1 / 7Comgrow SH02 Filament Dryer Box, 2-Spool
The Comgrow SH02 filament dryer box is listed with capacity for two 1 kg spools, temperature presets for nine filament types and sealed storage. Its claimed 40–70°C range and adjustable drying settings suit multi-spool drying, while customer feedback raises concerns about fan noise, durability and ventilation.
At a glance
- Two spool outlets allow feeding filament through PTFE pipes while it is stored in the box.
- One-key presets are stated for nine filament types, with a maximum drying time of 98 hours.
- The listing describes sealing rings on the covers, outlet and bottom sealing plate.
Often bought together

Sukh Orange Silica Gel Desiccant Beads - 430g Reusable Moisture Absorbers | Color Indicating Drying Beads Bulk, Dehumidifying for Camera Lens, Electronics, Books, Documents, Clothes, Jewelry Storage
$12.99

Mini Digital Hygrometer Thermometer Indoor/Outdoor Humidity Monitor 2PCS | LCD Display ℉/℃ Conversion,Fast Response,Outdoor Thermometer with Humidity for Reptile Greenhouse Cellar 3D Printer
$11.99
Pros and cons
Pros
- Two-spool capacity can dry two 1 kg rolls at once, according to the listing.
- The stated 40–70°C range and presets cover several common filament types.
- Two filament holes support routing filament to a printer while it remains in the box.
Cons
- Customer feedback reports substantial fan noise, including a high-pitched whine.
- Some customer feedback describes early unit failures and ventilation concerns.
Technical specifications
16 specifications| Brand | Comgrow |
|---|---|
| Model | SH02 |
| Dimensions listed | 17.5 x 28.35 x 24.9 cm; 2 kg |
|---|---|
| Weight listed | 2 kg |
| Material listed | Plastic |
|---|
| Spool capacity | Large capacity of drying 2 rolls of 1KG filament at the same time |
|---|---|
| Heater | 150W PTC heater |
| Temperature range | 40-70℃ |
| Preset filament types | PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP |
| Maximum drying time | 98H |
| Heat-up claim | SH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins. |
| Filament diameter listed | 1.75 millimeters |
| Filament outlets | 2 filament holes which allow PTFE pipes through |
|---|---|
| Over-temperature response | When PTC temperature exceeds 130°C, it will automatically cut off the heating, and when the PTC temperature drops below 90°C, it will automatically resume heating. |
| Fan alert | If the fan stops rotating during use, an alarm will sound to prompt you to replace the fan to prevent the PTC module from burning out. |
| Sealing claim | The upper and lower covers are equipped with sealing rings;The consumables outlet hole is equipped with sealing rings;The lower cover and bottom sealing plate are equipped with sealing rings;Multiple protections to prevent consumables from getting wet. |
What to know before buying
Listing details to confirm
Listing details are inconsistent: the product title calls this a dryer box, while an item highlight separately lists 1.75/2.85mm compatibility and the specifications list only 1.75 millimeters. Confirm filament diameter compatibility before buying. The claimed drying results, temperature behaviour and sealed storage performance are not independently confirmed. The one-year warranty description is a listing claim, so confirm its terms for your purchase.
What’s in the box
Included- SH02 Black Dryer Box
Who is it for?
A good fit for
- 3D-printing users who want to dry two 1 kg filament rolls at once.
- Users who want preset drying choices and filament feed-through holes for printing from the box.
Less suited to
- Buyers who need a quiet dryer, given customer reports of persistent high-pitched fan noise.
- Users who require confirmed 2.85 mm compatibility, since the listing details do not agree.

