1 / 7JUSTMAKER PLAPro Matte Light Brown 3D Printer Filament, 1.75 mm, 1 kg
Printer: JUSTMAKER PLAPro Matte filament is a 1.75 mm, 1 kg light-brown PLA option for decorative 3D prints. Its matte finish and stated print settings may suit display models, while customer feedback also flags breakage and bed-adhesion concerns.
At a glance
- The maker describes a matte, flat print surface intended to make layer lines less obvious.
- Suggested settings are 210–230°C nozzle temperature, 30–60°C platform temperature and 40–80 mm/s printing speed.
- The listing describes a cardboard spool with storage holes and states compatibility with many common printer models, including Bambu Lab.
Pros and cons
Pros
- Matte light-brown finish is suited to decorative prints where a subdued surface appearance is desired.
- Suggested temperature, platform and speed ranges offer a starting point for setup.
- The manufacturer says the cardboard spool is designed for easier recycling and includes storage holes.
Cons
- Some customer feedback reports brittle filament, breakage and difficulty getting prints to adhere to the bed.
Technical specifications
8 specifications| Brand | JUSTMAKER |
|---|---|
| Model | PLAPro Matte-LTBN-1.75-1KG |
| Weight listed | 1 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Suggested printing temperature | 210-230°C |
| Suggested printing speed | 40-80 mm/s |
| Material listed | Polylactic Acid |
|---|---|
| Colour | Light Brown |
What to know before buying
- Customer experiences on clogging are mixed. The maker's claimed impact-strength improvement of about 50% over basic PLA does not negate customer reports of brittleness, so consider the intended print's durability and tune adhesion and settings as needed.
Who is it for?
A good fit for
- Decorative models where a matte light-brown appearance is a priority.
- Users whose printer accepts 1.75 mm PLA filament and who can tune settings within the stated ranges.
Less suited to
- Prints that depend on dependable bed adhesion or resistance to breakage without further setup and validation.

Customer reviews on Amazon
- 5 stars
74% 74% - 4 stars
8% 8% - 3 stars
6% 6% - 2 stars
2% 2% - 1 star
10% 10%
Customer feedback describes smooth printing and positive impressions of colour, appearance and texture, while some users report brittleness, breakage and difficulty with bed adhesion. Clogging experiences are mixed. For decorative work, reported appearance benefits may matter, but these durability and adhesion concerns are relevant when choosing jobs that need reliable layer or bed attachment.
Positive themes
- Customers describe smooth printing and praise the colour, appearance and texture.
- Some customers consider it good value.
Negative themes
- Some customers report brittleness and breakage.
- Some customers report poor layer or bed adhesion.
Mixed feedback
- Customer experiences with clogging vary.
Frequently asked questions
What print settings does the listing suggest?
It gives a printing temperature of 210–230°C, a platform temperature of 30–60°C and a speed of 40–80 mm/s. Treat these as starting points and adjust for your printer.
What is the filament diameter and listed material?
The listing identifies it as 1.75 millimeters in diameter and made of Polylactic Acid.
Is the spool cardboard?
The listing describes an upgraded cardboard spool with storage holes. Confirm the selected listing if spool material matters to your setup.
What should I know about customer feedback?
Feedback praises printability and appearance, but also includes reports of brittleness and bed-adhesion difficulty. Clogging experiences vary.

Alternative options

JUSTMAKER PLA 3D Printer Filament, Upgrade Cardboard Spool, Print with Most 3D Printers, Dimensional Accuracy +/-0.03mm, 1.75mm, 1kg, Brown
$18.99

ELEGOO Rapid PLA Plus 3D Printer Filament 1.75mm Coffee Brown 1KG | 600mm/s High Speed Printing, Enhanced Toughness, +/- 0.02mm Accuracy, 1kg Cardboard Spool(2.2lbs) for Most 3D Printers
$21.24

ELEGOO PLA Matte 3D Printer Filament 1.75mm Beige 1KG | Rich Matte Color, Less Visible Layer Lines, High Precision, 1kg Plastic Spool, Fits for Most FDM 3D Printers
$20.69

JUSTMAKER PLA Silk 3D Printer Filament, Upgrade Cardboard Spool, Silk Shiny Filament, Dimensional Accuracy +/-0.03mm, 1.75mm, 1kg, Copper
$18.99

ELEGOO PLA+ 3D Printer Filament 1.75mm White 4KG | High Toughness PLA Plus, Dimensional Accuracy +/- 0.02mm, 4pcs 1kg Spools, Fits for Most FDM 3D Printers
$49.29

ANYCUBIC PLA 3D Printer Filament, Intelligent Identification, 1KG, Grey | 1.75mm Dimensional Accuracy +/- 0.02mm, Stronger Adhesion & Neat Winding, Clog-Free & Bubble-Free, Fit with Most 3D Printers
$18.56

Polymaker HT-PLA Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$24.63

JUSTMAKER ABS Transparent 3D Printer Filament, Upgraded Strength Heat Resistant Filament, Low-Odor Transparent Material, Dimensional Accuracy +/-0.03mm, 1.75mm, 1 kg (2.4 lbs), Black
$19.54

JUSTMAKER PLA 3D Printer Filament, Upgrade Cardboard Spool, Print with Most 3D Printers, Dimensional Accuracy +/-0.03mm, 1.75mm, 1kg, Chocolate
$21.11

ELEGOO PLA 3D Printer Filament 1.75mm Brown 1KG, Vibrant Color | Neatly Wound for Smoother Feeding, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), Fit Most FDM 3D Printers
$23.49
Offer details
- The observed savings offer is limited to Amazon Prime.