Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker PolyLite Light Weight PLA Filament, 1.75 mm, Grey, 0.8 kg (PA08003)

PA08003: Polymaker PolyLite Light Weight PLA filament is a grey, low-density PLA option for 3D printing, including lightweight parts such as RC plane components. Its pre-foamed formulation is described as printing without active foaming, while customer feedback reports mixed experiences with printability, quality and other aspects.

At a glance

  • The listing describes a pre-foamed, low-density PLA that does not actively foam while printing.
  • The manufacturer says it uses regular PLA temperature and flow settings, and is compatible with most 3D printers.
  • A matte surface is described as easier to paint and useful for concealing layer lines.
  • The listing recommends turning off the fan for the first layer to improve bed adhesion.
Price
$27.27Save 12%

Reference price: $30.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • Low-density formulation is aimed at reducing print weight, with RC planes and drones cited as use cases.
  • Pre-foamed material is described as avoiding active foaming during printing.
  • Matte finish may suit parts intended for painting.

Technical specifications

15 specifications
Identity
BrandPolymaker
ModelPA08003
Dimensions and installation
Dimensions listed20 x 20 x 6 cm; 800 g
Weight listed0.8 kg
Materials and protection
Material listedPolylactic Acid
Filament details
Diameter1.75 millimeters
Colour114 - Polylite Lw-pla 1.75mm Grey (Hex Code: #94918d)
Print settings listed
Nozzle temperature190–220°C
Bed temperature35–50°C
Cooling fan80%
Print speed50–100 mm/s
Max volumetric speed4mm/s
Retraction distance2.5 mm
Retraction speed40mm/s
Drying instructionsdry at 55°C for 6 hours before use.

What to know before buying

Listing details to confirm

The listing describes the filament as using regular PLA temperature and flow settings, but also supplies specific print settings and says to use 80% fan cooling while advising the fan be off for the first layer. Treat these as listing guidance rather than a guaranteed profile, and confirm settings for your printer and print.

Who is it for?

A good fit for

  • 3D printer owners looking to make lightweight parts, including RC plane components.
  • Makers who want a matte grey PLA surface that can be painted.

Less suited to

  • Buyers who require consistently trouble-free printing, since customer feedback reports mixed printability and stringing experiences.
  • Those seeking a filament specifically described as flexible, since feedback on flexibility is mixed.
Polymaker PolyLite Light Weight PLA Filament, 1.75 mm, Grey, 0.8 kg (PA08003) · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 224 ratings
  • 5 stars65%65%
  • 4 stars13%13%
  • 3 stars7%7%
  • 2 stars5%5%
  • 1 star10%10%

Customer feedback is mixed on printability, quality, flexibility, weight, binding, stringing and value. Some report workable results while others describe concerns, so outcomes may vary by printer and use. The product is presented as low-density PLA for lightweight prints, but the feedback does not establish consistent results for a particular setup. Aggregate ratings lean positive overall, though a notable share is in the lower star categories, which does not explain individual experiences.

Mixed feedback

  • Customer feedback is mixed on printability, quality and flexibility.
  • Reports vary on weight, binding, stringing and perceived value.

Frequently asked questions

What printer settings does the listing provide?

It lists a 190–220°C nozzle, 35–50°C bed, 80% fan cooling, 50–100 mm/s print speed, 4mm/s maximum volumetric speed, 2.5 mm retraction distance and 40mm/s retraction speed. It also advises turning off the fan for the first layer, so confirm the profile with your printer.

Does this filament foam during printing?

The listing calls it pre-foamed and says it will not foam during printing. That is a manufacturer claim, not an independently verified performance result.

What is it intended for?

The listing highlights lightweight applications and names RC planes and drones. It may suit prints where reduced part weight is a priority.

Polymaker PolyLite Light Weight PLA Filament, 1.75 mm, Grey, 0.8 kg (PA08003) · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

5.0
Inkalfa CRG 067 H Black Toner Cartridge 2-Pack, High Yield
Inkalfa CRG 067 H Black Toner Cartridge 2-Pack, High Yield

C$68.39

C$58.47

-15%
-15%
Product details in Markdown