Loonie PerksDeals for Canada
BlogSearch
Product guide

LU&MN 1/8-Inch 4-Flute Carbide Square End Mills, 5-Pack

Pack: LU&MN square end mills are a five-piece set of 1/8-inch carbide cutters with four flutes, intended for machining metals including steel and copper alloys. The small cutting diameter and stated 1/8-inch shank make collet fit a key compatibility check, while the listing gives differing hardness guidance and coating names that should be clarified before purchase.

At a glance

  • Four-flute square-end geometry for milling, with non-center-cutting design.
  • Listing describes use with steel grades, stainless steel, copper and copper alloys, with differing hardness limits across its descriptions.
  • The listing says the 1/8-inch shank can fit many desktop and industrial CNC machines when matched to a compatible collet.
Price
$34.99Save 15%

Reference price: $40.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Five cutters are listed in the set, useful for keeping replacements on hand.
  • Carbide construction and four cutting edges are specified.
  • The stated material range includes several steel types and copper alloys.

Cons

  • Non-center-cutting design is a limitation for operations that require a center-cutting tool.

Technical specifications

18 specifications
Identity
BrandLU&MN
Dimensions and installation
Listed dimensions3.8 x 0.32 x 0.32 cm; 40.82 g
Listed item weight41 g
Cutting length0.38 inches
Cutting diameter3.18 millimeters
Size name1/8 in
Cutting length, feature description3/8 inch
Shank size, feature description1/8 inch
Overall length, feature description1-1/2 inches
Cutting design
Number of flutes4
End cut typeSquare End
Cut typeNon-Center Cutting
Item shapeSquare
Tolerance heldPrecision
Materials and finish
MaterialCarbide
Finish typeAlTiBN
Set details
Number of items5
Manufacturer part numberLME1/8"4T-5

What to know before buying

Listing details to confirm

Listing details are inconsistent or unconfirmed: the cutting length appears as both 0.38 inches and 3/8 inch, despite being equivalent-looking entries, the cutting diameter is given as 3.18 millimeters and 1/8 inch, and the finish is named AlTiBN in details but TiAlN and AlTiN elsewhere. Material suitability is stated as HRC less than 50 in one section and under HRC 55 in another. Confirm the intended coating, dimensions and hardness range for your job before ordering. The feature copy also specifies a 1/8-inch shank, which is not independently shown in the dimensional listing.

Who is it for?

A good fit for

  • CNC users seeking a five-piece set of small-diameter square end mills for metal machining.
  • Machinists whose work is within the stated material and hardness limits and who can match the collet to a 1/8-inch shank.
  • Buyers who want a non-center-cutting, four-flute carbide tool for square-end milling.

Less suited to

  • Operations requiring center-cutting capability.
  • Buyers who need a confirmed coating specification or a clearly settled maximum hardness rating before selecting a cutter.
LU&MN 1/8-Inch 4-Flute Carbide Square End Mills, 5-Pack · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 135 ratings
  • 5 stars70%70%
  • 4 stars15%15%
  • 3 stars5%5%
  • 2 stars4%4%
  • 1 star6%6%

Customer feedback describes the cutters as sharp and effective, with positive comments about quality and functionality. Opinions are mixed on durability and value, which matters when deciding whether a five-piece set suits repeated or demanding machining. The aggregate ratings lean positive overall, but the feedback does not establish performance for a particular metal, hardness or CNC setup.

Positive themes

  • Customers describe the cutters as sharp and say they cut well.
  • Feedback includes positive assessments of quality and functionality.

Mixed feedback

  • Customer opinions vary on durability.
  • Customer opinions vary on value for money.

Frequently asked questions

How many end mills are in the set?

The listing specifies five items.

Can these cutters be used with a desktop CNC machine?

The listing claims compatibility with most desktop and industrial CNC machines, provided the selected collet fits. Its feature description specifies a 1/8-inch shank.

Are these center-cutting end mills?

No. The listed cut type is Non-Center Cutting.

What hardness range does the listing recommend?

The feature text says materials below HRC 50 are ideal, while another description claims use under HRC 55. Confirm the applicable limit for your material and machining conditions.

LU&MN 1/8-Inch 4-Flute Carbide Square End Mills, 5-Pack · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.8
Milescraft 4701 Advanced Pen Press
Milescraft 4701 Advanced Pen Press

C$98.34

C$78.39

-20%
-20%
Product details in Markdown