1 / 7Neoteck TL338 Digital Dial Indicator and Magnetic Base Set, 0–1 in Range
Neoteck TL338 is a digital dial indicator and magnetic base set for measuring and alignment tasks. It offers inch/metric switching, zero setting and a stated 0–1 inch range, with a clamp sized for 8 mm stems.
At a glance
- Inch/metric switching and a zero-setting function are listed for the digital indicator.
- The magnetic base has two magnet surfaces and an on/off control.
- The listing identifies 3D printer bed levelling, table saw alignment and workshop alignment as intended uses.
Reference price: $62.99
Price checked: Nov 20, 2026
View offerBlack Friday weekExplore the selectionPros and cons
Pros
- Unit switching and zero setting are useful for repeated alignment checks across inch and metric workflows.
- The adjustable two-arm base is intended to position the indicator at different points around a workpiece.
Cons
- The base's 8 mm clamp does not fit Neoteck mechanical indicators with 9.5 mm stems, and the listing says the two kit bases are not interchangeable.
Technical specifications
12 specifications| Brand | Neoteck |
|---|---|
| Model | TL338 |
| Measuring range | 0-1" (0-25.4mm) |
|---|---|
| Resolution | 0.0005" (0.01mm) |
| Units and zero | Switchable between mm and inch, also has Zero Setting. |
| Maximum tensile force | 176lbs (Please NOTE: 176lbs Tensile Force Requires a Metal Working Surface/Surface with a Thickness of 30mm and Above). |
|---|---|
| Arm dimensions | Lower Arm 4.5"; Upper Arm 4"; Total Height 14.1". |
| Clamp diameter | 8.5mm |
| Compatibility limitation | The magnetic base in this digital dial indicator kit has an 8 mm clamp and is NOT compatible with Neoteck mechanical dial indicators with a 9.5 mm stem. Please note that Neoteck mechanical and digital indicator kit bases are not interchangeable |
| Weight listed | 1900 g |
|---|
| Material listed | Metal |
|---|
| Batteries | 2 LR44 batteries required. (included) |
|---|
What to know before buying
Listing details to confirm
Listing details are inconsistent on base-arm lengths, with one section specifying a 4.5 in lower arm and 4 in upper arm, while another gives 5 in and 4.5 in. The clamp is listed as 8.5 mm in one detail and 8 mm elsewhere. The 176 lb maximum pull is conditional on a metal surface at least 30 mm thick, and the stated battery count of two LR44 batteries differs from the package list's one 1.5V battery. Dimensions also conflict between 27L x 18W centimetres and 27 x 18.01 x 0.25 cm, confirm the selected listing details if these matter.
What’s in the box
Included- Digital indicator
- Magnetic base
- Rear cover
- 1.5V battery (quantity listed as 1)
- Manual
- Box
Who is it for?
A good fit for
- Workshop users positioning an indicator for table saw, lathe or 3D printer alignment tasks.
- Buyers who need a digital indicator with inch/metric switching and a magnetic stand, and whose indicator stem matches the 8 mm clamp.
Less suited to
- Users needing a base compatible with a Neoteck mechanical indicator with a 9.5 mm stem.
- Setups where the magnetic surface is too thin for the stated maximum tensile-force condition.

