1 / 6Red Lion PW-SP50T 1/2 HP Automatic Sump Pump
The Red Lion PW-SP50T is a corded automatic sump pump with a built-in tethered float switch and thermoplastic construction. Its listed maximum flow is 3,300 GPH at zero lift, with lower stated flow at greater lift heights, so compare the performance curve with your basin and discharge setup.
At a glance
- The built-in tethered float switch is listed to start pumping at 14.5 inches and stop at 5.5 inches.
- The manufacturer lists flow by lift height, including 3,300 GPH at zero lift and 1,500 GPH at 20 feet.
- The listing describes reinforced thermoplastic housing, volute and impeller as corrosion- and rust-resistant.
- A screened intake and lifting handle are listed, along with a 1-1/2-inch FNPT discharge.
Often bought together
Pros and cons
Pros
- Automatic cycling comes from an integral tethered float switch, without a separate switch described in the listing.
- Flow figures at several lift heights make it easier to compare the pump with a planned discharge rise.
- The listed 14-inch minimum basin diameter helps buyers check fit before selecting a pump.
Cons
- The stated flow falls as lift increases, from 3,300 GPH at zero lift to 1,500 GPH at 20 feet.
Technical specifications
24 specifications| Brand | Red Lion |
|---|---|
| Model | PW-SP50T |
| Power configuration | Corded Electric |
|---|---|
| Voltage | 115 volts |
| Horsepower | 0.5 |
| Maximum flow rate | 55 gpm |
| Performance at 0' lift | 3,300 gph (12,492 lph) |
| Performance at 5' lift | 3,000 gph (11,356 lph) |
| Performance at 10' lift | 2,766 gph (10,470 lph) |
| Performance at 15' lift | 2,244 gph (8,494 lph) |
| Performance at 20' lift | 1,500 gph (5678 lph) |
| Maximum lifting height | 26 feet |
| Shut-off | 26' (7.9 m) |
| Running current | 4.5 running Amps |
| Wattage | 500 Watts |
| Operation | Automatic; integral (built-in) tethered switch; on at 14.5" (368 mm); off at 5.5" (140 mm) |
|---|
| Dimensions listed | 22.6L x 17.4W x 28.1H centimetres |
|---|---|
| Weight listed | 4.67 kg |
| Minimum basin diameter | 14" (356 mm) |
| Discharge | 1.5" FNPT |
| Material listed | Thermoplastic |
|---|---|
| Motor protection | 115-volt energy-efficient, thermally protected motor |
| Certification claim | CSA listed in the US and Canada |
| Cord | 8' power cord with 3-prong plug; plugs into standard North American outlets |
|---|
What to know before buying
Listing details to confirm
The listing gives a 3,300 GPH maximum at zero lift, while a separate details field lists 55 gpm. Treat these as listing claims rather than guaranteed installed flow, which depends on lift and plumbing. Verify the 1-1/2-inch FNPT connection and 14-inch basin fit for your setup.
What’s in the box
Included- Installation manual
- Pump with built-in tethered float switch
- 8-ft. cord
Who is it for?
A good fit for
- Homeowners seeking an automatic pump for a residential sump system with substantial water flow.
- Buyers whose sump basin is at least 14 inches in diameter and whose outlet can use a 1-1/2-inch FNPT discharge.
Less suited to
- Buyers who need the listed maximum flow at a substantial discharge lift, since stated flow decreases as lift rises.
- Installations requiring a pump to fit a basin smaller than the listed 14-inch minimum diameter.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
The supplied evidence includes only aggregate ratings, with the small rating sample entirely in the five-star category. That is a positive but limited signal and does not explain customer experiences or establish performance. Buyers should assess the listed flow at their actual lift height and confirm basin and discharge fit.
Frequently asked questions
What flow rate does the PW-SP50T provide?
The listing states 3,300 GPH at zero lift, 3,000 GPH at 5 feet, 2,766 GPH at 10 feet, 2,244 GPH at 15 feet and 1,500 GPH at 20 feet. Actual installed flow depends on the setup.
How does the automatic switch operate?
The built-in tethered float switch is listed to turn on at 14.5 inches and off at 5.5 inches.
What basin and discharge connection does it call for?
The manufacturer specifications list a minimum basin diameter of 14 inches and a 1.5-inch FNPT discharge. Check that both match the installation.
What comes in the package?
The explicit contents list names an installation manual, the pump with built-in tethered float switch and an 8-foot cord.

Alternative options

Red Lion RL-SP50V, 115V, 1/2 HP, 3600 GPH Automatic Sump Pump, 8' Cord | Piggyback vertical float switch, Aluminum/Thermoplastic, For high-volume water removal, 1-1/4" adapter included, 14942743
$185.68

Red Lion RL-SP33T, 115V, 1/4 HP, 3200 GPH Automatic Sump Pump, 8' Cord | Piggyback tethered float switch, Aluminum/Thermoplastic, For average-volume water removal, 1-1/4" adapter included, 14942740
$150.40

Red Lion RL-SS50T, 115V 1/2 HP, 3450 GPH Automatic Sump/Effluent Pump | 10' cord, Piggyback tethered float, Stainless steel, For high-volume water removal in drainage systems, 3/4" solids, 14942781
$183.23

Red Lion RL-SC33V, 115V, 1/3 HP, Automatic Sump/Light Effluent Pump | 3350 GPH, 10' Cord, Piggyback vertical switch, Cast iron, For high -volume water removal, Up to 3/8" semi-solids, 14942747
$229.16

Red Lion RL-50SC, 115V, 1/2 HP, 4000 GPH Automatic Sump/Effluent Pump | 10' Cord, Built-in snap-action switch, Cast iron, High-volume water removal, Up to 1/2" semi-solids, 14942653
$235.00

FOTING 3/4HP 4500 GPH Sump Pump Submersible Sewage/Effluent Pump - Heavy Duty Cast Iron - 115V Automatic Septic Pump for Sump Basin/Residential/Sewage/Basement, 1-1/2" NPT Discharge
$116.99

Red Lion RL-SS100T, 115V, 1 HP, 5300 GPH Automatic Sump/Effluent Pump | 20' cord, Piggyback tethered float, Stainless steel, High-volume water removal in flood-prone areas, 3/4" solids, 14942782
$288.99

Red Lion RL-SS50V, 115V, 1/2 HP, 3450 GPH Automatic Sump/Effluent Pump | 10' cord, Piggyback vertical switch, Stainless steel, High-volume water removal in drainage systems, 3/4" solids, 14942780
$208.24
