1 / 7Polymaker Panchroma Fluorescent PLA Filament, 1.75 mm, Neon Magenta, 1 kg
Polymaker Panchroma Fluorescent PLA is a 1.75 mm neon magenta filament for FFF/FDM 3D printing, with a fluorescent effect under UV or black light. Its 1 kg spool is aimed at buyers who want a vivid colour effect and a listed starting point for print settings.
At a glance
- Fluorescent colour is described as glowing under UV or black light, rather than as a general glow-in-the-dark effect.
- Listing says the filament is wound to help prevent tangling and is supplied dried, vacuum-sealed with desiccant.
- Manufacturer claims compatibility with open-filament FFF/FDM printers and default settings on most mainstream printers.
Pros and cons
Pros
- Neon magenta fluorescent effect gives prints a distinct appearance under UV or black light.
- The supplied starting settings make initial printer setup more straightforward.
- A 1 kg spool provides the stated quantity for projects requiring more than a small sample.
Technical specifications
11 specifications| Brand | Polymaker |
|---|---|
| Model | CA02009 |
| Material listed | Polylactic Acid |
|---|---|
| Colour listed | Neon Magenta (Hex Code: #F21185) |
| UV or black-light feature | Fluorescent glow under UV or black light |
| Diameter | 1.75 millimeters |
|---|---|
| Weight listed | 1 kg |
| Dimensions listed | 20 x 20 x 6.5 cm; 1 kg |
| Nozzle | 210˚C |
|---|---|
| Bed | 50˚C |
| Speed | 60mm/s |
What to know before buying
Listing details to confirm
The listing specifies passing the filament through the spool's fixed hole after use to help avoid tangles. Its claims of no warping, jamming, blobs or layer delamination and high-speed printing are manufacturer claims, not guaranteed outcomes. The 20 x 20 x 6.5 cm dimensions are listed together with a weight, so treat them as listing details rather than a confirmed spool-only measurement.
Who is it for?
A good fit for
- 3D-printing buyers seeking neon magenta PLA with a UV or black-light fluorescent effect.
- Users of open-filament FFF/FDM printers who want a 1.75 mm filament and a listed print-settings baseline.
Less suited to
- Buyers seeking a colour effect without UV or black light.
- Users whose printer does not accept 1.75 mm filament.

Customer reviews on Amazon
- 5 stars
77% 77% - 4 stars
8% 8% - 3 stars
10% 10% - 2 stars
2% 2% - 1 star
3% 3%
Customer feedback highlights easy printing, vivid colour and perceived overall quality. Those reports are relevant if smooth setup and appearance matter, while the fluorescent effect itself is a listing claim and is specified for UV or black light. Ratings are mostly at the high end but include lower categories, so experiences are not uniform.
Positive themes
- Customers report easy printing and appreciate the colour's vibrancy.
- Customers describe the filament as good quality.
Frequently asked questions
Does this filament glow in the dark?
The listing describes a fluorescent effect under UV or black light. It does not establish a general glow-in-the-dark effect.
What print settings are listed?
The listing gives a nozzle temperature of 210˚C, a bed temperature of 50˚C and a speed of 60mm/s. Treat these as starting settings and adjust for your printer.
Which printers does it fit?
The listing claims compatibility with open-filament FFF/FDM printers and default settings on most mainstream printers. Confirm that your printer uses 1.75 millimeters filament.

Alternative options

Polymaker Panchroma PLA Filament 1.75mm, 1kg, Steel Grey | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Easy Print & Clog-Free & Neatly Wound, Accuracy +/- 0.02mm
$17.57

Polymaker PLA Filament 1.75mm Magenta 1KG Spool, Neatly Wound | Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers
$21.59

Polymaker HT-PLA Filament 1.75mm Grey 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$20.23

Polymaker PLA Pro 3D Printing Filament Black 1KG, High-Impact Tough PLA, Fast Printing up to 300mm/s, Easy to Print, No Enclosure Required, High Speed New Formula, Formerly Polysonic PLA Pro
$21.11

AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Shiny Filament Red Gold Filament, 3D Printer Gradient Pla Filament 1KG/2.2lb Darker New Version Compatible with Most FDM 3D Printers
$30.79

Colourbing Pre-Dried Glow in The Dark PLA+ 3D Printer Filament 1.75mm, Vivid Glow Effect, Tangle Free Vibrant PLA+ 3D Printer Filament, 4 Spools 250g Each - Firefly Blue, Sky Blue, Rainbow5, Rainbow6
$28.04

Polymaker PLA Filament for Cosplay 1.75mm 1KG, Version A | Easy to Sand & Paint, Tangle-Free, Durable, Neatly Wound, 3D Printer Filament for Most 3D Printers
$27.27

Polymaker HT-PLA Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$24.63

ELEGOO Matte PLA 3D Printer Filament Matte White 2KG 1.75mm | Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Carboard Spool (2.2lbs) for Most FDM 3D Printers
$34.19

Polymaker PLA Pro Filament 1.75mm 1KG Light Red, High-Impact Resistance | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$26.99

FLASHFORGE Adventurer 5M 3D Printer, 600mm/s High-Speed, 1 Click Fully Auto Leveling, Upgraded Direct extruder Quick Detachable 280°C Nozzle, Dual-Sided PEI Coating Plate, Print Size 220x220x220mm
$331.00

Polymaker ASA Filament 1.75mm White 1KG, UV & Weather Resistant | Outdoor Functional Parts, Durable, High Heat Resistant, Impact-Resistant, Reliable Layer Adhesion, 3D Printer Filament
$25.51