1 / 5Leadgee Universal Dual Exhaust Tip, 3-Inch Inlet and Outlet
The Leadgee Universal dual exhaust tip is listed with a 3-inch inlet and outlet and a 9.5-inch overall length. Its double-wall, polished stainless-steel design is intended for a compatible 3-inch tailpipe, but the listing disagrees on installation method, so confirm fit and mounting before buying.
At a glance
- The listing specifies a 3-inch inlet, 3-inch outlet and 9.5-inch length.
- Double-wall construction with a slant-angle cut and rolled edge is claimed.
- The manufacturer describes mirror-polished T304 stainless steel.
- The listing recommends professional installation and says instructions are not included.
Often bought together
Pros and cons
Pros
- The stated matching 3-inch inlet and outlet make it straightforward to compare with a tailpipe of that diameter.
- The polished finish and double-wall styling provide a defined appearance without requiring a separate finish choice.
Technical specifications
9 specifications| Brand | Leadgee |
|---|---|
| Model | Universal |
| Inlet diameter | 3 inch |
|---|---|
| Overall length | 9.5 inch |
| Construction and finish | Double Wall Slant Angle Cut - Rolled Edge |
| Material | High Quality Mirror Polished T304 Stainless steel |
| Form factor | Round |
| Installation type | Bolt-On |
| Weight listed | 454 g |
|---|
What to know before buying
Listing details to confirm
Installation details are contradictory: product details say Bolt-On, while the design description says Weld On. The dimensions also differ between 24.1L x 15.7W centimetres and 24.13 x 15.72 x 0.1 cm, 453.59 g. Confirm mounting and dimensions against the selected listing before purchase. The manufacturer says no instructions are included and recommends professional installation.
Who is it for?
A good fit for
- Buyers whose existing exhaust pipe measures 3 inches and who want a polished, double-wall slant-cut tip.
- Buyers comfortable arranging professional installation after confirming whether the selected version bolts on or welds on.
Less suited to
- Buyers who need a confirmed clamp-on or weld-on method before ordering.
- Vehicles with an exhaust pipe diameter other than the listed 3-inch inlet, unless fitment is otherwise confirmed.

Customer reviews on Amazon
- 5 stars
84% 84% - 4 stars
16% 16% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Only aggregate rating information is supplied, with a strongly positive distribution in a modest sample. That offers a limited signal about buyer satisfaction, but without written feedback it cannot show what customers liked or whether the tip fit particular vehicles. Confirm the 3-inch inlet and the conflicting mounting description for your installation.
Frequently asked questions
What pipe size does this exhaust tip fit?
The listing gives a 3-inch inlet. Compare that with the outside diameter of the vehicle's tailpipe and confirm compatibility before ordering.
Is it bolt-on or weld-on?
The product details say Bolt-On, but the design description says Weld On. The listing does not establish one mounting method clearly, so confirm the selected version before purchase.
Are installation instructions included?
The listing says no instructions are included and recommends professional installation.

Alternative options

Motoforti 125°Turn Down Exhaust Tip 2" Inlet 2" Outlet 16" Length | Professional Exhaust Tip, Silver Tone, T201 Stainless Steel, Mandrel Bend Elbow Tube
$37.49

NETAMI 3" Inlet to 3.5" Dual Outlet Stainless Steel Exhaust Tip Angle Cut Chrome Polish
$112.76

Hihaha Double Wall Slant Exhaust Tip 2.5" Inlet 4.1" Outlet Silver Tone | Clamp Rear Tailpipe, Car Clamp on, 7.1" Length, 1 Set
$40.28

Hihaha Car Roll Edge Slant Exhaust Tip 2.5" Inlet 4.1" Outlet Silver Tone | Clamp Rear Tailpipe, Car Clamp on,7.1" Length, 1 Set
$40.49

FGJQEFG T409 Stainless Steel Y Pipe 3'' Inch ID Single to 3'' Inch ID Dual Stamped Exhaust Adapter Connector, Overall Length: Approx. 10", Universal
$42.99

NETAMI 3" to 4" Triple Qutlet Exhaust Tip Dual Wall Stainlesss Steel with Blue Burnt Tip 3"x4"x12"
$285.77

Hihaha Slant Exhaust Tip 2.5" Inlet 4.1" Outlet Stainless Steel Silver | Clamp Rear Tailpipe,Car Clamp on, Silver Tone, 7.3" Length, 1 Set
$55.49

Upower 2.5" to 3" Dual Exhaust Tip 2 1/2 Inch Inlet 3 Inch Outlet 9.5 | Stainless Steel 2 1/2 Inch Inlet 3 Inch Outlet 9.5" Length Weld On Exhaust Tailpipe 1.2mm Thickness Slant Rolled Edge
$63.43

MGSTORM 3" Inlet 4" Outlet 16" Long Dual Slant Angle Stainless Steel Exhaust Tip - Weld On Universal Fit for Car and Truck
$149.99

Pack of 2 Dual Exhaust Tips, 2.5 Inch Inlet, 3.5 Inch Outlet, 9.5 Inch Length, Polished Stainless Steel Diesel Exhaust Tip for Car & Truck (Double Wall Weld-On Design)
$130.21
























