1 / 7Polymaker Panchroma Translucent PLA Filament, 1.75 mm, 1 kg, Cyan
Polymaker Panchroma Translucent PLA Filament is a cyan 1.75 mm PLA spool intended for FFF/FDM printing. Its translucent finish is aimed at light-transmitting prints such as lampshades and lithophanes, while the listing also gives print settings and claims compatibility with most open-filament printers.
At a glance
- Translucent cyan PLA for aesthetic prints where light transmission matters.
- Listing describes a neatly wound, dried filament supplied vacuum-sealed with desiccant.
- Manufacturer suggests default settings on most mainstream printers and high-speed printing.
Reference price: $24.99
Price checked: Nov 20, 2026
View offerAhead of Black FridayExplore the selectionPros and cons
Pros
- Translucency suits decorative projects such as lampshades and lithophanes.
- A listed 1.75 mm diameter and broad temperature ranges give a starting point for printer setup.
- Customer feedback describes smooth printing, appealing colour and strong adhesion.
Technical specifications
10 specifications| Brand | Polymaker |
|---|---|
| Model | CA02001 |
| Colour | 123 - 1.75mm Translucent Cyan (Hex Code: #08abfb) |
| Material | Polylactic Acid |
|---|---|
| Diameter | 1.75 millimeters |
| Listed weight | 1 kg |
| Dimensions listed | 20 x 20 x 6.5 cm; 1 kg |
|---|
| Nozzle temperature | 190˚C - 230˚C |
|---|---|
| Bed temperature | 25˚C - 60˚C |
| Print speed | up to 200mm/s |
What to know before buying
- Translucency and perceived value receive mixed customer feedback, so results may not meet every buyer's expectations for clarity or cost. Route the filament through the spool's fixed hole after use to reduce tangles. The stated speed is a manufacturer claim, not a guaranteed result.
Who is it for?
A good fit for
- Makers printing decorative cyan parts, lithophanes or light-diffusing designs.
- Owners of compatible 1.75 mm FFF/FDM printers who want translucent PLA.
Less suited to
- Buyers who need an assured transparent or crystal-clear finish, since customer impressions of transparency vary.
- Printers that require a filament diameter other than 1.75 mm.

Customer reviews on Amazon
- 5 stars
82% 82% - 4 stars
8% 8% - 3 stars
4% 4% - 2 stars
2% 2% - 1 star
4% 4%
Customer feedback highlights attractive colour, smooth printing, print appearance and adhesion. Transparency and value draw mixed reactions, which matters most for projects that depend on a particular light-through effect. The listing describes the filament as translucent, but that claim does not establish a uniform clarity in every print.
Positive themes
- Customers describe the colour and print appearance favourably.
- Feedback reports smooth printing and good adhesion.
Mixed feedback
- Customers express varying opinions about transparency and value for money.
Frequently asked questions
What material and diameter is this filament?
The listing identifies it as Polylactic Acid (PLA) with a diameter of 1.75 millimeters.
What print settings does the listing give?
It lists a nozzle temperature of 190˚C - 230˚C, a bed temperature of 25˚C - 60˚C and speed up to 200mm/s. Treat these as manufacturer guidance and tune for your printer.
Is this filament fully transparent?
It is described as highly translucent, not as guaranteed clear. Customer feedback reports mixed experiences with transparency.
How should I avoid tangles after printing?
The listing advises passing the filament through the spool's fixed hole after use.

Alternative options

Polymaker Panchroma Matte PLA Filament 1 .75 Refill 1kg, Savannah Yellow | Spoolless High Speed 3D Printing Filament 2.2lb, Compatible with Bambu Labs & FDM 3D Printers, Clog-Free for Reusable Spool
$12.99

Polymaker Panchroma Luminous PLA Filament 1.75mm for 3D Printing, Green | Neatly Wound, Glow in the Dark PLA 1kg, Easy Print & Smooth Feeding, Compatible with Bambu Lab & Most 3D Printers
$24.63

ELEGOO PLA Translucent Filament Light Purple 1KG | Transparent 3D Printer Filament with Dimensional Accuracy, 1kg Cardboard Spool(2.2lbs) Fits for Most FDM 3D Printers
$22.09

Polymaker Panchroma PLA Filament 1kg, Gradient 3D Printing Filament 1.75mm | Celestial Blue-Purple, Neatly Wound PLA for Easy Print & Smooth Feeding. Compatible with Bambu Lab & Most 3D Printers
$29.91

ELEGOO PETG 3D Printer Filament 1.75mm Translucent Blue 1KG | Glossy Blue Finish, Transparent, High Precision, Strong & Durable, 1kg Spool, Fits for Most FDM 3D Printers
$21.59

Polymaker PLA Filament 1.75mm Magenta 1KG Spool, Neatly Wound | Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers
$21.59

AMOLEN Silk PLA Dual Color 3D Printer Filament, Red Black 1.75mm 1KG Spool | Coextrusion Bi-Color PLA Filament, Shiny Silk Finish, 1.75mm 3D Printer Filament, Ideal For Makers & Model Printing
$34.31

Fast Super Glue 120g Medium-Thin Instant Cyanoacrylate CA Glue All Purpose | Strong Instant Adhesive, for 3D Print PLA Model Craft, Plastic Wood Shoe Rubber, with Anti-Clog Caps & Precision Microtips
$16.62

Polymaker Panchroma Silk PLA Filament 1.75mm for 3D Printing, 1kg, Lime | Neatly Wound, High-Gloss Finish PLA, Easy Print & Smooth Feeding, Compatible with Bambu Lab & Most 3D Printers
$23.75

Polymaker PLA Pro Filament 1.75mm 1KG Metallic Silver | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$27.99

Polymaker HT-PLA-GF Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$26.59

2025 Skouphy Official Filament Dry Box 2.0 for 3D Printer Filament, Upgrade Temperature Adjustable and 24 Hours Timer Function Filament Storage Dehydrator for PLA PETG
$79.99























