Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker Panchroma Translucent PLA Filament, 1.75 mm, 1 kg, Cyan

Polymaker Panchroma Translucent PLA Filament is a cyan 1.75 mm PLA spool intended for FFF/FDM printing. Its translucent finish is aimed at light-transmitting prints such as lampshades and lithophanes, while the listing also gives print settings and claims compatibility with most open-filament printers.

At a glance

  • Translucent cyan PLA for aesthetic prints where light transmission matters.
  • Listing describes a neatly wound, dried filament supplied vacuum-sealed with desiccant.
  • Manufacturer suggests default settings on most mainstream printers and high-speed printing.
Price
$21.99Save 12%

Reference price: $24.99

Price checked: Nov 20, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Translucency suits decorative projects such as lampshades and lithophanes.
  • A listed 1.75 mm diameter and broad temperature ranges give a starting point for printer setup.
  • Customer feedback describes smooth printing, appealing colour and strong adhesion.

Technical specifications

10 specifications
Identity
BrandPolymaker
ModelCA02001
Colour123 - 1.75mm Translucent Cyan (Hex Code: #08abfb)
Filament
MaterialPolylactic Acid
Diameter1.75 millimeters
Listed weight1 kg
Dimensions and installation
Dimensions listed20 x 20 x 6.5 cm; 1 kg
Printing settings
Nozzle temperature190˚C - 230˚C
Bed temperature25˚C - 60˚C
Print speedup to 200mm/s

What to know before buying

  • Translucency and perceived value receive mixed customer feedback, so results may not meet every buyer's expectations for clarity or cost. Route the filament through the spool's fixed hole after use to reduce tangles. The stated speed is a manufacturer claim, not a guaranteed result.

Who is it for?

A good fit for

  • Makers printing decorative cyan parts, lithophanes or light-diffusing designs.
  • Owners of compatible 1.75 mm FFF/FDM printers who want translucent PLA.

Less suited to

  • Buyers who need an assured transparent or crystal-clear finish, since customer impressions of transparency vary.
  • Printers that require a filament diameter other than 1.75 mm.
Polymaker Panchroma Translucent PLA Filament, 1.75 mm, 1 kg, Cyan · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 261 ratings
  • 5 stars82%82%
  • 4 stars8%8%
  • 3 stars4%4%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback highlights attractive colour, smooth printing, print appearance and adhesion. Transparency and value draw mixed reactions, which matters most for projects that depend on a particular light-through effect. The listing describes the filament as translucent, but that claim does not establish a uniform clarity in every print.

Positive themes

  • Customers describe the colour and print appearance favourably.
  • Feedback reports smooth printing and good adhesion.

Mixed feedback

  • Customers express varying opinions about transparency and value for money.

Frequently asked questions

What material and diameter is this filament?

The listing identifies it as Polylactic Acid (PLA) with a diameter of 1.75 millimeters.

What print settings does the listing give?

It lists a nozzle temperature of 190˚C - 230˚C, a bed temperature of 25˚C - 60˚C and speed up to 200mm/s. Treat these as manufacturer guidance and tune for your printer.

Is this filament fully transparent?

It is described as highly translucent, not as guaranteed clear. Customer feedback reports mixed experiences with transparency.

How should I avoid tangles after printing?

The listing advises passing the filament through the spool's fixed hole after use.

Polymaker Panchroma Translucent PLA Filament, 1.75 mm, 1 kg, Cyan · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown