Loonie PerksDeals for Canada
BlogSearch
Product guide

Creality SpacePi X4 Filament Dryer, Dual Chambers

Dual: The Creality SpacePi X4 is a filament dryer with two independently heated chambers, claimed capacity for four spools and separate temperature settings for two filament types. Its broad stated material compatibility and support for 1 kg and 2 kg spools suit multi-printer or high-volume setups, but check spool fit and required drying settings for your filament.

At a glance

  • Two independently heated chambers are claimed to support drying two filament types at different temperatures at once.
  • The listing claims capacity for four spools and says printing can feed four printers simultaneously through eight filament holes and PTFE tubing.
  • Each chamber is described as using a 200W PTC heater, with a stated maximum temperature of 85℃.
  • The listing specifies standard 1.75mm and 2.85mm filament diameters and compatibility with a broad range of materials.
  • A supplementary light has manual and automatic modes, and the fan is claimed to slow after the target temperature is reached.
Price
$209.00Save 13%

Reference price: $239.00

Price checked: Nov 20, 2026

View offer

Pros and cons

Pros

  • Independent chamber temperature settings can suit users drying different filament types in the same unit.
  • Claimed four-spool capacity and multi-printer feed options are useful for larger printing setups.
  • The stated range of filament diameters and materials covers many common and engineering filament types.

Technical specifications

9 specifications
Identity
BrandCreality
Heating and capacity
Heating chambersDual Independent Heating Chambers
Heaters200W + 200W PTC heaters
Maximum temperature85℃
Claimed spool capacity4 spools
Spool sizes1kg/2kg spools
Compatibility and controls
Filament diameters1.75/2.85mm
Compatible materialsPLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU
LightYou can choose to turn the supplementary light on manually or set it to automatic mode.

What to know before buying

  • The listing identifies dual chambers and dual 200W heaters, but does not specify the temperature-control range or provide material-specific drying times, so confirm suitable settings for your filament.

Who is it for?

A good fit for

  • Multi-printer users who want to dry and feed several spools from one unit.
  • Users who need separate drying temperatures for two filament types.
  • Owners of 1.75mm or 2.85mm filament spools, including listed engineering materials.

Less suited to

  • Buyers who need documented material-specific drying times or a stated temperature-control range before purchase.
Creality SpacePi X4 Filament Dryer, Dual Chambers · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 30 ratings
  • 5 stars82%82%
  • 4 stars18%18%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Aggregate ratings are strongly positive, with most ratings in the five-star category and the remainder in the four-star category. This is an encouraging overall signal, but without written feedback it does not identify particular strengths, concerns or how well the claimed multi-spool setup works in practice.

Frequently asked questions

How many spools does the SpacePi X4 hold?

The listing claims it can dry and print with four spools at once, and describes eight filament holes and PTFE tubing. Confirm the selected listing includes the configuration you expect.

Can the two chambers use different temperatures?

The listing says each chamber has an independent PTC heater and can dry two filament types at different temperatures. It does not state the temperature-control range.

Which filament sizes and materials are listed as compatible?

The claimed diameters are 1.75mm and 2.85mm. Listed materials are PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP and TPU.

Does it support large spools?

The listing says the dryer accommodates 1kg and 2kg spools. Check the spool dimensions if your reels are unusually wide or shaped.

Creality SpacePi X4 Filament Dryer, Dual Chambers · photo 3
Additional product photo 3

Alternative options

Product details in Markdown