1 / 7Anycubic ACE 2 Pro Filament Dryer and Multicolour Feeder
Feeder: Anycubic ACE 2 Pro is a filament dryer and multicolour feeding unit listed for select Kobra 3 printers. It combines active drying and sealed storage with four-colour printing, while 8-colour use requires a second unit and an additional accessory.
At a glance
- The listing claims active drying at 65°C and sealed storage with temperature and humidity sensors.
- A single unit is described as supporting native 4-colour printing. The stated 8-colour setup uses two units and an 8-in-1 or 2-in-1 accessory.
- Auto-refill is described as switching to a matching backup spool when filament runs out.
- The listing specifies compatibility with Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra 3 Max V2.
Pros and cons
Pros
- Combines filament drying and sealed storage in a unit intended to feed filament during printing.
- The stated compatibility list gives owners of the specified Kobra 3 models a clear starting point for checking fit.
- Auto-refill and filament detection may reduce manual changes and setup when using supported Anycubic filament profiles.
Cons
- The listed 8-colour configuration requires a second ACE 2 Pro unit and an additional accessory, rather than one unit alone.
Technical specifications
2 specifications| Brand | ANYCUBIC |
|---|
| Dimensions listed | 45D x 35W x 32H centimetres |
|---|
What to know before buying
- The listing says cardboard spools are not recommended, and says ACE 2 Pro cannot be used simultaneously with the older-generation ACE Pro. Its listed 8-colour capability depends on pairing two units with an 8-in-1 or 2-in-1 accessory.
Who is it for?
A good fit for
- Owners of a listed Kobra 3 model seeking combined filament drying, storage and multicolour feeding.
- Users who expect to use auto-refill with matching backup spools or manage moisture-sensitive filament during printing.
Less suited to
- Owners of printers outside the four listed compatible Kobra 3 models.
- Buyers seeking 8-colour printing from a single unit or planning to use cardboard spools.

Frequently asked questions
Which printers is the ACE 2 Pro listed for?
The listing names the Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra 3 Max V2. It also says the ACE 2 Pro cannot be used simultaneously with the older-generation ACE Pro.
Does one ACE 2 Pro provide 8-colour printing?
No. The listing describes one unit as native 4-colour, and says 8-colour printing requires two ACE 2 Pro units plus an 8-in-1 or 2-in-1 accessory.
Can it dry filament while printing?
The listing claims active drying at 65°C while printing, alongside sealed storage. These are manufacturer claims, not independently verified performance results.
Are cardboard spools recommended?
No. The listing specifically says cardboard spools are not recommended.

Alternative options

Sovol SH02 Filament Dryer Fast up to 70°, Filament Dryer Box Sealed Storage 3D Printer Spool Holder Filament Dehydrator with Touch Screen and PTC Heater, Compatible with PLA PETG TPU ABS 1.75/2.85mm
$79.19

ANYCUBIC ACE GEN 2 Printhead Assembly 3D Printer Accessory, Compatible with Anycubic Kobra X, Kobra X Combo 3D Printers, 2X Time & Material Saving, Built-in 4-Color Printing, Multi-Material Support
$79.99

Anycubic Kobra X 3D Printer Only, 4 Built-in Colors for Beginners | LeviQ 3.0 Auto Leveling,600mm/s High Speed, No Filament Included, 300℃ Nozzle, Built-in Camera, Print Size 260 x 260 x 260 mm
$479.00

Anycubic ACE Pro Multicolor 3D Printer Filament Dryer Box for Kobra 3 Max | Not for Anycubic Kobra S1 and Kobra X, Filament Auto Backup and Intelligent Identification
$242.24

Anycubic Kobra X 3D Printer, 4-Colour Printing,19-Color Max | 2X Material Saving, 300℃ Nozzle,Supports PLA/PETG/TPU,Filament Not Included, for Small Business & Studio Use, 260x260x260 mm
$389.00

ANYCUBIC Kobra S1 ACE 2 Pro Combo 600 mm/s High Speed 3D Printer, LeviQ 3.0 Auto Leveling, Quick Detachable 320℃ Hotend, 65℃ Filament Drying, Ultra-Quiet 44dB, 250x250x250mm Print Size
$689.69

ANYCUBIC Kobra S1 ACE 2 Pro Combo Multi-Color 3D Printer, Up to 16-Color Printing, Fully Enclosed CoreXY, 600 mm/s High Speed, 320°C Hotend & Auto Leveling, Filament Drying, 250×250×250 mm³
$699.99

Anycubic Kobra X Multi-Colour 3D Printer, Easy Setup with Native 4-Color | Up to 19 Colors, Auto Leveling, Filament Not Included, 600mm/s High Speed,300℃ Nozzle and Built-in Camera,260 x 260 x 260 mm
$389.00

Creality SpacePi X4 Filament Dryer Box, 3D Printer 4 Spools Filaments Storage Box, Dual Heating Chambers, 200W PTC Heats Up to 85°C, Fast Drying & Moisture-Free Storage for PLA, PETG, TPU, ABS
$209.00

Anycubic Larger 3D Printer Kobra 3 Max V2, 420×420×500mm³ Print Volume | 300℃ Full-Metal Hotend, Auto-Leveling & Anti-Skip, Support Multicolor Need ACE 2 Pro, 600mm/s Print Speed, Smart Vibration
$609.99