1 / 6DNA MOTORING ZTL-PP-30-0-SS 18-Inch Stainless Steel Exhaust Pipe, 3-Inch OD
DNA MOTORING ZTL-PP-30-0-SS is a short, straight stainless steel exhaust pipe for DIY exhaust fabrication. Its 3-inch outside diameter and flared slip-fit end are intended to join with compatible tubing, but the listing recommends measuring for fit and professional installation.
At a glance
- One straight 18-inch section, with 3-inch outside diameter and an expanded opening at one end.
- The 18-gauge pipe is listed as stainless steel with a polished finish.
- Slip-fit joining is described for fabrication with a compatible pipe, clamp or weld.
Pros and cons
Pros
- A single short section may suit a localized custom exhaust repair or fabrication step.
- The expanded end gives a stated 3.15-inch inside diameter for joining compatible pipe.
Technical specifications
9 specifications| Brand | DNA MOTORING |
|---|---|
| Model | ZTL-PP-30-0-SS |
| Length and outside diameter | 18" Straight Pipe; 18-Gauge Piping Walls; 3" OD Piping with One Flared Opening of 3.15" ID |
|---|---|
| Form factor | Round |
| Installation type | Slip-Fit |
| Material listed | Stainless Steel |
|---|---|
| Finish | Polished |
| Colour | Metallic |
| Number of items | 1 |
|---|
What to know before buying
Listing details to confirm
The listing dimensions conflict: one entry gives 45.7L x 7.6W centimetres, while another gives 45.72 x 7.62 x 0.1 cm, 1.18 kg. Confirm the pipe dimensions and weight before relying on those detail fields. Measure the vehicle and adjoining pipe before purchase, and note that professional installation is highly recommended.
Who is it for?
A good fit for
- DIY exhaust builders needing one 18-inch straight section for a measured 3-inch OD setup.
- Buyers fabricating a custom system who can adapt or join a slip-fit pipe.
Less suited to
- Buyers seeking a complete exhaust system or a vehicle-specific direct-fit replacement.
- Anyone needing a different pipe diameter, bend, or length without further fabrication.

Customer reviews on Amazon
- 5 stars
79% 79% - 4 stars
8% 8% - 3 stars
3% 3% - 2 stars
3% 3% - 1 star
7% 7%
Customer feedback describes the pipe as working well, including for airboat applications, and mentions its appearance and perceived value. The listing specifies stainless steel with a polished finish, while reported comments describe a brushed look, so appearance expectations may vary. Ratings are largely in the top category but include lower ratings as well. These impressions do not establish vehicle compatibility, which still depends on matching the pipe and joint dimensions.
Positive themes
- Customer feedback describes the tubing as good quality and reports satisfactory performance, including in airboat applications.
- Feedback also praises its appearance and perceived value.
Frequently asked questions
What is included?
The listing states that the pipe comes as one 18-inch straight section. It does not identify clamps or other accessories as included.
What are the pipe dimensions?
The feature listing specifies an 18-inch length, 3-inch outside diameter, 18-gauge wall and a flared opening with 3.15-inch inside diameter. The separate product-dimension entries disagree, so check those measurements before ordering.
Will this fit my vehicle?
The listing calls it universal fitment but asks buyers to measure for proper fit. Confirm the required diameter and connection with the existing exhaust, and consider professional installation.
Can the joint be clamped or welded?
The listing describes the expanded end as suitable for joining with another pipe using an exhaust clamp or for welding. It is a fabrication component, not a complete system.

Alternative options

3 inches T304 Stainless Steel Exhaust Pipe Universal DIY Custom Exhaust Mandrel Bend Exhaust Tubing Straight & U-Bend, 8PCS
$175.99

3 inch T304 Stainless Steel Exhaust Pipe Kit, DIY Custom Exhaust Tubing Pipe Straight U-Bend 45 & 90 Degree Mandrel Bend, Universal Fit, 8PCS
$175.99

Walker 41532 Aluminized Pipe Elbow | Direct-fit OE-grade replacement.
$96.23

Richeer 3 inch O.D. Stainless Steel DIY Custom Exhaust Tubing Mandrel Exhaust Pipe Straight Pipe, 47.3 Inch Length, Polished Surface, Universal Fit, 2 PCS
$99.99

Motoforti 3" ID Straight Exhaust Pipe Tube 12" Length T304 Stainless Steel | DIY Custom Car Modified Tubing Piping, Expand-on Ends, Polishing
$33.99

Partuto Straight 4" OD 35" Length DIY Custom Mandrel Exhaust Pipe 4 Inch | Tube Pipe, T304 Stainless Steel, Universal Fit, Replacement
$62.19

Richeer 3 inch O.D. T304 Stainless Steel DIY Custom Exhaust Tubing Mandrel Exhaust Pipe Straight Pipe, 47.3 Inch Length, Polished Surface, Universal Fit, 1 PC
$72.99

FGJQEFG 2.25 Inch Straight DIY Custom Mandrel Exhaust Pipe Tube Pipe, 40 Inch Length, 2.25'' OD Mandrel Straight Pipe, T304 Stainless Steel, Universal Fitment - 1PC
$53.82

EVIL ENERGY Exhaust Adapter Reducer OD 2.5 Inch to ID 3 Inch, Pipe Connector 304 Stainless Steel Exhaust Coupler 2 1/2" OD to 3" ID
$23.99

Stainless Steel 316 Straight Thru Hull Exhaust Skin, Fitting 24mm Tube Pipe Socket Hardware, for Diesel Parking heaters
$20.24

Universal 2.5" ID to 3" ID Exhaust Pipe Adapter Connector Reducer 304 Stainless Steel 2.5 Inch to 3.0 Inch 2 1/2” ID to 3.0” ID kit
$20.99

X AUTOHAUX Straight 3" OD 30" Length Mandrel Exhaust Pipe | 304 Stainless Steel, 3 Inch Tube, Universal Fit, DIY Custom
$58.79























