Loonie PerksDeals for Canada
BlogSearch
Product guide

Comgrow SH02 Filament Dryer Box, 2-Spool

The Comgrow SH02 filament dryer box is listed with capacity for two 1 kg spools, temperature presets for nine filament types and sealed storage. Its claimed 40–70°C range and adjustable drying settings suit multi-spool drying, while customer feedback raises concerns about fan noise, durability and ventilation.

At a glance

  • Two spool outlets allow feeding filament through PTFE pipes while it is stored in the box.
  • One-key presets are stated for nine filament types, with a maximum drying time of 98 hours.
  • The listing describes sealing rings on the covers, outlet and bottom sealing plate.
Price
$79.19Save 12%

Reference price: $89.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Two-spool capacity can dry two 1 kg rolls at once, according to the listing.
  • The stated 40–70°C range and presets cover several common filament types.
  • Two filament holes support routing filament to a printer while it remains in the box.

Cons

  • Customer feedback reports substantial fan noise, including a high-pitched whine.
  • Some customer feedback describes early unit failures and ventilation concerns.

Technical specifications

16 specifications
Identity
BrandComgrow
ModelSH02
Dimensions and installation
Dimensions listed17.5 x 28.35 x 24.9 cm; 2 kg
Weight listed2 kg
Materials and protection
Material listedPlastic
Drying and capacity
Spool capacityLarge capacity of drying 2 rolls of 1KG filament at the same time
Heater150W PTC heater
Temperature range40-70℃
Preset filament typesPLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP
Maximum drying time98H
Heat-up claimSH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins.
Filament diameter listed1.75 millimeters
Operation and protection
Filament outlets2 filament holes which allow PTFE pipes through
Over-temperature responseWhen PTC temperature exceeds 130°C, it will automatically cut off the heating, and when the PTC temperature drops below 90°C, it will automatically resume heating.
Fan alertIf the fan stops rotating during use, an alarm will sound to prompt you to replace the fan to prevent the PTC module from burning out.
Sealing claimThe upper and lower covers are equipped with sealing rings;The consumables outlet hole is equipped with sealing rings;The lower cover and bottom sealing plate are equipped with sealing rings;Multiple protections to prevent consumables from getting wet.

What to know before buying

Listing details to confirm

Listing details are inconsistent: the product title calls this a dryer box, while an item highlight separately lists 1.75/2.85mm compatibility and the specifications list only 1.75 millimeters. Confirm filament diameter compatibility before buying. The claimed drying results, temperature behaviour and sealed storage performance are not independently confirmed. The one-year warranty description is a listing claim, so confirm its terms for your purchase.

What’s in the box

Included
  • SH02 Black Dryer Box

Who is it for?

A good fit for

  • 3D-printing users who want to dry two 1 kg filament rolls at once.
  • Users who want preset drying choices and filament feed-through holes for printing from the box.

Less suited to

  • Buyers who need a quiet dryer, given customer reports of persistent high-pitched fan noise.
  • Users who require confirmed 2.85 mm compatibility, since the listing details do not agree.
Comgrow SH02 Filament Dryer Box, 2-Spool · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 473 ratings
  • 5 stars62%62%
  • 4 stars18%18%
  • 3 stars8%8%
  • 2 stars5%5%
  • 1 star7%7%

Customer feedback reports effective drying and generally favourable impressions of quality and value, but also flags loud fan noise, some early failures and ventilation concerns. Temperature-control experiences are mixed. These reports matter for a dryer intended for extended heating cycles, but do not establish how any individual unit will perform.

Positive themes

  • Customers describe drying performance favourably.
  • Customers also express positive views about quality and value.

Negative themes

  • Customer feedback raises concerns about high-pitched fan noise and reports that some units stopped working early.
  • Ventilation is also mentioned as a concern.

Mixed feedback

  • Customer experiences with temperature control vary.

Frequently asked questions

How many spools can the Comgrow SH02 dry at once?

The listing claims capacity for two 1 kg rolls at the same time.

What temperatures and filament presets are listed?

The stated temperature range is 40–70°C, with one-key presets for PLA, TPU, PETG, ABS, ASA, PVA, PC, PA and PP.

Can filament feed directly from the box to a printer?

The listing describes two holes for PTFE pipes, allowing filament to feed through while stored in the box.

Is 2.85 mm filament supported?

The item highlight mentions 1.75/2.85mm, but the listed item diameter is 1.75 millimeters. Confirm compatibility with the seller or listing before buying.

Comgrow SH02 Filament Dryer Box, 2-Spool · photo 3
Additional product photo 3

Alternative options

Product details in Markdown