1 / 7Flex-Hone BC21232 Cylinder Hone, 2-1/2 in, 320 Grit
Flex-Hone BC21232 is a 2-1/2-inch cylinder hone listed with 320-grit silicon carbide abrasive. Its flexible abrasive filaments are intended for bore finishing and cross-hole deburring, with use by hand or in CNC equipment.
At a glance
- Described for surface finishing and cross-hole deburring.
- The listing claims a self-centering, self-aligning design that compensates for wear.
- Listed for hand use or CNC equipment.
Often bought together
Pros and cons
Pros
- Combines a 2-1/2-inch diameter with 320-grit silicon carbide abrasive for buyers matching those specifications to a bore-finishing job.
- Flexible nylon filaments with abrasive globules are intended to reach bore surfaces and support cross-hole deburring.
Technical specifications
12 specifications| Brand | Flex-Hone |
|---|---|
| Model | BC21232 |
| Dimensions listed | 20.3 x 10.9 x 7.4 centimetres |
|---|---|
| Diameter | 2.5 inches |
| Material listed | Silicon Carbide |
|---|---|
| Grit number | 320 |
| Grit type | Extra Fine |
| Bristle construction | flexible nylon filament with abrasive globules |
| Colour | Gray |
| Recommended uses | Deburring, Finishing, Polishing |
|---|---|
| Compatible materials listed | Aluminum,Automotive,Metal |
| Number of pieces | 1 |
What to know before buying
- Match the listed 2.5-inch diameter and 320 grit to the bore and required finish before ordering. Manufacturer claims about self-alignment and wear compensation are not independent performance verification.
Who is it for?
A good fit for
- Machinists or hobbyists finishing a compatible 2-1/2-inch bore with 320-grit abrasive.
- Buyers seeking a flexible hone for deburring or finishing who plan to use it by hand or in CNC equipment.
Less suited to
- Buyers who need a different diameter, grit, or abrasive material.

Customer reviews on Amazon
- 5 stars
73% 73% - 4 stars
18% 18% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
9% 9%
Aggregate ratings lean positive, with most ratings in the five-star category, but a smaller one-star share indicates that experiences are not uniformly favourable. With no written feedback supplied, the reasons for either response are unknown. The rating figures do not establish how this 2-1/2-inch, 320-grit hone performs for a particular bore or finishing task.
Frequently asked questions
What size and grit is this hone?
The listing identifies model BC21232 as 2.5 inches in diameter with 320-grit silicon carbide abrasive.
What work is it intended for?
The listed uses include deburring, finishing and polishing. The manufacturer also describes it for bore surface finishing and cross-hole deburring.
Can it be used in CNC equipment?
The listing says it can be used by hand or in CNC equipment. It does not specify a particular machine setup.

Alternative options

Brush Research Flex-Hone Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-1/2" (64 mm) Diameter, 240 Grit Size
$65.99

Brush Research Flex-Hone Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-1/8" (54 mm) Diameter, 320 Grit Size
$59.16

Brush Research Flex-Hone Cylinder Hone, BC Series, Silicon Carbide Abrasive, 1" (25.4 mm) Diameter, 320 Grit Size
$45.20

Sporacingrts Manual Piston Ring Filer with 120 Grit Grinding Wheel | Manual piston ring filer includes a 120 grit carbide grinding wheel for accurate piston ring end gap adjustment.
$31.50

MOTO4U Piston Pin Puller, Plungers Remover Tool Heavy Duty Wrist Pin Puller-Full Skirt Piston Tool with 5 Adapters Piston Bolts (11mm, 13mm, 16mm, 19mm, 22mm) for Small Engine Repairs in Sliver
$48.99

Acymner Engine Cylinder Hone Tool, 2" to 7" Diameter Cylinder Hone | Cylinder Honing Tool For Hole Grinding & Brake Piston Service, Adjustable Deglazer with Extra 3PCS Long Stones 220 Grit (3")
$22.49

Garhgi 3.780 Inch Cylinder Hone Tool 240 Grit Flexible Ball for 95mm(3.75") | 96mm Ball-Style Engine Hone Crosshatch Rebuild, for 5.3L 4.8L Automotive Hydraulic Brake Rotor Deburring Piston Ring Seat
$70.05

3 Arm Replacement Stones for Engine Cylinder Hone 180 Grit, Easily Inserted and Disassembled Suitable for Various Engines
$10.80

Jelquix Ball Style Cylinder Hone Tool for Engine Brake Bores, 77mm | 240 Grit Silicon Carbide, Self Centering Flexible Honing Brush for Caliper Hydraulic Pipe Finishing
$26.81

STARESSO D6 PLUS Manual Coffee Grinder | Stainless Steel, Conical Burr
$113.21

GOWENIC 4in 240 Grit Ball Style Engine Cylinder Hone | Flexible Carbide Engine Ball Hone with Silicon Carbide Abrasive for Crosshatch Surface Finish
$53.76

OMT Valve Spring Compressor Removal Tool, 10pc C Clamp | Heavy Duty Non-Bending Metal Build; Includes 5 Collet Pusher Adapters for Motorcycles and Cars
$31.99
