Loonie PerksDeals for Canada
BlogSearch
Product guide

Flex-Hone BC278240AO 73 mm, 240-Grit Aluminum Oxide Cylinder Hone

Flex-Hone BC278240AO is a 73 mm aluminum oxide honing tool listed for finishing and deburring softer non-ferrous materials, including aluminum, brass and bronze. Its 240-grit abrasive is also described for cylinder deglazing, while the specified bore range makes sizing the job an important first step.

At a glance

  • The manufacturer describes the flexible honing head as self-centering and self-aligning for bore finishing.
  • Can be used in a rotating spindle, including a hand drill, drill press or CNC equipment, according to the listing.
  • Listed for combined finishing and cross-hole deburring in one setup.
  • Manufacturer-stated typical finish is 24 - 32 Microinch (.6 - .8 Micrometer).
Price
$82.98Save 15%

Reference price: $97.07

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • The 240-grit aluminum oxide specification is clearly suited to the listed softer non-ferrous materials.
  • The stated 2.751"-2.875" bore range helps buyers match the tool to a target cylinder size.
  • Designed for both bore finishing and deburring, with use across several types of rotating equipment.

Cons

  • The specified bore range is narrow, so this size is not a general-purpose fit for cylinders outside that interval.

Technical specifications

15 specifications
Identity
BrandFlex-Hone
ModelBC278240AO
Abrasive and use
Material listedAluminum Oxide
Grit240
Bristle typeCrimped Wire
Recommended usesDeburring, Finishing
Compatible materialsAluminum, Brass, Bronze
Size and quantity
Dimensions listed7.3 x 7.3 x 0.1 centimetres
Diameter7.3 centimetres
Number of pieces1
Manufacturer-stated tool dimensions and application range
Bore diameter2.875" (73mm)
Abrasive part length3"
Shank diameter0.245"
Overall length8"
Bore diameter range2.751"-2.875"

What to know before buying

Listing details to confirm

The listing gives different size descriptions: the title and tool details state 2-7/8" (73 mm), while its dimensions field gives 7.3 centimetres and 7.3 x 7.3 x 0.1 centimetres. The listed wire-brush bristle type and wire-brush thread type also do not clarify the flexible honing construction described by the manufacturer. Confirm the selected item and fit details, especially the stated 2.751"-2.875" bore range, before purchase. The manufacturer’s typical finish figure is a claim, not a guaranteed result.

What’s in the box

Included
  • BC 2-7/8" (73MM) 240AO FLEX-HONE

Who is it for?

A good fit for

  • Machinists and engine or cylinder rebuilders seeking a 240-grit hone for a bore in the specified size range.
  • Work involving aluminum, brass, bronze or other softer non-ferrous material where finishing or cross-hole deburring is needed.

Less suited to

  • Buyers whose bore diameter falls outside the stated 2.751"-2.875" range.
  • Anyone needing a different abrasive grit or a tool explicitly specified for a material other than the listed softer non-ferrous materials.
Flex-Hone BC278240AO 73 mm, 240-Grit Aluminum Oxide Cylinder Hone · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 23 ratings
  • 5 stars73%73%
  • 4 stars19%19%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star8%8%

Customer feedback describes the abrasive brush as effective and good quality, and the supplied aggregate ratings lean positive. That feedback is encouraging for routine finishing work, but it does not establish results for a particular bore or material. Match the tool to its listed bore range and abrasive specification.

Positive themes

  • Customer feedback highlights perceived performance and quality.

Frequently asked questions

What bore size is this Flex-Hone listed for?

The manufacturer’s tool details state a 2.875" (73 mm) bore diameter and a use range of 2.751"-2.875". Match your measured bore to that range.

Which materials and grit are specified?

The listing specifies 240 grit with aluminum oxide abrasive and names aluminum, brass and bronze, as well as softer non-ferrous materials in the title.

What work is it intended to do?

It is listed for finishing and deburring, including cylinder deglazing and cross-hole deburring. The manufacturer says it can run in a hand drill, drill press or CNC equipment.

What finish does the manufacturer claim?

The listing says it typically achieves 24 - 32 Microinch (.6 - .8 Micrometer). This is a manufacturer-stated typical result, not a guarantee for every setup or workpiece.

Flex-Hone BC278240AO 73 mm, 240-Grit Aluminum Oxide Cylinder Hone · photo 3
Additional product photo 3

Alternative options

Product details in Markdown