Customer reviews on Amazon
- 5 stars
62% 62% - 4 stars
18% 18% - 3 stars
8% 8% - 2 stars
5% 5% - 1 star
7% 7%
Customer feedback reports effective drying and generally favourable impressions of quality and value, but also flags loud fan noise, some early failures and ventilation concerns. Temperature-control experiences are mixed. These reports matter for a dryer intended for extended heating cycles, but do not establish how any individual unit will perform.
Positive themes
- Customers describe drying performance favourably.
- Customers also express positive views about quality and value.
Negative themes
- Customer feedback raises concerns about high-pitched fan noise and reports that some units stopped working early.
- Ventilation is also mentioned as a concern.
Mixed feedback
- Customer experiences with temperature control vary.
Frequently asked questions
How many spools can the Comgrow SH02 dry at once?
The listing claims capacity for two 1 kg rolls at the same time.
What temperatures and filament presets are listed?
The stated temperature range is 40–70°C, with one-key presets for PLA, TPU, PETG, ABS, ASA, PVA, PC, PA and PP.
Can filament feed directly from the box to a printer?
The listing describes two holes for PTFE pipes, allowing filament to feed through while stored in the box.
Is 2.85 mm filament supported?
The item highlight mentions 1.75/2.85mm, but the listed item diameter is 1.75 millimeters. Confirm compatibility with the seller or listing before buying.

Alternative options

Sovol SH02 Filament Dryer Fast up to 70°, Filament Dryer Box Sealed Storage 3D Printer Spool Holder Filament Dehydrator with Touch Screen and PTC Heater, Compatible with PLA PETG TPU ABS 1.75/2.85mm
$79.19

Official Creality Space Pi Filament Dryer Plus | Large Storage Box for 2 Rolls 1KG 1.75/2.85mm 3D Printer Filament, 360° PTC Fast Heating Dehydrator for PLA PETG ABS TPU
$103.55

2025 Skouphy Official Filament Dry Box 2.0 for 3D Printer Filament, Upgrade Temperature Adjustable and 24 Hours Timer Function Filament Storage Dehydrator for PLA PETG
$79.99

Creality Space Pi X4L Filament Dryer Box, 3D Printer 4 Spools Filament Storage Box, Max 75°C Temperature, Dual Independent Heating Chambers & Fan, Rapid Drying for PLA,PETG,TPU,ABS,PET,PC,ASA,PA,PAHT
$152.15

Polymaker Polydryer Filament Dryer & Storage Box for 1kg PA Nylon PLA PETG | Heat Control, 3 in 1: Dry, Store & Print without Breaking the Seal, Fits 1.75/2.85/3.00mm PA Nylon, PLA, PETG, ASA, ABS, TPU
$83.59

AUTENS 40L Electronic Dehumidify Dry Cabinet Box Anti-Mold Storage with Touchscreen, LED Light, Adjustable Shelves for Digital Camera Gear DSLR SLR Lens Equipment & Electrical Components
$268.99

GratKit 3D Filament Dryer Box Firefly V2.0, Smart Filament Dryer | Tuya App Controlled, Up to 70℃,5015 Fan Included, Fit for Most 3D Printer Filaments, PLA, PLA+, PETG, TPU, PVA, ABS, Nylon
$50.15

Creality SpacePi X4 Filament Dryer Box, 3D Printer 4 Spools Filaments Storage Box, Dual Heating Chambers, 200W PTC Heats Up to 85°C, Fast Drying & Moisture-Free Storage for PLA, PETG, TPU, ABS
$209.00

Sovol SH03 Filament Dryer 4 Spools, Dry Box with 85℃ Max Temp, Sealed Filament Storage Box with Auto Dehumiditification, Dual Independent Heating Chambers for PLA PETG ABS TPU ASA PC PA 1.75/2.85mm
$155.79

SOLEYIN PLA Filament 1.75mm Bundle 10KG, 3D Printer Filament PLA Dimensional Accuracy +/- 0.02mm, Black/White/Gray/Red/Yellow/Orange/Blue/Light Green/Green/Purple
$129.99

P2S/X2D Integrated Quick Swap Hotend,0.6mm Hardened Steel Nozzle High Temp Extruder Hot End Replacement with Silicone Cover Compatible with Bambu Lab P2S/X2D 3D Printer
$21.99

FLASHFORGE Creator 5 Pro Industrial 3D Printer, 65°C Active Heated Chamber, HEPA13 Air Filtration, 4-Extruder Independent System, 600mm/s High-Speed Printing, 256mm³Build Volume (Creator 5 Pro)
$1,049.00