Loonie PerksDeals for Canada
BlogSearch
Product guide

Geekpure RO-100G-4 4-Stage RO/DI Water Filter, 100 GPD

Geekpure RO-100G-4 is a portable four-stage reverse-osmosis and deionization filter intended for aquarium use and also described for drinking water. Its stated 100 gallons-per-day capacity is conditional on 60 psi, and its tankless, faucet-free setup needs manual operation rather than automatic on/off cycling.

At a glance

  • Four filtration stages are described as sediment, carbon, reverse osmosis and deionization, with the DI stage intended to further reduce TDS in RO-treated water.
  • Manufacturer states 100 gallons per day at 60 psi, about 260 ml per minute, and a 1:2 pure-water-to-waste-water ratio.
  • Tankless design has no faucet and cannot switch itself on and off automatically.
  • New filters require a 30-minute flush before first use.
Price
$81.21Save 19%

Reference price: $99.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • A separate DI stage is useful for aquarium applications that call for further TDS reduction after reverse osmosis.
  • Quick-connect fittings and colour-coded tubing are described for DIY setup.
  • Manual water-pressure operation avoids a powered pump requirement, according to the listed power configuration.

Cons

  • No storage tank or faucet is included, and the system cannot automatically cycle on and off.
  • The stated 1:2 pure-water-to-waste-water ratio means the listed output involves wastewater as well as filtered water.

Technical specifications

18 specifications
Identity
BrandGeekpure
ModelRO-100G-4
Filtration and capacity
Purification methods['Reverse Osmosis', 'Sand', 'Activated Carbon', 'Deionization']
Capacity100 gallons
Maximum flow rate380 liters_per_day
Stated capacity condition100 gallons per day at 60 psi
Pure water to waste water ratio1:2
Maximum feed-water TDS1000
Operating conditions
Power configurationManual (Water Pressure)
Operating pressure range40-100 psi
Feed-water temperature range40 °F
Upper temperature rating110 °F
Dimensions and installation
Installation typeFreestanding
Weight listed2.27 kg
RO tube size1/4 inches
Maintenance
Filter life cycle12 months
DI filter use guidance3-6 months
Product shelf life3 years

What to know before buying

  • The stated 100 GPD figure is at 60 psi. Feed-water requirements are listed as 40-100 psi, 40-110F/5-45C, pH 3.0-11.0 and maximum TDS 1000 ppm. Output depends on feed-water conditions.
  • Flush new filters for 30 minutes before use. The manufacturer says the DI stage is installed after the RO stage and generally lasts 3-6 months, while overall filter life is described as 6-12 months depending on use and water quality.
  • The listing describes NSF/ANSI-compliant components, specifically tubes, quick-push fittings and the RO membrane, not a certification of the complete system.

Listing details to confirm

Listing details are contradictory or inconsistent: dimensions are given as both 37.6L x 12.7W x 23.4H centimetres and 37.59 x 23.37 x 13.21 cm, filtration-stage descriptions vary on whether the carbon stage comes before or after the RO membrane, and the 100 gallons capacity entry does not itself specify a time period, while feature copy claims 100 gallons per day at 60 psi. Confirm the selected listing’s configuration and dimensions before purchase. The claimed near-zero TDS is a manufacturer statement, not a guaranteed result.

What’s in the box

Included
  • 4 filters
  • Diverter valve
  • Wrench
  • Fittings
  • Water pipe
  • Clips

Who is it for?

A good fit for

  • Aquarium keepers looking for a portable RO/DI unit with a stated 100 GPD capacity at 60 psi.
  • Users able to connect to a suitable pressurised water source and manage manual operation.
  • Buyers comfortable flushing filters and replacing the DI stage based on use and feed-water quality.

Less suited to

  • Anyone who needs an included faucet, storage tank or automatic on/off operation.
  • Buyers who cannot meet the stated feed-water pressure and temperature conditions or do not want to handle wastewater.
Geekpure RO-100G-4 4-Stage RO/DI Water Filter, 100 GPD · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 577 ratings
  • 5 stars64%64%
  • 4 stars15%15%
  • 3 stars8%8%
  • 2 stars3%3%
  • 1 star10%10%

Customer feedback reports that the unit works as intended, with positive remarks about installation and TDS results. Experiences are mixed on output quality and value, while reported concerns include parts breaking during installation or after first use and leakage. These reports matter for a system that relies on user setup and water connections, but do not establish that every unit has those problems. Ratings lean positive overall, though a notable lower-star share means the aggregate should not be treated as proof of consistent performance.

Positive themes

  • Customers report that the unit works as intended and that installation is easy.
  • Customers express satisfaction with the TDS level.

Negative themes

  • Customer feedback raises concerns about durability, including a feed-in valve reportedly breaking after first use and pieces breaking during installation.
  • Customers also report leakage concerns.

Mixed feedback

  • Feedback is mixed on output quality, value for money and whether all parts are present.

Frequently asked questions

Does the system include a tank or faucet?

No. The listing states it is tankless and without a faucet, and says it cannot turn itself on and off automatically. A separate drinking-water kit with a 2.8 gallon tank is mentioned as available separately.

What does the 100 GPD rating mean?

The feature copy states 100 gallons per day at 60 psi, approximately 260 ml per minute. Actual output depends on feed-water conditions, and the stated pure-water-to-waste-water ratio is 1:2.

How long should the filters last?

The listing gives 6-12 months for filter life depending on use and feed-water quality, and separately says the DI filter generally lasts 3-6 months. Flush new filters for 30 minutes before first use.

Can it reduce TDS to zero?

The manufacturer describes the DI stage as reducing TDS to near 0 ppm after the RO membrane. This is a listing claim, not a guaranteed measurement for every water source.

Geekpure RO-100G-4 4-Stage RO/DI Water Filter, 100 GPD · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AQUASMITH AFan-220 Aquarium Cooling Fan
AQUASMITH AFan-220 Aquarium Cooling Fan

C$82.18

C$73.38

-11%
-11%
Product details in Markdown