Loonie PerksDeals for Canada
BlogSearch
Product guide

Sovol SH01 Filament Dryer, SV-SH01-1

SV-SH01-1: Sovol SH01 is a filament dryer and storage box with a built-in fan, temperature and humidity display, and room for up to two narrow spools. Its stated settings run from 40 ° to 50 ° C for 6 to 12 hours, with opening plugs required during heating to let moisture escape.

At a glance

  • A built-in fan is claimed to distribute heat more evenly inside the box.
  • The display shows temperature and humidity in real time.
  • The listing describes sealed, unpowered storage and says desiccant packs can be added, but are not included.
  • The stated spool capacity is two rolls under 70 mm wide, or one roll under 150 mm wide.
Price
$61.59Save 12%

Reference price: $69.99

Price checked: Nov 20, 2026

View offer

Pros and cons

Pros

  • The displayed temperature and humidity and adjustable timer give users a way to monitor and set a drying session.
  • The box can hold two narrow spools or one wider spool, according to the listing.
  • It can be used as sealed storage without power after drying.

Cons

  • Desiccant packs are not included, despite being suggested as an addition to improve storage conditions.

Technical specifications

9 specifications
Identity
BrandSovol
ModelSV-SH01-1
Dimensions and installation
Dimensions listed24.6 x 17.5 x 24.2 cm; 1.4 kg
Weight listed1.4 kg
Drying and operation
Temperature settings40 °, 45 °, 50 ° C
Timer range6 hours to 12 hours
Spool capacity2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm
Room-temperature caveatIf you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃.
Filament routing directioncounterclockwise

What to know before buying

Listing details to confirm

Listing details are contradictory or unconfirmed: the product title cites 1.75 mm and 2.85 mm filament, while product details list 1.75 millimeters, and the title names PLA, PETG, TPU and ABS without a complete compatibility specification. The stated maximum setting may not be reached in rooms below 16℃. Open the top plugs during heating for moisture evaporation, route filament counterclockwise, and confirm spool fit and filament compatibility for your setup.

Who is it for?

A good fit for

  • 3D printer owners who want to dry and feed filament from the same enclosure.
  • Users who want to monitor temperature and humidity while choosing from three stated temperature settings and a 6-to-12-hour timer.
  • Those needing storage for two narrow spools or one wider spool.

Less suited to

  • Buyers who need a stated guarantee of drying results or a specified supported filament list for every material.
  • Users who cannot open the top plugs during heating or need the dryer to reach its top setting in a room below 16℃.
Sovol SH01 Filament Dryer, SV-SH01-1 · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 3,505 ratings
  • 5 stars69%69%
  • 4 stars14%14%
  • 3 stars8%8%
  • 2 stars4%4%
  • 1 star5%5%

Customer feedback describes the dryer as functional and reports satisfaction with its performance, while also mentioning fan durability failures and noise concerns. Opinions are mixed on moisture handling and temperature control. The reported strengths are relevant to its displayed temperature and humidity and built-in fan, but feedback does not establish that every filament type will dry consistently or that the fan will last.

Positive themes

  • Customers report that it works well and gets the job done.
  • Feedback describes satisfaction with drying performance and mentions value and versatility.

Negative themes

  • Some customer feedback reports the fan failing after as little as two weeks and raises noise concerns.

Mixed feedback

  • Customer opinions are mixed on moisture absorption and temperature control.

Frequently asked questions

How many spools can the Sovol SH01 hold?

The listing says it holds two rolls each less than 70 mm wide, or one roll less than 150 mm wide.

What temperature and timer settings are listed?

The stated temperature choices are 40 °, 45 °, and 50 ° C, with a timer from 6 hours to 12 hours.

Should the top plugs stay closed while drying?

No. The listing instructs users to open the top PTFE plugs during heating so moisture can escape.

Can the SH01 reach 50℃ in a cool room?

The listing says it may not reach 50℃ when room temperature is below 16℃, while also claiming this does not reduce the drying effect.

Sovol SH01 Filament Dryer, SV-SH01-1 · photo 3
Additional product photo 3

Alternative options

Product details in Markdown