Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Green

Polymaker PolySmooth is a green PVB 3D printer filament for users seeking models that can be smoothed after printing. The listing describes alcohol-based smoothing and also references the Polysher, so plan for a post-processing step rather than assuming prints emerge layer-free.

At a glance

  • PVB filament promoted for PLA-like printing conditions and post-print surface smoothing.
  • Listing describes applying 99% IPA alcohol to smooth and gloss the print surface.
  • The manufacturer says the filament absorbs moisture more readily than regular PLA and recommends drybox use.
Price
$12.99Save 57%

Reference price: $29.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • Alcohol-based finishing offers an option for reducing visible layer lines beyond the printing stage.
  • The listed 1.75 mm diameter and green colour make the spool easier to match to a printer setup and project plan.

Cons

  • The stated moisture sensitivity means storage and printing conditions require more attention than the listing suggests for regular PLA.

Technical specifications

10 specifications
Identity
BrandPolymaker
ModelPJ01006
Dimensions and installation
Dimensions listed20 x 20 x 4.5 cm; 750 g
Weight listed750 g
Filament diameter1.75 millimeters
Materials and appearance
Material listedPolyvinyl Butyral
Colour121 - 1.75mm Green (Hex Code: #4ca743)
Printing and finishing
Suggested nozzle and bed settingsNozzle: 200˚C; Bed: 50˚C; Speed: 60mm/s
Print temperature190-220˚C
Print speed40-60mm/s

What to know before buying

Listing details to confirm

Listing details are inconsistent on print settings: one feature gives a nozzle temperature, bed temperature and speed, while the product details give temperature and speed ranges. It also describes alcohol spraying and separately references the Polysher for smoothing, so confirm the intended finishing method and settings before use. The moisture guidance says a drybox is recommended and also says the filament has to be used in one.

Who is it for?

A good fit for

  • 3D-printing users who want green PVB material with an option for post-print surface smoothing.
  • Users prepared to manage moisture-sensitive filament and follow printer-specific settings.

Less suited to

  • Buyers seeking filament that needs no moisture-control planning or additional finishing work.
Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Green · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 2 ratings
  • 5 stars40%40%
  • 4 stars60%60%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

The available aggregate rating is positive, but it is based on only a very small number of ratings. It does not establish how well the filament prints or smooths, so buyers should weigh the listed finishing and moisture-management requirements against their own workflow.

Frequently asked questions

What material is PolySmooth filament?

The listing identifies it as Polyvinyl Butyral, or PVB.

How does the listing say to smooth a print?

It describes applying 99% IPA alcohol to the model, and elsewhere refers to using the Polysher. The exact process is not consistent across the listing, so confirm the intended method before planning a project.

What print settings are listed?

One feature lists a nozzle at 200˚C, a bed at 50˚C and a speed of 60mm/s. Another section gives a 190-220˚C print-temperature range and 40-60mm/s speed range, so treat the settings as conflicting listing guidance.

Does this filament need moisture control?

The listing says it absorbs moisture more readily than regular PLA and recommends drybox use, with another feature saying a drybox is required.

Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Green · photo 3
Additional product photo 3

Alternative options

Product details in Markdown