Loonie PerksDeals for Canada
BlogSearch
Product guide

SP Scienceware Bel-Art F32947-0000 Vacuum Aspirator Pump

Vacuum: SP Scienceware Bel-Art F32947-0000 is a water-pressure-driven aspirator pump with a quick-disconnect hose fitting. Its listed tubing range and faucet thread size help assess fit, while operation requires water pressure above 11psi.

At a glance

  • Runs using water pressure, rather than a separately powered pump, according to the listing.
  • Quick-disconnect fitting is specified for 6.4 to 9.5mm inside-diameter tubing.
  • The listing states a 9.5mm (3/8") I.D. male-thread faucet connection.
Price
$27.98Save 12%

Reference price: $31.79

Price checked: Nov 20, 2026

View offer

Pros and cons

Pros

  • Quick-disconnect hose fitting supports a stated range of common tubing inside diameters.
  • An integral check valve is claimed to resist corrosive filtrates and fumes.

Cons

  • Requires water pressure above 11psi, which limits use where a suitable water supply is unavailable or insufficient.

Technical specifications

12 specifications
Identity
Brandsp scienceware
Model329470000
Dimensions and installation
Dimensions listed11.4 x 7.4 x 2 centimetres
Weight listed0.03 kg
Faucet connectionMale thread faucet connection is 9.5mm (3/8") I.D
Hose tubing compatibilityQuick-disconnect hose fitting accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing
Materials and construction
Material listedHigh Density Polyethylene
ColourWhite
Exterior finishBrass
Operating and performance claims
Operating water pressureHigh-density polyethylene aspirator pump operates on water pressure above 11psi (7584 N/m2)
Maximum vacuum and flow claimMaximum attainable vacuum is 69.6cm Hg (27.4") with a flow of 6 liters (1.5 gallons) per minute
Check valveIntegral check valve resists corrosive filtrates and fumes

What to know before buying

  • The stated vacuum and flow are listing claims, not independently verified performance. Confirm faucet-thread fit and available water pressure for the intended setup.

Who is it for?

A good fit for

  • Lab users setting up water-pressure-powered aspiration or filtration who need a quick-disconnect hose fitting.
  • Buyers whose tubing is within the stated 6.4 to 9.5mm inside-diameter range and whose faucet connection matches the specified male thread.

Less suited to

  • Setups without water pressure above 11psi or without a compatible faucet connection.
  • Buyers seeking an independently powered vacuum pump, which this listing does not describe.
SP Scienceware Bel-Art F32947-0000 Vacuum Aspirator Pump · photo 2
Additional product photo 2

Customer reviews on Amazon

3.8 / 5 · 3 ratings
  • 5 stars61%61%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars39%39%
  • 1 star0%0%

The supplied evidence contains only aggregate ratings, with a small rating sample and both five-star and two-star ratings represented. That spread suggests experiences may differ, but it does not identify reasons or establish performance. Consider the stated water-pressure requirement and fitting sizes for your setup, and treat the listed vacuum and flow as claims rather than customer-confirmed results.

Frequently asked questions

What powers this aspirator pump?

The listing says it operates on water pressure above 11psi, so it needs a suitable pressurized water supply.

What tubing does the quick-disconnect fitting accept?

The stated range is 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing.

What faucet connection is specified?

The listed connection is a 9.5mm (3/8") I.D. male thread. Check that it matches the intended faucet before buying.

Are the vacuum and flow figures guaranteed?

The listing claims a maximum attainable vacuum of 69.6cm Hg (27.4") with a flow of 6 liters (1.5 gallons) per minute. These are listing claims, not verified measurements.

SP Scienceware Bel-Art F32947-0000 Vacuum Aspirator Pump · photo 3
Additional product photo 3

Alternative options

Product details in Markdown