Loonie PerksDeals for Canada
BlogSearch
Product guide

uxcell 12-Tooth #25 Chain Sprocket, 1/4-Inch Pitch, 12 mm Bore

The uxcell 12-tooth roller chain sprocket is listed for single-strand #25 chain with a 1/4-inch pitch and a 12 mm bore. Its C45 carbon-steel construction, black oxide finish and two set screws suit fixed-shaft transmission setups, provided the chain and shaft dimensions match.

At a glance

  • Designed for single-strand #25 chain with a listed 1/4-inch pitch.
  • The 12 mm bore and two set screws are intended for securing the sprocket on a fixed shaft.
  • The listing describes C45 carbon steel with a black oxide finish and heat-treated teeth.
Price
$12.87Save 20%

Reference price: $16.09

Price checked: Nov 18, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The stated chain pitch, tooth count and bore make it easier to compare against a specific drive setup.
  • Two set screws are listed for holding the sprocket on a shaft.
  • The listing specifies a black oxide finish and heat treatment at the teeth.

Technical specifications

14 specifications
Identity
Branduxcell
Chain and sprocket dimensions
Chain designation#25 Chain
Strand configurationSingle Strand
Number of teeth12
Pitch1/4-inch / 6.35mm
Outside diameter28mm / 1.1-inch
Bump width12mm / 0.47-inch
Total width15mm / 0.59-inch
Tooth width2.7mm / 0.11-inch
Materials and finish
Material listedcarbon steel
Specified gradeC45 carbon steel
FinishBlack Oxide
Installation
Set screw arrangementRound hole with 2pcs Set Screws at 90 degrees.
Dimensions and installation
Weight listed0.28 g

What to know before buying

  • The listing states that the sprocket should not run faster than the allowable speed for drive sprockets of the same size, and suggests at least three teeth in mesh with the chain. Confirm drive speed and chain engagement for the intended setup.

Who is it for?

A good fit for

  • Machine transmission setups using a compatible single-strand #25 chain and 12 mm shaft.
  • Buyers replacing a sprocket who can confirm the pitch, bore, tooth count and width against their existing assembly.

Less suited to

  • Installations requiring a different chain pitch or shaft bore.
  • Buyers who need a published maximum operating speed, since none is supplied.
uxcell 12-Tooth #25 Chain Sprocket, 1/4-Inch Pitch, 12 mm Bore · photo 2
Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 16 ratings
  • 5 stars72%72%
  • 4 stars28%28%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Aggregate customer ratings are positive overall, with all reported ratings in the four- or five-star categories. The sample is limited and does not explain why customers rated it this way, so it cannot establish fit or performance for a particular chain-and-shaft setup. Match the listed dimensions to your application.

Frequently asked questions

Which chain is this sprocket listed for?

The listing specifies single-strand #25 chain and a 1/4-inch / 6.35mm pitch. Confirm the chain designation and pitch before ordering.

What shaft bore does it have?

The listed bore diameter is 12mm / 0.47-inch. The listing also describes two set screws arranged at 90 degrees.

What is the sprocket made from?

The listing names C45 carbon steel and a black oxide finish. It also claims the tooth portion is heat treated.

Does the listing state a maximum speed?

No numerical speed limit is provided. It says not to exceed the allowable speed for drive sprockets of the same size.

uxcell 12-Tooth #25 Chain Sprocket, 1/4-Inch Pitch, 12 mm Bore · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
Ayaport Boat Trailer Tie-Down Straps, 2 in x 4 ft, 2-Pack
Black FridayAyaport Boat Trailer Tie-Down Straps, 2 in x 4 ft, 2-Pack

C$25.89

C$22.14

-14%
-14%
Product details in Markdown