Loonie PerksDeals for Canada
BlogSearch
Product guide

iSANMATE PLA-DC10 Dual-Colour PLA Filament, 1.75 mm, 4 × 250 g

The iSANMATE PLA-DC10 is a four-spool PLA filament bundle with dual-colour and colour-changing effects. Its 1.75 mm diameter and stated print settings suit compatible FDM printers, while customer feedback reports mixed printability and some brittleness concerns.

At a glance

  • The listing describes a silk PLA with a dual-colour, colour-changing appearance.
  • The four-pack is listed as 250 g per spool, useful for trying several colour combinations without buying full-size spools.
  • The supplied print guidance varies between sections, so settings may require calibration for the specific printer.
Price
$30.99Save 14%

Reference price: $35.99

Price checked: Nov 20, 2026

View offerBlack Friday weekExplore the selection

Often bought together

Pros and cons

Pros

  • Four colour-combination spools offer several looks in a single bundle.
  • A stated 1.75 mm diameter targets printers that accept that filament size.
  • The listing provides temperature, bed and speed guidance as a starting point.

Cons

  • Customer feedback reports brittleness and breakage during use, which may interrupt prints and waste material.

Technical specifications

15 specifications
Identity
BrandiSANMATE
ModelPLA-DC10
Dimensions and installation
Dimensions listed1 x 1 x 1 cm; 1.23 kg
Weight listed1.23 kg
Filament diameter1.75 millimeters
Nozzle size0.4mm
Material and appearance
MaterialPolylactic Acid
Listed colour combinationsRose Red+blue, Yellow+blue, Red+black, Gold+purple
Additional featureColor-changing effect
Print settings
Recommended print speed50-100mm/s
Recommended hot bed temperature50 – 60°C
A+ printing speed30 - 60mm/s
A+ printing temperature195 ~ 225℃
Dimensional accuracy+/- 0.03 mm
Pack details
Number of items4

What to know before buying

Listing details to confirm

The listing is inconsistent on recommended print speed, giving 50-100mm/s in one section and 30 - 60mm/s in another. It also gives different colour lists, so confirm the selected combination and use a temperature bridge or other printer-specific calibration before printing. The listed dimensions and weight are presented together as 1 x 1 x 1 cm, 1.23 kg, so treat the dimensions as unclear. Store opened filament sealed to limit moisture exposure, as the listing advises.

Who is it for?

A good fit for

  • FDM printer owners whose machines accept 1.75 mm PLA and who want small quantities of multicolour silk filament.
  • Hobbyists making decorative models where a colour-changing finish is more important than predictable, uniform colour.

Less suited to

  • Buyers who need large quantities of a single colour or consistent single-colour output.
  • Users who cannot accommodate the possibility of brittle filament or variable print results reported by customers.
iSANMATE PLA-DC10 Dual-Colour PLA Filament, 1.75 mm, 4 × 250 g · photo 2
Additional product photo 2

Customer reviews on Amazon

4 / 5 · 3,441 ratings
  • 5 stars62%62%
  • 4 stars12%12%
  • 3 stars8%8%
  • 2 stars6%6%
  • 1 star12%12%

Customer feedback is mixed on printability, colour, print quality, quality and value, with reports that filament can arrive brittle and break during use. That matters for this four-spool 1.75 mm PLA bundle because interrupted prints can reduce usable material, while print results may vary. The overall rating distribution includes both many five-star ratings and a notable lower-star share, so it does not establish consistent performance.

Negative themes

  • Customers report brittleness and filament breaking during use.

Mixed feedback

  • Customers express mixed experiences with overall quality, printability, colour, print quality and value.

Frequently asked questions

Will this filament fit my 3D printer?

The listing specifies a 1.75 millimeter filament diameter and describes use with FDM printers. Confirm that your printer accepts this diameter and the stated PLA printing conditions.

What print settings should I start with?

The listing gives a printing temperature of 195°C-225°C (depending on the printer model) and a hot bed temperature of 50 – 60°C. Its speed recommendations conflict, so calibrate on your printer rather than relying on one speed range.

How much filament is in the bundle?

The title and product details describe four 250 g spools. Check the selected listing for the exact colour combinations, since the colour lists differ across its sections.

What do customers report about performance?

Feedback is mixed on printability, colour and print quality, and some customers report brittleness and breakage. These are reported experiences, not a guarantee of how a particular spool will perform.

iSANMATE PLA-DC10 Dual-Colour PLA Filament, 1.75 mm, 4 × 250 g · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.0
JAYO PETG Filament Bundle, 1.75 mm, 4.4 kg, Black
Black FridayJAYO PETG Filament Bundle, 1.75 mm, 4.4 kg, Black

C$49.99

C$47.49

-5%
-5%
Product details in Markdown