1 / 5ANYCUBIC Photon P1 Dual-Material Print Kit
The ANYCUBIC Photon P1 Dual-Material Print Kit is an accessory set for the Photon P1 resin printer. It is described as supporting simultaneous printing with different colours or materials, with two resin vats and two printing platforms included in the kit description.
At a glance
- Designed for the ANYCUBIC Photon P1 resin printer.
- Kit description states that it includes two resin vats and two printing platforms.
- Release films are described as pre-installed on the material tanks.
- The listing describes printing with different colours and materials simultaneously without switching resins.
Often bought together
Pros and cons
Pros
- Two vats and two platforms can support keeping separate resin setups ready for the compatible printer.
- Pre-installed release films reduce the setup steps described for the tanks.
- The advertised simultaneous different-colour or different-material workflow may avoid switching resins between prints.
Technical specifications
4 specifications| Brand | ANYCUBIC |
|---|
| Weight listed | 2.29 kg |
|---|---|
| Parcel dimensions and weight | 34 x 27 x 18 cm; 2.29 kg |
| Manufacturer reference | S020313 |
What to know before buying
- The listing says not to fill a resin tank above its marked maximum capacity, to avoid overflow during printing. Confirm Photon P1 compatibility and the selected listing's kit contents before purchase.
Who is it for?
A good fit for
- Photon P1 owners seeking a dual-colour or dual-material resin-printing setup.
- Users who want two vats and platforms available for separate resin setups.
Less suited to
- Owners of resin printers other than the Photon P1, unless compatibility is confirmed.
- Buyers looking for a standalone resin printer rather than an accessory kit.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Only a single rating is supplied, and no customer comments are available. That small rating sample cannot establish how reliably the kit works in practice, so buyers should weigh the stated Photon P1 compatibility and dual-material features against their own setup needs.
Frequently asked questions
Which printer is this kit for?
The listing describes it as compatible with the ANYCUBIC Photon P1 resin printer.
What does the listing say is included?
The kit description specifies two resin vats and two printing platforms. It also says release films are pre-installed on the material tanks.
Can it print two colours or materials simultaneously?
The listing claims support for simultaneous printing with different colours and materials. It does not provide further operating details.
Is there a resin fill limit?
Yes. The listing says to keep resin at or below the maximum capacity mark on each tank to avoid overflow during printing.

Alternative options

6PCS FEP Release Film for Resin 3D Printers, FEP Film for Anycubic Photon M3 Max/ELEGOO Jupiter, 12.8-13.6 Inch 3D Printers, 380x260x0.15mm
$43.99

ANYCUBIC High Clear 3D Printer Resin, Resist Yellowing (High Clear, 1kg) | Highly Transparent, Tough and Resilient, Low Odor Resin, Widely Compatible for All LCD/DLP Resin 3D Printers
$29.99

5pcs FEP Release Films Replacement for Anycubic Photon Mono 2K / Mono 4K / Photon Ultra/Photon D2, Integrated Design Upgrades Resin Vat FEP Film for 3D Printer Accessories, 173 x 115.4 x 0.15 mm
$34.02

Anycubic Kobra X 3D Printer, 4-Colour Printing,19-Color Max | 2X Material Saving, 300℃ Nozzle,Supports PLA/PETG/TPU,Filament Not Included, for Small Business & Studio Use, 260x260x260 mm
$389.00

5PCS FEP Release Films Replacement for Anycubic Photon Mono 2 / Mono 4, Integrated Design Upgrades Resin Vat FEP Film for 3D Printer Accessories, 197x131x0.15mm
$32.22

Full Face Respirator Gas Mask: 6800 Reusable Respirator Mask with Filters 60921 & 2097 - Dust Mask Anti Fog Against Organic Vapor Fumes Gases for Spray Paint Chemicals Epoxy Resin Welding Sanding
$39.99

2pcs FEP Release Films Replacement for Anycubic Photon Mono 2K / Mono 4K / Photon Ultra/Photon D2, Integrated Design Upgrades Resin Vat FEP Film for 3D Printer Accessories, 173 x 115.4 x 0.15 mm
$20.84

ELEGOO ABS-Like 3D Printer Resin 3.0, 405nm UV-Curing Photopolymer Resin for LCD/DLP 3D Printing, with Enhanced Strength and Toughness, High Precision, Low Viscosity, 1000Gram Clear Red
$21.99

Indmird 2 Pack 300W Black Lights, Blacklight Flood Light with Plug and Switch,for Glow Party, Halloween, Fluorescent Poster, Body Paint
$75.99

ELEGOO ABS-Like Ultra Resin Neon-Peach 1000g | Extra Strength and Toughness, Compatible with MSLA/DLP/LCD Resin 3D Printer, Perfect 3D Printer Resin for Tool Application
$25.59

1 x FEP Release Films Replacement for Elegoo Mars 4 / Mars 4 Ultra, Integrated Design Upgrades Resin Vat FEP Film for 3D Printer Accessories, 195.5 x 135.3 x 0.15 mm
$28.81

LET'S RESIN Two-Sided UV Resin Light, Longer time Setting(2m,3m,5m) | With 36 LED Beads, UV Lamp for Resin Curing, Résin Molds,DIY Craft Decor(Own Design Patent)
$42.07
