1 / 7Flex-Hone BC7818 Cylinder Hone, 22 mm, 180 Grit
Flex-Hone BC Series BC7818 is a flexible silicon carbide cylinder hone listed at 180 grit and a nominal 7/8-inch diameter. Its self-aligning construction is intended for surface finishing and cross-hole deburring, with use by hand or in CNC equipment.
At a glance
- Flexible abrasive tool is described for finishing cylinder surfaces and deburring cross holes.
- Manufacturer claims a self-centering, self-aligning design that compensates for wear.
- Can be used by hand or in CNC equipment, according to the listing.
Often bought together
Pros and cons
Pros
- The flexible construction and self-aligning design are intended to simplify alignment during bore finishing.
- Listed for both surface finishing and cross-hole deburring, which may suit machining tasks requiring both operations.
Technical specifications
15 specifications| Brand | Flex-Hone |
|---|---|
| Model | BC7818 |
| Abrasive material | Silicon Carbide |
| Grit number | 180 |
| Grit type | Very Fine |
| Nominal diameter in title | 7/8" (22 mm) |
| Diameter listed in details | 22.23 millimeters |
|---|---|
| Dimensions listed | 20.3 x 2.5 x 20.3 centimetres |
| Weight listed | 454 g |
| Material listed | Aluminum |
|---|---|
| Compatible material | Aluminum,Automotive,Metal |
| Recommended uses | Finishing, Polishing |
| Bristle type | Flexible with abrasive blood cells |
| Number of pieces | 1 |
|---|---|
| Use options | Use by hand or in CNC equipment |
What to know before buying
Listing details to confirm
The listing gives a 7/8-inch (22 mm) diameter in the title but 22.23 millimeters in details, and lists Aluminum as the material while also naming automotive and metal as compatible materials. The bristle description, “Flexible with abrasive blood cells,” is unusual and unconfirmed, so verify the intended specification and fit before purchase.
Who is it for?
A good fit for
- Machinists or repairers finishing appropriately sized bores or deburring cross holes.
- Users who need a flexible hone for hand operation or CNC equipment.
Less suited to
- Buyers who need a clearly specified abrasive for a material other than the listed silicon carbide option.
- Tasks that require a confirmed diameter other than the listing's stated sizes.

Customer reviews on Amazon
- 5 stars
92% 92% - 4 stars
5% 5% - 3 stars
3% 3% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings are strongly concentrated in the five-star category, with a small remainder at four and three stars. This is a positive overall signal but does not identify specific customer experiences or explain the lower ratings. Buyers should base fit and process decisions on the listed abrasive and diameter details, which are not fully consistent across the page.
Frequently asked questions
What grit is the Flex-Hone BC7818?
The listing specifies 180 grit and classifies it as Very Fine.
What diameter should I use when checking fit?
The title gives 7/8" (22 mm), while the details list 22.23 millimeters. Confirm the required bore size against the selected listing before buying.
Can it be used in CNC equipment?
The listing says it can be used by hand or in CNC equipment.
What work is this hone intended for?
The supplied features describe surface finishing and cross-hole deburring, and the recommended uses include finishing and polishing.

Alternative options

RULLINE 80514 Manual Piston Ring Filer 140/170 Grit | Manual piston ring filer with 140/170 grit abrasive wheel for accurate piston ring end gap adjustment.
$30.39

DUZFOREI 8Pcs Bore Brush, Stainless Steel Wire Brush for Drill 1/4 Hex Shank Twisted Wire Cleaning Tools, for Home Cleaning Outdoor Activities Automotive Repair and Maintenance
$18.99

DAYUAN Professional Petrol Engine Compression Tester Kit Set, Red Case | 8 Pcs, 14mm & 18mm Adapters, Dual Scale Gauge, 0-300 PSI/0-20 Bar, Reinforced Rubber Hose, Universal for Cars Motorcycles
$23.72

CDBP TNMG432 Carbide Inserts for Steel, CVD Coated Turning Tool, 10PCS | TNMG220408, PM Chipbreaker, Semi-finishing, for CNC Lathe, Smooth Turning
$77.89

Sporacingrts Manual Piston Ring Filer with 120 Grit Grinding Wheel | Manual piston ring filer includes a 120 grit carbide grinding wheel for accurate piston ring end gap adjustment.
$31.50

MOTO4U Piston Pin Puller, Plungers Remover Tool Heavy Duty Wrist Pin Puller-Full Skirt Piston Tool with 5 Adapters Piston Bolts (11mm, 13mm, 16mm, 19mm, 22mm) for Small Engine Repairs in Sliver
$48.99

Aluminum Connecting Rod Vise For Removal Installation Of Rod Bolts Replace 66769
$86.99

CDBP CNC Carbide Inserts CCMT32.51 / CCMT09T304-MD for Metal Cutting Steel, Semi-Finishing chipbreaker for Turning Cutter, 10 PCS
$50.39

MR.SIGA 5 Pack Bottle Brush Cleaning Set with Storage Holder, White | Water bottle brush with stand, cleaning brushes for long narrow neck bottles, water bottles, baby bottles, drinking glass
$29.99

LU&MN End Mills, Carbide Square Mill Bits Sets for Milling Alloy Steels, Hardened Steel, Metal & More, Ideal for DIYers and Professionals, 4T, 4 Flute (5, 1/8 in)
$34.99

Powerbuilt 648441 Plastic Gauge
$13.35

Permatex 81950 Engine Assembly Lubricant, 118mL Bottle
$15.96
