Loonie PerksDeals for Canada
BlogSearch
Product guide

Flex-Hone GBD41232 4.5-Inch, 320-Grit Silicon Carbide Hone

Flex-Hone GBD41232 is a 4.5-inch, 320-grit silicon carbide honing tool listed for deburring and finishing. Its stated bore range is 4.251–4.500 inches, so matching the bore size matters before ordering.

At a glance

  • Manufacturer says the oversized construction is intended to help the tool centre and align itself while compensating for wear.
  • The listing describes a 320-grit silicon carbide abrasive for mild steel, stainless steel, cast iron and softer ferrous materials.
  • The manufacturer gives a typical finish range of 18 - 30 Microinch (.5 - .7 Micrometer).
  • Listed for use in a hand drill, drill press or CNC equipment.
Price
$181.27Save 12%

Reference price: $205.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • The specified 4.251–4.500-inch bore range makes it easier to match the hone to a particular cylinder size.
  • The listing identifies both finishing and cross-hole deburring uses, which may suit a shop operation combining these tasks.

Technical specifications

14 specifications
Identity
BrandFlex-Hone
ModelGBD41232
Tool diameter4.5 inches
Grit320 Grit
Dimensions and installation
Dimensions listed34.3 x 11.4 x 0.1 centimetres
Weight listed708 g
Abrasive part length6"
Shank diameter0.310"
Overall length13.5"
Bore diameter range4.251"-4.500"
Materials and use
Abrasive materialSilicon Carbide
Bristle constructionAbrasive Globule Bonded To Flexible Nylon Filament
Recommended usesDeburring, Finishing
Stated compatible materialsMild Steel

What to know before buying

Listing details to confirm

The specifications state a 4.5-inch tool diameter, while the manufacturer's bore-size instruction specifies use from 4.251"-4.500". Confirm your actual bore falls within that range and order by bore size. The listed dimensions and weight also appear in alternate precision forms elsewhere on the page, so treat the table values as listing details rather than reconciled measurements.

What’s in the box

Included
  • FLEX-HONE tool

Who is it for?

A good fit for

  • Cylinder finishing and cross-hole deburring on compatible bore sizes.
  • Users working with mild steel, stainless steel, cast iron or other softer ferrous materials who need a 320-grit hone.

Less suited to

  • Buyers whose bore is outside the stated 4.251–4.500-inch range.
  • Users seeking an abrasive specified for non-ferrous materials.
Flex-Hone GBD41232 4.5-Inch, 320-Grit Silicon Carbide Hone · photo 2
Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 8 ratings
  • 5 stars83%83%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star17%17%

The available aggregate ratings lean positive, with most shown ratings in the top category, but a smaller portion are at the lowest category. With no review text available, those figures cannot explain the differing experiences or establish how well the hone performs for a particular bore or material.

Frequently asked questions

What bore sizes is this hone listed for?

The listing states a bore range of 4.251"-4.500" and advises ordering by bore size.

What materials is it listed for?

The product title and feature details name mild steel, stainless steel, cast iron and softer ferrous materials.

Can it be used for deburring as well as finishing?

Yes. Deburring and finishing are listed uses, and the manufacturer describes cross-hole deburring.

What drive equipment is specified?

The manufacturer says it can be used in a hand drill, drill press or CNC equipment.

Flex-Hone GBD41232 4.5-Inch, 320-Grit Silicon Carbide Hone · photo 3
Additional product photo 3

Alternative options

Product details in Markdown