1 / 7Flex-Hone BC23432 Cylinder Hone, 2-3/4 in, 320 Grit
Flex-Hone BC23432 is a flexible cylinder hone listed with a 2-3/4-inch diameter and 320-grit silicon carbide abrasive. Its self-centering design and hand or CNC use suit bore finishing and cross-hole deburring, provided the tool size and abrasive match the job.
At a glance
- Flexible abrasive cylinder hone intended for surface finishing and cross-hole deburring.
- Manufacturer describes the tool as self-centering, self-aligning and self-compensating for wear.
- Listed for use by hand or in CNC equipment.
Reference price: $83.15
Price checked: Nov 20, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- A stated 320-grit silicon carbide abrasive offers a specific finishing selection.
- The self-aligning design may reduce setup demands for bore work, according to the manufacturer.
- The listing describes both manual and CNC use.
Technical specifications
13 specifications| Brand | Flex-Hone |
|---|---|
| Model | BC23432 |
| Abrasive grit material | Silicon Carbide |
|---|---|
| Grit number | 320 |
| Grit type | Extra Fine |
| Compatible material | Metal |
| Recommended uses | Deburring, Finishing, Grinding |
| Bristle type | radial |
| Diameter | 2.75 inches |
|---|---|
| Dimensions listed | 29.2 x 11.9 x 9.4 centimetres |
| Weight listed | 454 g |
| Use | Use by hand or in CNC equipment |
| Material listed | Carborundum |
|---|
What to know before buying
Listing details to confirm
The listing's stated 2-3/4-inch (70 mm) title diameter is not identical to the details value of 2.75 inches, and the overall dimensions appear in differing formats. Confirm the target bore size and selected model before purchase. The title calls the grit size 320, while details also label the grit Extra Fine. Material is listed as both Carborundum and silicon carbide grit material, so check which material specification applies to the tool body and abrasive.
Who is it for?
A good fit for
- Machinists and engine hobbyists finishing a compatible cylinder or bore.
- Buyers seeking a flexible hone for cross-hole deburring and able to operate it by hand or with CNC equipment.
Less suited to
- Buyers who need a rigid hone, a different diameter or grit, or a tool intended for non-metal materials.

Customer reviews on Amazon
- 5 stars
86% 86% - 4 stars
6% 6% - 3 stars
4% 4% - 2 stars
0% 0% - 1 star
4% 4%
Customer feedback describes the abrasive brush as meeting expectations, with positive comments about perceived quality and performance. That is encouraging context for buyers considering its stated finishing and deburring role, but ratings and comments do not establish how it performs on a particular bore, machine or material.
Positive themes
- Customers describe it as a quality product and say it works better than expected.
Frequently asked questions
What diameter is this cylinder hone?
The title states 2-3/4 inches (70 mm), while the details list 2.75 inches. Confirm the intended bore fit against the selected model before ordering.
What abrasive grit does the listing specify?
It identifies silicon carbide and 320 grit, with the detail field also describing the grit type as Extra Fine.
Can it be used by hand?
The listing says it can be used by hand or in CNC equipment. It does not specify a required spindle or operating procedure.
What is this hone intended to do?
The listing describes surface finishing and cross-hole deburring, as well as deburring, finishing and grinding on metal.

Alternative options

Sporacingrts Manual Piston Ring Filer with 120 Grit Grinding Wheel | Manual piston ring filer includes a 120 grit carbide grinding wheel for accurate piston ring end gap adjustment.
$31.50

MOTO4U Piston Pin Puller, Plungers Remover Tool Heavy Duty Wrist Pin Puller-Full Skirt Piston Tool with 5 Adapters Piston Bolts (11mm, 13mm, 16mm, 19mm, 22mm) for Small Engine Repairs in Sliver
$48.99

Xotic Performance™ Tapered Ring Compressor 3.890" Bore | Piston Installation Tool | Engine Assembly Tool | 6061 Aluminum | High-Performance Engine Building | RF008 (3.890")
$52.00

DUZFOREI 8Pcs Bore Brush, Stainless Steel Wire Brush for Drill 1/4 Hex Shank Twisted Wire Cleaning Tools, for Home Cleaning Outdoor Activities Automotive Repair and Maintenance
$18.99

Shineboc Sandpaper Roll 320 Grit, Wet Dry Sand Paper 3-2/3" Wide 11 Yard | Waterproof Silicon Carbide Abrasive, for Automotive Metal Wood Sanding and Polishing
$23.99

SPEEDWOX Engine Cylinder Hone Tool Adjustable Deglazer with 3-Piece 50mm Long Stones 220 Grit Kit Engine Brake Cylinder Hone Adjustable Deglazer for Grinding Holes from 1-1/4"to 3-1/2" Diameter
$21.69

3 Arm Replacement Stones for Engine Cylinder Hone 180 Grit, Easily Inserted and Disassembled Suitable for Various Engines
$10.80

OMT Crankcase Splitter and Installer Tool with 360 Degree Adjustable Arms | 15pc Crank Case Splitter Separator Installer Puller Set for Motorcycle Dirt Bike ATV 2 & 4 Stroke Crankcase
$71.99

YIIFLY M8 x 30mm Flanged Hex Head Bolts Flange Hexagon Screws, M8x1.25 Bolt, 304 Stainless Steel(A2-70), Bright Finish, Fully Threaded, Hexagon Head Bolts, Quantity 15
$15.88

STARESSO D6 PLUS Manual Coffee Grinder | Stainless Steel, Conical Burr
$113.21

Brush Research Manufacturing Flex-Hone Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-3/4" (70 mm) Diameter, 240 Grit Size
$55.19

Brush Research Flex-Hone Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-5/8" (67 mm) Diameter, 320 Grit Size
$66.10
























