter Torch Consumables
$43.80

KERUE SG-55 AG-60 WSD-60 .030" Plasma Cutter Cutting Torch Tip Nozzles Consumables Kit 24pk
$24.99

ARCCAPTAIN 110PCS PT31 Plasma Cutting Consumables Fit CUT-45 CUT-50 CT-312 with Plasma Cutter Torch PT-31 JG-40 LG-40
$37.99

ARCCAPTAIN TIG Welder AC/DC 200A with Pulse, 7in1 Aluminum Welder 110V/220V | Square and Triangular Wave, TIG/Stick/Spot Welding Machine, High Frequency, 2T/4T, Stainless Steel Fabrication, TIG200PACDC
$747.99

ARCCAPTAIN 60A Plasma Cutter Machine, Non-Touch Pilot Arc, 110V/220V | 3-in-1 Cut Modes, 15/16" Max Cut, Upgraded Large LED Screen, 2T/4T, PA/PT Adjustable, 1/4" NPT, 110V/220V, Air Pressure Alert
$376.19

