Loonie PerksDeals for Canada
BlogSearch
Product guide

Red Lion RL-SC33T 1/3 HP Automatic Sump Pump

The Red Lion RL-SC33T is a 1/3 HP automatic sump and light-effluent pump with a tethered float switch and cast-iron construction. Its listed capacity is for low lift, so consider the flow figures at your installation’s lift height rather than treating the maximum as constant.

At a glance

  • Tethered float switch is listed to start at 13 inches and stop at 5 inches of water.
  • Published performance decreases with lift, from 3,350 gph at 0 ft to 960 gph at 20 ft.
  • Can be set to manual operation by unplugging the pump from the switch and plugging it directly into the wall, according to the listing.
  • Manufacturer specifies handling semi-solids up to 3/8 inch and says it is not suitable for sewage removal.
Price
$186.99Save 22%

Reference price: $239.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • Tethered float switch provides automatic on/off operation, with stated activation levels.
  • The listing gives flow figures at several lift heights, which helps compare expected capacity to an installation.
  • Cast-iron construction and a 1-1/2-inch FNPT discharge are specified.

Cons

  • Rated flow falls as lift height increases, so the low-lift maximum may not represent flow at the installed height.

Technical specifications

25 specifications
Identity
BrandRed Lion
Model14942744
Power and motor
Power configurationCorded Electric
Voltage115 volts
Horsepower0.33
Running current4.3 running Amps
Starting current9.4 starting Amps
Running wattage480 running Watts
Starting wattage1030 starting Watts
Motor typePermanent Split Capacitor (PSC) motor with thermal overload protection
Flow and pumping
Performance at 0' lift3,350 gph (12,680 lph)
Performance at 5' lift3,000 gph (11,355 lph)
Performance at 10' lift2,460 gph (9,311 lph)
Performance at 15' lift1860 gph (7,040 lph)
Performance at 20' lift960 gph (3,634 lph)
Shut-off feet/pressure25' (7.62 m); 10.8 PSI (0.75 bar)
Maximum flow rate55 gpm
Maximum lifting height4 feet
Switch and installation
Switch typePiggy-back tethered with 10' (3 m) cord; easily switch to manual mode for testing or maintenance - unplug the pump from the switch and plug directly into the wall
On/off levelsOn at 13"; Off at 5"
Minimum basin diameter18" (457 mm)
Discharge1-1/2" FNPT
Dimensions listed20.3L x 14W x 26.7H centimetres
Materials and handling
Material listedCast Iron
Solids handling3/8" semi-solids suitable for sump pumps or light effluent applications; not suitable for sewage removal

What to know before buying

Listing details to confirm

Listing details are inconsistent: one field gives a maximum lifting height of 4 feet while manufacturer specifications report a 25-foot shut-off, and a separate field gives 55 gpm while the low-lift performance is 3,350 gph. The listed dimensions also differ from the manufacturer's 8" x 5.5" x 10.5" (203 mm x 140 mm x 267 mm), and the product description's 1/2-inch solids claim conflicts with the 3/8-inch specification. Confirm the relevant configuration and figures for your installation. The manufacturer specifies light-effluent use and says this pump is not suitable for sewage removal.

What’s in the box

Included
  • Installation manual
  • Piggy-back tethered float switch
  • Sump pump with 10-ft. cord

Who is it for?

A good fit for

  • Buyers seeking an automatic pump for average-volume sump water removal or light-effluent applications.
  • Installations with a basin at least 18 inches in diameter and a 1-1/2-inch FNPT discharge connection.
  • Buyers who can size the pump using flow at their actual lift height.

Less suited to

  • Sewage removal, which the manufacturer says is not a suitable use.
  • Buyers who need a guaranteed flow rate without considering lift height or resolving the inconsistent listing details.
Red Lion RL-SC33T 1/3 HP Automatic Sump Pump · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 64 ratings
  • 5 stars76%76%
  • 4 stars12%12%
  • 3 stars3%3%
  • 2 stars0%0%
  • 1 star9%9%

Customer feedback describes good performance, quiet operation, build quality and straightforward installation, while durability experiences are mixed. That reported experience is relevant to a pump intended for seasonal water removal, but the customer impressions do not establish its lifespan or verify the listed flow. The aggregate ratings are generally favourable, though a smaller low-star share indicates that experiences are not uniform.

Positive themes

  • Customers report good performance and quiet operation.
  • Feedback describes the pump as well made and installation as straightforward.

Mixed feedback

  • Customers express mixed views about long-term durability.

Frequently asked questions

At what water levels does the automatic switch operate?

The listing says the tethered float switch starts the pump at 13 inches and stops it at 5 inches.

What flow should I expect at different lift heights?

The manufacturer lists 3,350 gph at 0 ft, 3,000 gph at 5 ft, 2,460 gph at 10 ft, 1860 gph at 15 ft and 960 gph at 20 ft. Actual installation conditions matter, and the listing also contains conflicting maximum-flow and lift details.

Can it handle sewage?

No. The manufacturer specifies sump or light-effluent applications and explicitly says it is not suitable for sewage removal.

Can the pump run without automatic switching?

The listing describes manual operation by unplugging the pump from the tethered switch and plugging it directly into the wall, for testing or maintenance.

Red Lion RL-SC33T 1/3 HP Automatic Sump Pump · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.6
Kraus Standart PRO KHU101-17 17-Inch 16-Gauge Undermount Sink
Kraus Standart PRO KHU101-17 17-Inch 16-Gauge Undermount Sink

C$353.99

C$300.89

-15%
-15%
Product details in Markdown