1 / 7VEVOR US075 Underhoist Support Stand, 750 kg Capacity
Capacity: The VEVOR US075 underhoist support stand is a screw-adjusted pole jack for providing partial support to vehicle components during service work. Its listed adjustment range and load rating suit tasks such as positioning a transmission or exhaust component, but the listing says at least two stands are required for use.
At a glance
- A threaded screw adjusts the stand, with a thrust-bearing spin handle for raising or lowering under load, according to the listing.
- The U-shaped support tray has rubber padding, and the base is described as a 0.2-inch-thick circular plate.
- The stand is intended to provide partial support for components during installation or removal, not to replace vehicle lifting equipment.
Often bought together
Pros and cons
Pros
- The screw adjustment and bearing-mounted handle are useful for positioning support at a chosen height.
- A padded U-shaped tray is designed to cushion the supported contact point.
- The listing identifies practical service uses including transmissions, CV joints, radiators, drive shafts and exhaust systems.
Cons
- The listing states that at least two stands are required for use, so a single stand is not presented as a complete setup.
Technical specifications
8 specifications| Brand | VEVOR |
|---|---|
| Model | US075 |
| Listed load capacity | 7.5E+2 kg |
|---|---|
| Minimum height | 52.8 inches |
| Maximum lifting height | 76 inches |
| Dimensions listed | 29.7 x 30 x 134 centimetres |
|---|---|
| Weight listed | 11.7 kg |
| Material listed | Q235B |
|---|
What to know before buying
- The manufacturer describes this as partial support for vehicle components and says to use at least two stands. The stand is not described as a substitute for properly supporting a raised vehicle.
Who is it for?
A good fit for
- Automotive technicians or experienced DIY users who need adjustable partial support while positioning components during under-vehicle service.
- Buyers whose required support height falls within the listed 52.8 to 76-inch range.
Less suited to
- Anyone seeking a stand intended to lift or independently hold an entire vehicle.
- Buyers who need a lower minimum height or a different adjustment range.

Customer reviews on Amazon
- 5 stars
80% 80% - 4 stars
13% 13% - 3 stars
4% 4% - 2 stars
0% 0% - 1 star
3% 3%
Customer feedback reports positive impressions of build quality, functionality, sturdiness, ease of assembly and adjustability. Those points are relevant to a screw-adjusted support stand, though they are customer perceptions rather than confirmation of its rated capacity or safe use. The aggregate rating is mostly five-star, with a smaller one-star share, and does not explain the reasons behind ratings.
Positive themes
- Customer feedback describes the stand as functional and sturdy, and reports straightforward assembly and useful adjustability.
Frequently asked questions
What height range is listed for the VEVOR US075?
The listing gives a minimum height of 52.8 inches and a maximum lifting height of 76 inches.
What is this stand intended to support?
It is described as providing partial support for vehicle components during installation or removal, including items such as transmissions and exhaust systems.
Does the listing say one stand is enough?
No. The listing says at least two stands are required for use.
Can it replace vehicle-support equipment?
The listing describes the stand as partial component support, not as a replacement for equipment used to lift and support a vehicle.

Alternative options

VEVOR Underhoist Support Stand, 3/4 Ton Capacity Under Hoist Jack Stand, Lifting from 38.4 to 75.4 in, Bearing Mounted Spin Handle, Self-Locking Threaded Screw, Two Wheels, Support Vehicle Components
$78.90

VEVOR Underhoist Support Stand, 3/4 Ton (1653 lbs) Under Hoist Jack Stand | Lifting from 54.02" to 83.86", Bearing Mounted Spin Handle, Self-Locking Threaded Screw, Support Vehicle Components
$74.90

VEVOR 18 Gallon Waste Oil Drain Tank, Industrial Fluid Drain Tank with Adjustable Funnel Height, Portable Oil Drainer with Wheels, Fluid Fuel Transfer Drainage for Auto Repair Shops, Garages, Red
$179.90

VEVOR Transmission Jack, 1322 LBS Hydraulic Telescoping Transmission Jack, 34.3"-68.5" High Lift Floor Jack Stand with Foot Pedal, 360° Swivel Wheel, Hydraulic Garage/Shop Lift Hoist
$229.90

VEVOR House Floor Jack, 56"-100" Height Range, 18000 lbs Max Load Capacity, Adjustable Support Beam Basement Jack Post Pole for Leveling, Lift Support Steel Telescoping Jack for Temporary Support
$73.87

VEVOR Screw Jack Post, 4" x 4", 13.2"-18.7" Height Range, 24700 lbs Max Load Capacity, Adjustable Shore Jack, Temporary House Jack Pole for Home Leveling, Lifting Floor Crawlspace Basement Shore Beam
$48.90

VEVOR 21 Gallon Waste Oil Drain Tank, Air Operated Portable Oil Drainer with Adjustable Funnel Height, Industrial Fluid Drain Tank with Wheels, Fluid Fuel Transfer Drainage for Auto Repair Shops, Red
$269.90

VEVOR Jack Stands, 6 Ton (13,000 lbs) Capacity Car Jack Stands Double Locking, 14.2-23 inch Adjustable Height, for Lifting SUV, Pickup Truck, Car and UTV/ATV, Red, 1 Pair
$77.40

YELLOW JACKET Car Jack Stands with Double Locking and Large Foot Base for Lifting SUVS, Heavy Duty Steel, 3 Ton (6,600 lb) Capacity, 1 Pair
$55.99

BullsArmor Jack Stands 6 Ton (12,000 lbs) Capacity - Heavy Duty Professional Steel with Self-Locking for Car, Truck & SUV - Adjustable Height with High Lift Range for Garage & Workshop - Red, 1 Pair
$39.99

SENKEYFE 6 Ton (13,200 LBs) Jack Stands with Double Pin Locking,Rubber Cover and Large Foot Base,15"-23" Adjustable Height,Heavy Duty Car Jack Stands,Lifting Bus,RV,SUV,MPV,Pickup,ATV/UTV,1 Pair,Blue
$72.99

VEVOR Jack Stands, 3 Ton, 6,600 lbs, 10.8-16.3 in Adjustable Height, 1 Pair | Capacity, Heavy Duty Steel Jack Auto Stands, With Double Locking, For Lifting SUV, Pickup, Car, UTV/ATV, Black and Orange
$39.90

