1 / 7Flex-Hone GBD41232 4.5-Inch, 320-Grit Silicon Carbide Hone
Flex-Hone GBD41232 is a 4.5-inch, 320-grit silicon carbide honing tool listed for deburring and finishing. Its stated bore range is 4.251–4.500 inches, so matching the bore size matters before ordering.
At a glance
- Manufacturer says the oversized construction is intended to help the tool centre and align itself while compensating for wear.
- The listing describes a 320-grit silicon carbide abrasive for mild steel, stainless steel, cast iron and softer ferrous materials.
- The manufacturer gives a typical finish range of 18 - 30 Microinch (.5 - .7 Micrometer).
- Listed for use in a hand drill, drill press or CNC equipment.
Often bought together
Pros and cons
Pros
- The specified 4.251–4.500-inch bore range makes it easier to match the hone to a particular cylinder size.
- The listing identifies both finishing and cross-hole deburring uses, which may suit a shop operation combining these tasks.
Technical specifications
14 specifications| Brand | Flex-Hone |
|---|---|
| Model | GBD41232 |
| Tool diameter | 4.5 inches |
| Grit | 320 Grit |
| Dimensions listed | 34.3 x 11.4 x 0.1 centimetres |
|---|---|
| Weight listed | 708 g |
| Abrasive part length | 6" |
| Shank diameter | 0.310" |
| Overall length | 13.5" |
| Bore diameter range | 4.251"-4.500" |
| Abrasive material | Silicon Carbide |
|---|---|
| Bristle construction | Abrasive Globule Bonded To Flexible Nylon Filament |
| Recommended uses | Deburring, Finishing |
| Stated compatible materials | Mild Steel |
What to know before buying
Listing details to confirm
The specifications state a 4.5-inch tool diameter, while the manufacturer's bore-size instruction specifies use from 4.251"-4.500". Confirm your actual bore falls within that range and order by bore size. The listed dimensions and weight also appear in alternate precision forms elsewhere on the page, so treat the table values as listing details rather than reconciled measurements.
What’s in the box
Included- FLEX-HONE tool
Who is it for?
A good fit for
- Cylinder finishing and cross-hole deburring on compatible bore sizes.
- Users working with mild steel, stainless steel, cast iron or other softer ferrous materials who need a 320-grit hone.
Less suited to
- Buyers whose bore is outside the stated 4.251–4.500-inch range.
- Users seeking an abrasive specified for non-ferrous materials.

Customer reviews on Amazon
- 5 stars
83% 83% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
17% 17%
The available aggregate ratings lean positive, with most shown ratings in the top category, but a smaller portion are at the lowest category. With no review text available, those figures cannot explain the differing experiences or establish how well the hone performs for a particular bore or material.
Frequently asked questions
What bore sizes is this hone listed for?
The listing states a bore range of 4.251"-4.500" and advises ordering by bore size.
What materials is it listed for?
The product title and feature details name mild steel, stainless steel, cast iron and softer ferrous materials.
Can it be used for deburring as well as finishing?
Yes. Deburring and finishing are listed uses, and the manufacturer describes cross-hole deburring.
What drive equipment is specified?
The manufacturer says it can be used in a hand drill, drill press or CNC equipment.

Alternative options

Sporacingrts Manual Piston Ring Filer with 120 Grit Grinding Wheel | Manual piston ring filer includes a 120 grit carbide grinding wheel for accurate piston ring end gap adjustment.
$31.50

RULLINE 80514 Manual Piston Ring Filer 140/170 Grit | Manual piston ring filer with 140/170 grit abrasive wheel for accurate piston ring end gap adjustment.
$30.39

MOTO4U Piston Pin Puller, Plungers Remover Tool Heavy Duty Wrist Pin Puller-Full Skirt Piston Tool with 5 Adapters Piston Bolts (11mm, 13mm, 16mm, 19mm, 22mm) for Small Engine Repairs in Sliver
$48.99

DAYUAN Professional Petrol Engine Compression Tester Kit Set, Red Case | 8 Pcs, 14mm & 18mm Adapters, Dual Scale Gauge, 0-300 PSI/0-20 Bar, Reinforced Rubber Hose, Universal for Cars Motorcycles
$23.72

DUZFOREI 8Pcs Bore Brush, Stainless Steel Wire Brush for Drill 1/4 Hex Shank Twisted Wire Cleaning Tools, for Home Cleaning Outdoor Activities Automotive Repair and Maintenance
$18.99

Xotic Performance™ Tapered Ring Compressor 3.890" Bore | Piston Installation Tool | Engine Assembly Tool | 6061 Aluminum | High-Performance Engine Building | RF008 (3.890")
$52.00

SignalBrick Cell Phone Booster for Home & Cottage, 3G 4G LTE 5G Amplifier | Improve Weak Cell Signal Up to 3,000 sq ft, Ideal for Rural Areas, Compatible with Bell, Telus, Rogers, Fido & More
$179.99

SpeTool Carbide Single Flute CNC Router Bits 1/16" Cutting Diameter 1/4" Shank with TAC Coated, O Flute End Mill Spiral Router Bit for Aluminum Acrylic Metal Milling Cutter
$26.71

STARESSO D6 PLUS Manual Coffee Grinder | Stainless Steel, Conical Burr
$113.21

Amazon Basics Rubber Sanding Block
$7.99

Brush Research Flex-Hone Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 6" (152 mm) Diameter, 240 Grit Size
$200.96