Customer reviews on Amazon
- 5 stars
66% 66% - 4 stars
20% 20% - 3 stars
6% 6% - 2 stars
1% 1% - 1 star
7% 7%
Customer feedback describes the indicator as good quality and seemingly accurate, and appreciates the stand's adjustable arms and ease of positioning. Reports are mixed on the magnetic base, with some concern about battery life. For alignment work, those base and power concerns matter alongside the listing's conditional holding-force claim and inconsistent battery details.
Positive themes
- Customers describe the product's quality and apparent accuracy favourably.
- Feedback appreciates the stand's adjustment and arm positioning.
Negative themes
- Some customer feedback raises concerns about battery life.
Mixed feedback
- Customer opinions about the magnetic base are mixed.
Frequently asked questions
What measurement range and resolution are listed?
The listing gives a 0–1 inch (0–25.4 mm) range and 0.0005 inch (0.01 mm) resolution. These are manufacturer-stated specifications, not independently verified measurements.
Does the base fit a Neoteck mechanical dial indicator?
No. The listing says this digital kit's 8 mm clamp is too small for a Neoteck mechanical indicator with a 9.5 mm stem, and says the bases are not interchangeable.
What is required for the stated 176 lb magnetic pull?
The listing makes that maximum conditional on a metal working surface at least 30 mm thick. It should not be treated as an unconditional holding-force figure.
Are batteries included?
The details state that two LR44 batteries are required and included, but the explicit package list names one 1.5V battery. The package quantity is therefore unclear in the listing.

Alternative options

Dial Indicator with Magnetic Base, 0-1 inch Dial Test Gauge Indicators Graduation 0.001", 132lbs Mag Base Runout Gauge Set
$65.99

Neoteck 0.0005"/0.01mm Resolution,0-1"/25.4mm Range Digital Dial Indicator | Grey Dial Gauge with Large LCD Display,Inch/Metric Conversion,Zero Setting,Ideal for Mechanical and Industrial Measurement
$26.00

Neoteck 0-1"/0.001" Dial Indicator and 132lbs/60kg Pull Magnetic Base Set | Aluminum Alloy Dial Indicator with 2.5mm Copper Sleeve Probe,Zero Setting Bezel and 3/8" Clamp for Automobile,Workshop Use
$49.54

Neoteck 0-1"/0.001" Dial Indicator and 176lbs/80kg Pull Magnetic Base Set | Dial Indicator with 13.5" Flexible Adjustable Arm,Bezel Zero Setting,Laser Scale,Ideal for CNC,Lathe and 3D Printer
$68.39

Neoteck 0.03"/0.0005" Dial Test Indicator and 90lbs/40kg Magnetic Base Set | Brass Test Indicator Set with 2 Dovetail Clamps,3/8" and 5/32" Mounts,2 Adjustable Arm for Machine Setup,Narrow Spaces-Silver
$45.45

XUNTOP 0-1"/0.0005" Digital Dial Indicator and 176lbs (80kg) Max Pull Magnetic Base Inch/Metric Electronic Indicator and 360°Flexible Stem Holder for 3D Printer Lathe Workshop CNC Machine Table Saw
$59.99

XUNTOP 0-1"/0.0005" Digital Dial Indicator with 90lbs(40kg) Magnetic Base | Magnetic Electronic Indicator with 3 Adjustable Joints, 5/16 inch (8mm) Clamping Diameter,for Lathe CNC 3D Printer
$49.59

Accusize Industrial Tools Outside Micrometer, 3-4", EG00-0004 | 3-4", Ultra-Precision, Carbide Tipped, M-Type, Resolution 0.0001", Ratchet Friction Thimble, Solid Storage Case
$56.00

HDLNKAK Outside Micrometer 0-4",0.0001" Precision Graduation Micrometer Set | Ultra-Precision Standard Micrometer 4 Pcs, Carbide Tipped Measuring Tool with Case, for Machinist, Automotive
$63.99

MILMUMU 1/4" Drive Beam Torque Wrench Precision Instrument | Compatible with SAE and MM Bicycle and Automotive Wrench -0-80 Inch-Pounds, 0-9 Newton Meters
$24.59

Accusize Industrial Tools Inside Micrometer Set, 2-24", 3011-5051 | 2-24" by 0.001" Resolution Inside Micrometer Set
$299.00

QWORK 5/16" to 6" Telescopic Gauge Bore Gauge, 6 Pack Hole Gauge Set, Premium Steel T-Bore Hole Gauges Set, Measurement Tool, Telescoping Full Round Bore Gauge
$25.47























