Loonie PerksDeals for Canada
BlogSearch
Product guide

Flex-Hone GB41832, 4-1/8 in, 320-Grit Silicon Carbide

Flex-Hone GB41832 is a 4-1/8-inch, 320-grit silicon carbide honing tool listed for mild steel, stainless steel, cast iron and softer ferrous materials. Its flexible abrasive globules are intended for bore finishing and deburring, including crosshole work, but buyers should confirm the bore size and finishing requirements suit this tool.

At a glance

  • A 320-grit silicon carbide abrasive is listed for mild steel, stainless steel, cast iron and softer ferrous materials.
  • Flexible nylon filaments carry abrasive globules, and the manufacturer describes the design as self-aligning and self-centering.
  • Intended for bore finishing and crosshole deburring, with use in a hand drill, drill press or CNC equipment claimed.
Price
$109.46Save 23%

Reference price: $142.11

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Combines bore finishing and deburring in a single tool setup, including for crossholes and slots.
  • The flexible filament construction is described as self-centering, self-aligning and able to compensate for wear.
  • Manufacturer lists compatibility with several ferrous materials, not only mild steel.

Technical specifications

12 specifications
Identity
BrandFlex-Hone
ModelGB41832
Size and construction
Diameter4.13 inches
Dimensions listed34.3 x 10.5 x 0.1 centimetres
Weight listed454 g
Bristle constructionAbrasive Globule Bonded To Flexible Nylon Filament
Abrasive and applications
MaterialSilicon Carbide
Grit320 Grit
Listed usesDeburring, Finishing, Polishing
Compatible material listedMild Steel
Other listed details
ColourGray
Country of originUSA

What to know before buying

Listing details to confirm

The listing gives a 4-1/8-inch (105mm) diameter in the title, while the technical details list 4.13 inches. Dimensions are also shown in differing precision, so confirm the required fit and selected listing details before purchase. The claimed finish of 18 - 30 Microinch (.5 - .7 Micrometer) is a manufacturer specification, not an independent result.

What’s in the box

Included
  • Brush Research GB41832 FLEX-HONE®, 4-1/8" (105mm)

Who is it for?

A good fit for

  • Machinists or engine and cylinder rebuilders finishing bores around the listed tool diameter.
  • Buyers needing a 320-grit abrasive tool for ferrous materials and crosshole deburring.
  • Users with a suitable rotating spindle, such as a hand drill, drill press or CNC equipment.

Less suited to

  • Work requiring a different diameter, grit or abrasive material.
  • Applications outside the listed ferrous materials without separate compatibility confirmation.
Flex-Hone GB41832, 4-1/8 in, 320-Grit Silicon Carbide · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 72 ratings
  • 5 stars84%84%
  • 4 stars10%10%
  • 3 stars0%0%
  • 2 stars2%2%
  • 1 star4%4%

Aggregate ratings are mostly at the five-star end, but a smaller share is in the one- and two-star categories. With no customer-comment summary supplied, these ratings do not identify specific strengths, complaints or reasons for the differences. For a specialized 320-grit hone, confirm the size and material match your job rather than treating the overall rating as evidence of a particular finishing result.

Frequently asked questions

What material and grit does the GB41832 use?

The listing specifies silicon carbide and 320 grit, with mild steel, stainless steel, cast iron and softer ferrous materials named as suitable work materials.

What is the listed diameter?

The title says 4-1/8 inches (105mm), while product details give 4.13 inches. Confirm the size against your bore and the selected listing before ordering.

What work is this hone intended for?

Listed uses include deburring, finishing and polishing. The manufacturer also describes bore and cylinder finishing and crosshole deburring.

What equipment can drive it?

The manufacturer says it can be used in a hand drill, drill press or CNC equipment, described broadly as rotating spindles.

Flex-Hone GB41832, 4-1/8 in, 320-Grit Silicon Carbide · photo 3
Additional product photo 3

Alternative options

Product details in Markdown