Loonie PerksDeals for Canada
BlogSearch
Product guide

Neoteck MY2610D Clamp Meter, 800 A AC/DC

The Neoteck MY2610D clamp meter is listed for AC/DC current and voltage checks, with a stated 800 A current range and additional multimeter functions. Its one-wire clamp method and stated 0°C to 40°C ambient condition for current measurements are important operating limits.

At a glance

  • Clamp measurement is intended for one wire at a time, while voltage is measured with the test leads.
  • The listing names resistance, capacitance, frequency, duty cycle, temperature, diode and continuity functions, plus NCV detection.
  • Data hold, backlight and a flashlight are listed for work areas where reading visibility may be limited.
Price
$40.18Save 14%

Reference price: $46.99

Price checked: Nov 20, 2026

View offerBlack Friday weekExplore the selection

Often bought together

Pros and cons

Pros

  • The listed measurement functions cover several common electrical troubleshooting tasks in one instrument.
  • The clamp method can measure current without cutting a wire, when the conductor can be isolated to a single wire.
  • The listed kit includes batteries, test accessories and a storage pouch.

Cons

  • Current measurements have a stated ambient-temperature condition of 0°C to 40°C.
  • The clamp must enclose one conductor only, so a typical intact cable containing both live and neutral conductors will not give a useful current reading.

Technical specifications

15 specifications
Identity
BrandNeoteck
ModelMY2610D
Measurement typeMultimeter
Measurement and features
Maximum direct current800 A
Maximum operating voltage600 volts
Jaw width26mm
Display count6000 Counts
Safety marking claimedCAT III 600V
Power and battery
Power configurationBattery Powered
Batteries3 AAA batteries required. (included)
Dimensions and installation
Dimensions listed18.5 x 7 x 3.5 centimetres
Weight listed191 g
Other listed details
Standards listedCE Marked, RoHS
Upper temperature rating1000 °C
Auto power-off15 minutes

What to know before buying

  • For current measurement, clamp a single wire and keep ambient temperature within 0°C to 40°C. The listing also says to use test leads for voltage. These are manufacturer instructions, not independently verified performance claims.

What’s in the box

  • Clamp meterIncluded
  • Test accessoriesIncluded
  • 3 AAA batteriesIncluded
  • ManualIncluded
  • PouchIncluded
  • ScrewdriverIncluded
  • Test leads, K-type thermocouple and alligator clipsCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Electricians and technically experienced users needing clamp-based AC/DC current checks alongside voltage and other multimeter measurements.
  • Automotive, HVAC and general electrical troubleshooting where the target conductor can be accessed individually.

Less suited to

  • Buyers who need to measure current around an entire multi-conductor power cord without separating a conductor.
  • Users needing verified measurement accuracy or safety performance beyond the manufacturer's listed claims.
Neoteck MY2610D Clamp Meter, 800 A AC/DC · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 309 ratings
  • 5 stars60%60%
  • 4 stars18%18%
  • 3 stars10%10%
  • 2 stars4%4%
  • 1 star8%8%

Customer feedback describes the equipment's quality and value positively, while opinions on performance and accuracy are mixed. That matters for a meter whose listed functions span current, voltage and other measurements, especially when accuracy is central to a troubleshooting decision. Aggregate ratings lean positive overall but do not establish measurement performance.

Positive themes

  • Customers describe the equipment's quality positively.
  • Customers report favourable value for money.

Mixed feedback

  • Customer feedback reports mixed views of performance.
  • Customer feedback reports mixed views of accuracy.

Frequently asked questions

Can this meter measure current around a complete power cord?

The listing specifies single-wire current measurement. If a cord contains both live and neutral conductors within the clamp, their currents can cancel, so isolate one conductor for a current reading.

How does it measure voltage?

The listing says voltage is measured with the red and black test leads, not with the clamp.

What temperature condition is specified for current measurements?

The manufacturer states that ambient temperature during current measurement should remain between 0°C and 40°C.

What is listed in the package?

The contents list names a clamp meter, test accessories, three AAA batteries, a manual, a pouch and a screwdriver. The feature text separately mentions test leads, a K-type thermocouple and alligator clips, so check the selected listing for the exact accessory set.

Neoteck MY2610D Clamp Meter, 800 A AC/DC · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
NEIKO 04204A 25-Piece Hex-Head Multispline Extractor Set
Black FridayNEIKO 04204A 25-Piece Hex-Head Multispline Extractor Set

C$73.26

C$59.11

-19%
-19%
Product details in Markdown