1 / 5LINXINO HTS558 Walnut Blaster Cleaner, 2 kg
Blaster: The LINXINO HTS558 is a walnut-media cleaner for automotive intake pipes and valves. Its listing describes a built-in recovery filter and includes walnut sand, but a separate high-pressure air pump is required and is not included.
At a glance
- Uses walnut media with an external air source to clean carbon deposits from intake passages and valve areas, according to the listing.
- A built-in filter is described as separating recovered walnut media from carbon deposits for reuse.
- The listing says 2 kg of walnut sand is included.
Often bought together
Pros and cons
Pros
- The stated 2 kg media supply and recovery system support repeated cleaning without manual media recovery, according to the manufacturer.
- The listed kit includes goggles, two spray guns and a recycle hose.
Cons
- A high-pressure air pump is required but is not included, so the cleaner is not a complete ready-to-use setup on its own.
Technical specifications
7 specifications| Brand | LINXINO |
|---|---|
| Model | HTS558 |
| Walnut sand capacity | 2 kg |
|---|---|
| Power configuration | AC adapter or DC power supply |
| Colour | Yellow |
|---|---|
| Style | Modern |
| Parcel dimensions | 59.94 x 41.66 x 41.15 cm; 12.93 kg |
|---|
What to know before buying
- The manufacturer calls for air-pump pressure above 0.7Mpa (7bar/102PSI), walnut powder diameter between 0.4-0.8mm and a 2-4KG (4-9LB) media quantity. Its procedure calls for turning the engine off, closing each intake valve and cleaning one intake pipe at a time.
What’s in the box
Included- Intake pipe valve cleaning machine
- Recycle hose and spray gun connector
- Recycle hose
- Goggles
- 2 spray guns
- 2 walnut sand portions
Who is it for?
A good fit for
- Automotive workshops or experienced vehicle owners who already have a suitable high-pressure air pump and need a walnut-media method for intake-area carbon cleaning.
- Buyers looking for a cleaner supplied with walnut media and a recovery filter.
Less suited to
- Buyers who need a complete kit with an air pump included.
- Anyone seeking a plug-in-only cleaning process without engine-specific preparation and one-port-at-a-time work.

Customer reviews on Amazon
- 5 stars
82% 82% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
18% 18%
Aggregate ratings are generally favourable but include a notable low-star share. With a small rating sample and no written review summaries supplied, they do not establish specific strengths or explain concerns. Buyers should assess the supported setup requirements directly, especially the need for a separate high-pressure air pump.
Frequently asked questions
Is the high-pressure air pump included?
No. The listing says a high-pressure air pump is required and not included. It specifies pressure above 0.7Mpa (7bar/102PSI).
How much walnut sand is included?
The listing states 2 kg of walnut sand is included. Its usage tip gives a media quantity range of 2-4KG (4-9LB).
Does the machine recover walnut media?
The manufacturer describes a built-in dust filter and recycle hose that separate recovered walnut media from carbon deposits for reuse.
What preparation does the listed cleaning procedure require?
The instructions say to turn off the engine, close the intake valve by turning the crankshaft, and clean one intake pipe at a time.

Alternative options

QPKING HTS558 Walnut Blaster Kit, 1200W GDI Intake Valve Carbon Cleaner | 23 adapters, 13L tank and 2 kg walnut shell media; external air compressor required, over 0.7 MPa/7 bar/102 PSI
$520.00

QPKING CT160 Fuel Injector Cleaner and Tester Machine, 4-Cylinder, 110V | Heated 28 kHz ultrasonic cleaning and 9 test modes for compatible 12V gasoline injectors in cars and motorcycles.
$359.00

LINXINO CT160 Heated 4-Cylinder Fuel Injector Cleaner & Tester | 45°C Heated Fluid Ultrasonic Cleaning,12-in-1 Cleaning & Leak/Spray/Flow Testing,4-Cylinder Test for Auto/Motorcycle
$359.99

LINXINO CT450 Heated GDI 6-Cylinder Fuel Injector Cleaning Machine & Tester | Standard and GDI Multi-Voltage Coverage, Heated Ultrasonic Cleaning,6‑Injector Visual Comparison & Pulse Injection Testing
$894.38

HTS558 Walnut Blaster Kit for Carbon Cleaning, 1200W Engine Carbon Cleaner | 23 Adapters, 2KG Walnut Sand, 13L Tank & Dust Filter for Cleaning Automotive Intake Valves and Manifolds
$520.00

LUTIFIX Walnut Blasting Machine, with 2KG Walnut Sand Automotive Engine System Intake Pipe Exhaust Valve Cleaning Machine, Carbon Remover Machine, 1200W 110V/220V Sand Blasting for Carbon Cleanin
$485.99

Walnut Blasting Machine, Walnut Blasting Kit for Carbon Cleaning, Automotive Engine System Intake Pipe Exhaust Valve Cleaning Machine, 23 Adapters
$512.99

QPKING HTS558 1200W Walnut Blaster Kit for Intake Valve Carbon Cleaning | For select BMW N54/N55/B58, Audi & VW; 5 adapters, 2 kg media, built-in filter, 13L tank, 110/220V; compressor required.
$509.00

Fuel Injector Cleaner Kit, Non-Dismantle System Tester with 1000ML Capacity, 150PSI for Automotive Intake Valve, Manifold, Throttle Body, Catalytic Converter
$119.00

AUTOOL Automotive Intake Pipe Valve Cleaning Machine AUTO Engine System Cleaner Valvetronic System Walnut Powder Sand Carbon Deposit Clean Machine
$1,549.59

AST603 Electric Brake Bleeder Kit,110V Brake Fluid Bleeder Machine with Liquid Level Monitoring,Easy One Person Operation,Air-Free Filling
$269.99
