1 / 7K&F CONCEPT KF1204.0405.0010 Camera Cage for Insta360 X6
Camera: K&F CONCEPT KF1204.0405.0010 is an aluminum cage designed for the Insta360 X6. It adds a cold shoe and threaded mounting points while the listing says the battery, controls, charging ports and lens remain accessible.
At a glance
- Designed for the Insta360 X6, with access to the lens, battery, power, controls and charging ports claimed by the listing.
- Side cold shoe is intended for a microphone or LED light.
- Two 1/4" threaded holes and a foldable bottom action-camera mount support different mounting setups.
- Snap-on installation uses an orange latch, with safety screws included according to the listing.
- The listed protection features include an anti-scratch silicone pad and silicone lens cover.
Often bought together
Pros and cons
Pros
- Mounting options include a cold shoe, two threaded holes and a foldable bottom mount.
- The hollow-sided design is claimed to allow battery replacement without removing the cage.
- The listed 25 g weight may suit setups where a lighter cage is preferred.
Technical specifications
6 specifications| Brand | K&F CONCEPT |
|---|---|
| Model | KF1204.0405.0010 |
| Mounting type listed | Cold Shoe Mount |
|---|---|
| Dimensions listed | 5 x 5 x 5 cm; 25 g |
| Weight listed | 25 g |
| Material listed | Aluminum |
|---|
What to know before buying
- The listing describes impact protection and a silicone lens cover, but does not specify a protection rating or quantify impact resistance. Confirm the selected listing’s package contents, including the claimed case, safety screws and silicone lens cover, before purchase.
What’s in the box
- Camera cageCheck selected pack
- Safety screwsCheck selected pack
- Silicone lens coverCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Insta360 X6 owners who want a cage with accessory mounting points for a microphone, light or support hardware.
- Users who want claimed battery access without removing the cage.
Less suited to
- Owners of cameras other than the Insta360 X6, since compatibility is listed specifically for the X6.
- Buyers who need a documented impact rating or a fully specified package inventory.

Customer reviews on Amazon
- 5 stars
74% 74% - 4 stars
14% 14% - 3 stars
5% 5% - 2 stars
0% 0% - 1 star
7% 7%
Aggregate ratings lean positive, with most ratings in the five-star category, alongside a smaller one-star share. This gives a generally favourable but not unanimous signal, and the ratings alone do not explain what customers liked or disliked. There is no customer-comment summary to identify specific fit or durability experiences, so buyers should treat the cage’s stated X6 compatibility and access claims as listing details rather than customer-verified findings.
Frequently asked questions
Which camera is this cage designed for?
The listing identifies the Insta360 X6 as the compatible device.
Can the battery be changed with the cage fitted?
The listing says the hollow-sided design allows battery replacement without removing the cage.
What mounting points are described?
The listing describes a side cold shoe, two 1/4" threaded holes and a foldable action-camera mount on the bottom.
What comes in the package?
The case and safety screws are claimed in the listing, but no explicit package inventory is supplied. Check the selected listing for the exact included items.

Alternative options

Aluminum Alloy Cage for Insta360 X6 | Metal Protective Frame Cage with Cold Shoe Mount Magnetic 1/4-inch Threaded Interface for Camera Accessories.
$80.62

SmallRig Cage for Insta360 X6 Accessories, Aluminum Alloy Protective Case | Magnetic Quick Release Mount, Flip-Out Top Stand, with 1/4" Threaded Holes & Cold Shoe Mount, Built-in Pogo Pin Contacts
$46.90

K&F CONCEPT Camera Cage for Insta360 X5, Protective Case with Lens Cover | Silicone Lens Cover, Aluminum Alloy Frame with 2 Cold Shoe Mounts, Built-in 1/4" Screw Hole for Microphone and LED Light CI01
$50.99

Tilta X5 Cage Full Camera Cage Compatible with Insta360 X5 | 1/4"-20 thread, cold shoe receiver, rotating support, titanium grey TA-T90-FCC-TG
$52.97

TELESIN Metal Protective Cage for Insta 360 X5 Accessories, Ultra Light Aluminum Alloy Cage Frame for Insta 360 X5, with Lens Protection Cover, Double Cold Shoe Mount&Universal Quick Release Mount
$56.99

Insta 360 x3 Lens Protector, PULUZ Dual Lens Guards for Insta360 X3 Protective Case Optical Tempered Glass Camera Accessories for Insta 360 x3 Accessories Waterproof (Upgrade)
$39.99

CYNOVA Premium Lens Guard for Insta360 X6, 9H Tempered Glass Lens Cover | HD Clear Scratch-Resistant Camera Lens Cover, Precision-Fit Protective Glass for Insta360 X6 Camera, Insta 360 X6 Accessories
$26.39

SmallRig Cage for Insta360 X5 Accessories, Aluminum Alloy Protective Case | for Insta360 X5 with Quick Release, Bulit-in Cold Shoe Mounts & 1/4'' Threads, with Silicone Lens Guard Cap
$44.12

Tilta Full Camera Cage Compatible with Insta360 X3 | Aluminum & Stainless Steel Construction Casing | Two ¼” Threads | Cold Shoe Mount | Quick Release | GoPro Mount | (Black) TA-T41-FCC-B
$47.97

AMAZEAR Metal Protective Case for Insta360 X5 Accessories | X5 Multifunction Utility Frame Stronger Construction Aluminum Cage Quick-Release Base Plate, Various Expansion Mounts
$51.99

FitStill Aluminum Frame Cage Carrying Hard Shell Travel Storage Case Silicone Lens Cover Protective Only for Insta 360 X4 Anti-Scratch Metal case Housing Shell Accessories Kit(Not for Insta 360 X5)
$49.99

MxSpvce Insta360 X6 Accessories,Curved 9H Tempered Glass Screen Protector | 2-Pack,Works Reliably From -20°C(-4°F) to 60°C(140°F),Ultra HD, 9H Hardness,Touch Sensitive,Bubble-Free
$12.99
























