Loonie PerksDeals for Canada
BlogSearch
Product guide

eSUN PLA Plus Red 3D Printer Filament, 1.75 mm, 1 kg

eSUN PLA Plus is a red PLA+ filament spool for compatible FDM printers. The listing gives a dimensional tolerance of +/- 0.03mm and recommends a 210℃-230℃ nozzle range and a 45℃-60℃ bed range, making this a defined starting point for buyers whose printer accepts 1.75 mm filament.

At a glance

  • PLA+ formulation is claimed to offer higher strength and toughness than the listing's standard PLA reference.
  • The listing claims low shrinkage and strong layer adhesion, with a specified dimensional tolerance of +/- 0.03mm.
  • Compatible with most FDM printers that use 1.75MM filament, according to the listing.
  • A non-detachable spool is explicitly noted, so it may not suit buyers who require a reusable or detachable spool.
Price
$23.75Save 12%

Reference price: $26.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • The stated 1 kg spool and listed 340-350m length give buyers a useful estimate of material supplied.
  • Recommended nozzle and bed temperature ranges provide a practical starting point for printer setup.
  • The vacuum-sealed packaging includes desiccant, according to the listing.

Cons

  • The spool is non-detachable, which limits spool reuse compared with designs intended to separate or be reused.

Technical specifications

11 specifications
Identity
BrandeSUN
Dimensions and installation
Weight listed1 kg
Filament diameter1.7 millimeters
Filament length340-350m
Materials and protection
Material listedPolylactic Acid
Colour listed1.red
Printing parameters
Dimensional tolerance+/- 0.03mm
Recommended nozzle temperature210℃-230℃
Recommended bed temperature45℃-60℃
Packaging and spool
SpoolNON-DETACHABLE
Packagingsealed vacuum bag with a desiccant bag

What to know before buying

Listing details to confirm

The listing is inconsistent about filament diameter: its title and compatibility claims say 1.75mm, while product details list 1.7 millimeters. Confirm that the selected filament fits your printer, especially if exact diameter specification matters. Temperature settings are recommendations, and the listing suggests a temperature tower to find a suitable setting before a large print.

Who is it for?

A good fit for

  • FDM printer owners whose machine is specified for 1.75 mm filament and who want red PLA+ for general models.
  • Buyers who prefer a 1 kg spool and can use a non-detachable spool.

Less suited to

  • Owners of printers requiring a different filament diameter or a reusable, detachable spool.
  • Buyers seeking customer-confirmed durability, since feedback reports durability concerns and mixed views of strength and reliability.
eSUN PLA Plus Red 3D Printer Filament, 1.75 mm, 1 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 2,582 ratings
  • 5 stars68%68%
  • 4 stars13%13%
  • 3 stars5%5%
  • 2 stars4%4%
  • 1 star10%10%

Customer feedback describes clean prints with little stringing, but also reports disappointment with durability. Opinions are mixed on quality, tangling, reliability, colour accuracy, value and strength. For buyers choosing this PLA+ for everyday FDM prints, the reported print cleanliness is encouraging, while durability concerns make it less reassuring for parts where lasting strength matters. These are customer perceptions, not verified performance results.

Positive themes

  • Feedback highlights clean-looking prints with little stringing.

Negative themes

  • Customers are reported to be disappointed with durability.

Mixed feedback

  • Feedback is mixed on quality, tangling, reliability, colour accuracy, value for money and strength.

Frequently asked questions

What printer is this filament intended for?

The listing says it is compatible with most FDM printers that use 1.75MM filament. However, its product details state 1.7 millimeters, so confirm the diameter against your printer requirements.

What temperatures does the listing recommend?

It recommends a nozzle temperature of 210℃-230℃ and a bed temperature of 45℃-60℃. It also suggests using a temperature tower to find the best setting.

Is the spool detachable?

No. The listing explicitly describes the spool as non-detachable.

eSUN PLA Plus Red 3D Printer Filament, 1.75 mm, 1 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown