Loonie PerksDeals for Canada
BlogSearch
Product guide

JUSTMAKER PLAPro Matte Chelsea Red 3D Printer Filament, 1.75 mm, 1 kg

JUSTMAKER PLAPro Matte Chelsea Red is a 1.75 mm PLA+ filament listed as a 1 kg spool. Its matte finish is intended for decorative prints, while the stated temperature and speed ranges give a starting point for printer setup.

At a glance

  • Matte surface is described as flat in appearance and suited to decorative models.
  • The listing gives print settings of 210-230°C nozzle temperature, 30-60°C platform temperature and 40-80 mm/s speed.
  • Cardboard spool is described as having storage holes and being easier to recycle.
  • Brand claims enhanced toughness and about 50% higher impact strength than basic PLA, but this is not independent testing.
Price
$19.35Save 12%

Reference price: $21.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • Matte Chelsea Red finish offers an option for display models where a less glossy surface is desired.
  • Cardboard spool and its stated storage holes may be useful for storage and recycling preferences.
  • The listing provides temperature and speed starting ranges rather than leaving setup entirely unspecified.

Cons

  • Customer feedback includes reports of brittleness and breakage, which may matter for prints that need to withstand handling.
  • Some customers report layer and bed adhesion difficulties, so successful prints may require tuning.

Technical specifications

11 specifications
Identity
BrandJUSTMAKER
ModelPLAPro Matte-CRED-1.75-1KG-1
Dimensions and installation
Weight listed1 kg
Filament diameter1.75mm
Spool diameter18 centimetres
Materials and appearance
Material listedPolylactic Acid
ColourChelsea Red
Spool designcardboard
Printing parameters
Printing temperature210-230°C
Printing speed40-80 mm/s
Dimensional control
Dimensional accuracy+/-0.03mm

What to know before buying

  • The brand describes the filament as compatible with most common printers, including Bambu Lab models, but compatibility is a listing claim and printer-specific settings may need adjustment. Keep filament dry, as the listing's troubleshooting guidance calls for dry filament when addressing nozzle sticking.

Who is it for?

A good fit for

  • Decorative models where a matte Chelsea Red appearance is a priority.
  • Users with a 1.75 mm filament-compatible printer who are comfortable adjusting temperatures, bed setup and extrusion.

Less suited to

  • Prints needing confirmed high durability or dependable layer adhesion, given customer reports of brittleness and adhesion difficulty.
  • Buyers who need independently verified strength or printer-specific compatibility information.
JUSTMAKER PLAPro Matte Chelsea Red 3D Printer Filament, 1.75 mm, 1 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 301 ratings
  • 5 stars74%74%
  • 4 stars8%8%
  • 3 stars6%6%
  • 2 stars2%2%
  • 1 star10%10%

Customer feedback highlights smooth printing, colour, appearance and texture, with some describing the filament as good value. Reports of brittleness and difficulty with layer or bed adhesion are relevant for functional prints, despite the listing's enhanced-toughness claim. Experiences with clogging vary. The aggregate ratings lean positive overall, but do not establish how this particular spool will perform on a given printer.

Positive themes

  • Customers describe printing as smooth and praise the colour, appearance and texture.
  • Some customers consider it good value.

Negative themes

  • Some customers report brittleness, breakage and layer or bed adhesion problems.

Mixed feedback

  • Customer experiences with clogging vary.

Frequently asked questions

What print settings does the listing recommend?

It specifies a printing temperature of 210-230°C, a platform temperature of 30-60°C and a speed of 40-80 mm/s. Treat these as listed starting ranges and tune for your printer.

What finish and colour is this filament?

The listing identifies the colour as Chelsea Red and describes the printed surface as matte.

Is it compatible with Bambu Lab printers?

The listing claims compatibility with most common printer models, including Bambu Lab. It does not identify specific printer models or guarantee a particular setup.

What do customers report about print performance?

Customer feedback praises smooth printing and appearance, but also mentions brittleness, adhesion difficulty and mixed experiences with clogging.

JUSTMAKER PLAPro Matte Chelsea Red 3D Printer Filament, 1.75 mm, 1 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge
Liene 4×6 Photo Printer Refill, 40 Sheets and 1 Cartridge

C$31.63

C$25.54

-19%
-19%

Offer details

  • An Amazon Prime savings offer is indicated.
Product details in Markdown