Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker PolyLite ABS Grey 1 kg, 1.75 mm (PE01003)

PE01003: Polymaker PolyLite ABS filament is a grey, 1 kg spool in 1.75 mm diameter, intended for FDM printing. Its listed heat resistance and toughness suit functional parts, but ABS printing calls for a heated bed and attention to warping.

At a glance

  • ABS is described as impact-resistant and suitable for durable functional parts.
  • The listing gives a suggested print temperature of 245-265˚C and speed of 30-50mm/s.
  • The product is described as low odour, though the listing warns that ABS has a stronger printing odour than PLA.
Price
$21.99Save 12%

Reference price: $24.99

Price checked: Nov 20, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • 1 kg spool and 1.75 mm diameter are clearly specified for planning filament use and printer fit.
  • Manufacturer claims include heat resistance and impact resistance, useful for functional prints needing those properties.
  • Customer feedback reports positive impressions of print quality, colour and adhesion.

Cons

  • ABS requires a heated bed and suitable print surface, and larger parts may be prone to warping.

Technical specifications

10 specifications
Identity
BrandPolymaker
ModelPE01003
Dimensions and installation
Dimensions listed17 x 27 x 10 cm; 1 kg
Weight listed1 kg
Filament diameter1.75 millimeters
Material and colour
Material listedAcrylonitrile Butadiene Styrene
Colour114 - 1.75mm Grey (Hex Code: #8c8d93)
Printing guidance
Print temperature245-265˚C
Print speed30-50mm/s
Vicat softening temperature104˚C

What to know before buying

  • The listing warns that ABS can have stronger odour than PLA and that large prints may warp. It suggests a raft or brim, slower first-layer speed, and passing filament through its fixed hole after use to help avoid tangles.

Who is it for?

A good fit for

  • FDM printer owners whose setup accepts 1.75 mm ABS and has a heated bed.
  • Makers printing durable functional parts where heat resistance and impact resistance are relevant.
  • Buyers seeking a grey ABS spool in a 1 kg quantity.

Less suited to

  • Printers without a heated bed or a suitable surface for ABS.
  • Buyers prioritizing PLA-like low odour or prints that avoid ABS warping considerations.
Polymaker PolyLite ABS Grey 1 kg, 1.75 mm (PE01003) · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 1,676 ratings
  • 5 stars75%75%
  • 4 stars13%13%
  • 3 stars2%2%
  • 2 stars4%4%
  • 1 star6%6%

Customer feedback is generally positive about print quality, colour, adhesion and reliability, while durability and warping receive mixed impressions. Those reports are relevant to buyers considering ABS for functional parts, but do not settle how a particular printer, surface or print size will perform. The listing itself cautions about warping and heated-bed requirements.

Positive themes

  • Customer feedback describes print quality, colour and adhesion favourably.

Mixed feedback

  • Customer opinions are mixed on durability and warping.

Frequently asked questions

What printer setup does this filament require?

The listing says 1.75 mm ABS requires a heated bed and a proper printing surface. Confirm your printer supports that diameter and ABS temperatures before buying.

What printing settings are listed?

The product details list a print temperature of 245-265˚C and print speed of 30-50mm/s. These are listing guidance, not a guarantee for every printer or part.

Is it suitable for large prints?

The listing warns that large parts can be prone to warping on domestic printers. It suggests considering a raft or brim, or reducing first-layer speed.

What is the filament's colour and amount?

The listing identifies it as grey, with a listed weight of 1 kg and a diameter of 1.75 millimeters.

Polymaker PolyLite ABS Grey 1 kg, 1.75 mm (PE01003) · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown