Loonie PerksDeals for Canada
BlogSearch
Product guide

Nilight 10063W 12V LED Wiring Harness Kit

Nilight 10063W is a wiring harness kit for powering compatible LED light bars or pod lights from a 12V vehicle supply. Its two output leads and 180W stated load limit suit dual fixtures within that limit, while its included relay, fuse and illuminated rocker switch provide a switched wiring setup.

At a glance

  • Two light-output sets are specified for dual light fixtures, with each fixture setup described as less than 180W.
  • The 5-pin SPST rocker switch has two built-in LEDs that illuminate its markings in the dark.
  • The listing describes the harness for 12V battery vehicles and says 24V use requires replacing the original 12V relay with a 24V relay.
Price
$20.83Save 11%

Reference price: $23.43

Price checked: Nov 21, 2026

View offer

Often bought together

Pros and cons

Pros

  • Two output sets support a dual-light installation without requiring a separate output lead for each fixture.
  • The illuminated switch and supplied relay and blade fuse bring switching and circuit-protection components into the described harness kit.

Technical specifications

13 specifications
Identity
BrandNilight
Model10063W
Electrical and compatibility
Supply voltage12V
Maximum stated load180W
Light-output connectorsTwo Sets of light output connectors for dual light fixtures less than 180W.
Harness length12 feet extendable wiring harness
SwitchNilight 5 pin on-off rocker switch with SPST design (single pole single Throw)
Connector type3-pin
Wire diameter1.29 millimeters
Dimensions and installation
Dimensions listed10 x 5 x 5 centimetres
Weight listed0.03 kg
Materials and protection
Material listedCopper, Polyvinyl Chloride (PVC)
Circuit protectionPower relay for safety protection and conversion circuit. Blade fuse protects the circuit when over-current or short circuit occurs. Its load capacity is up to 180W and comes with two extra fuses.

What to know before buying

Listing details to confirm

The title calls this a 5-pin switch harness, while the details field lists a 3-pin connector type and the cable type as 3Pin. These connector descriptions are inconsistent, so confirm the connector arrangement matches your lights before buying. The listing also describes use with 24V only after replacing the original 12V relay.

What’s in the box

  • Wiring harness kitIncluded
  • 5-pin LED rocker switchCheck selected pack
  • InstructionsCheck selected pack
  • Two extra fusesCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Vehicle owners wiring compatible LED pods or a light bar to a 12V supply, with a total stated load below 180W.
  • Installations that need two light-output connectors and a separate illuminated on-off switch.

Less suited to

  • Setups above the stated 180W harness limit.
  • Buyers needing a ready-to-use 24V harness without changing the original relay.
Nilight 10063W 12V LED Wiring Harness Kit · photo 2
Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 290 ratings
  • 5 stars82%82%
  • 4 stars12%12%
  • 3 stars4%4%
  • 2 stars0%0%
  • 1 star2%2%

Customer feedback describes straightforward installation and wiring, positive impressions of functionality and value, and mixed experiences with the included parts. Those reports are relevant to a harness whose stated use depends on matching its outputs and connectors to the lights, but they do not confirm the connector details or package contents for every listing. The rating distribution is mostly five-star, with a smaller spread of lower ratings, so it gives a generally favourable but not uniform picture.

Positive themes

  • Customers describe installation and wiring as easy.
  • Customers report that the harness works for its intended purpose and consider it worthwhile for the cost.

Mixed feedback

  • Feedback on the included parts is mixed.

Frequently asked questions

What lights can this harness be used with?

The listing specifies LED light bars or pod lights on a 12V vehicle supply, with the total stated load up to 180W. The two output sets are described for dual fixtures under 180W.

Can it be connected to a 24V vehicle?

The listing says to replace the included original 12V relay with a 24V relay for a 24V power supply. That replacement relay is not listed as included.

Are the switch and harness connectors clearly specified?

Not consistently. The title specifies a 5-pin rocker switch, but the details list a 3-pin connector type and 3Pin cable type. Confirm the connectors against your light fixtures before purchase.

Nilight 10063W 12V LED Wiring Harness Kit · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.6
mangoal Model B 10-Pin Dashcam Power Adapter
mangoal Model B 10-Pin Dashcam Power Adapter

C$56.94

C$42.70

-25%
-25%
Product details in Markdown